Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "combined heat and power (CHP) plant" wg kryterium: Temat


Wyświetlanie 1-6 z 6
Tytuł:
A co-generation power set with a combustion engine fuelled by wood waste gas
Autorzy:
Taler, J.
Mruk, A.
Cisek, J.
Majewski, K.
Powiązania:
https://bibliotekanauki.pl/articles/245220.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
biomass
combined heat and power (CHP) plant
wood gasification
renewable energy sources
internal combustion engine
Opis:
This paper presents a concept and a technical analysis of a co-generation power set with a combustion engine powered by syngas produced in the process of wood waste gasification. The set is composed of a wood waste gas generator fitted with a filter system, a combustion engine, a current generator and heat exchangers. The foundations of the gasification process are described together with the most common solutions used worldwide. Moreover, the methods of adapting spark-ignition and compression-ignition engines to be powered by syngas produced in the wood waste gasification process are presented. The advantages of the presented solution and its possible applications in industry are shown. The assumed technical parameters of the set are as follows: mechanical-electrical energy – 200 kWh, heat recovered from the gasifier – 250 kWh, heat recovered from the engine – 200 kWh. The concept and design of the module cogeneration set is the effect of actions taken by the Institute of Automobiles and Internal Combustion Engines and by the Institute of Thermal Power Engineering of the Cracow University of Technology.
Źródło:
Journal of KONES; 2015, 22, 2; 249-257
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy Effectiveness and Economic Performance of Gas and Gas-Steam Combined Heat and Power Plants Fired with Natural Gas
Efektywność energetyczna i ekonomiczna gazowych oraz gazowo-parowych elektrociepłowni opalanych gazem ziemnym
Autorzy:
Zaporowski, B.
Powiązania:
https://bibliotekanauki.pl/articles/397630.pdf
Data publikacji:
2016
Wydawca:
ENERGA
Tematy:
natural gas
combined heat and power (CHP) plant
energy effectiveness
economic effectiveness
gaz ziemny
elektrociepłownia
efektywność energetyczna
efektywność ekonomiczna
Opis:
The paper presents the energy and economic effectiveness analysis of technological systems of gas and gas-steam combined heat and power (CHP) plants. For the analysis the following five technological systems of gas and gas-steam CHP plants fired with natural gas were chosen: (1) large-scale gas-steam CHP unit with three-pressure heat recovery steam generator (HRSG) and steam reheat and extraction-condensing steam turbine, (2) middle-scale gas-steam CHP unit with two-pressure HRSG and extraction-condensing steam turbine (3) middle-scale gas-steam CHP unit with one-pressure HRSG and extraction-condensing steam turbine, (4) small-scale gas CHP unit with gas turbine working in simple cycle and (5) gas CHP unit with gas engine. For the energy effectiveness evaluation of particular analyzed technological systems of cogeneration units the following quantities were determined: efficiency of electricity produced in cogeneration, efficiency of heat produced in cogeneration, overall efficiency of cogeneration unit, power to heat ratio and primary energy savings (PES). As a criterion characterizing the economic effectiveness of the analyzed CHP units the specific electricity generation cost, discounted for 2015 was chosen. The results of the performed analysis are presented in Tables and in Figures.
W artykule została przedstawiona analiza efektywności energetycznej i ekonomicznej układów technologicznych gazowych oraz gazowo-parowych elektrociepłowni opalanych gazem ziemnym. Do analizy zostało wybranych pięć następujących układów tech- nologicznych gazowych i gazowo-parowych elektrociepłowni opalanych gazem ziemnym: (1) ciepłowniczy blok gazowo-parowy dużej mocy z 3-ciśnieniowym kotłem odzysknicowym i międzystopniowym przegrzewaniem pary oraz upustowo-kondensacyjną turbiną parową, (2) ciepłowniczy blok gazowo-parowy średniej mocy z 2-ciśnieniowym kotłem odzysknicowym i upustowo- -kondensacyjną turbiną parową, (3) ciepłowniczy blok gazowo-parowy średniej mocy z 1-ciśnieniowym kotłem odzysknicowym i upustowo-kondensacyjną turbiną parową, (4) ciepłowniczy blok gazowy z turbiną gazową małej mocy pracującą w obiegu prostym i (5) ciepłowniczy blok gazowy z silnikiem gazowym. Dla oceny efektywności energetycznej poszczególnych układów technolo- gicznych skojarzonego wytwarzania energii elektrycznej i ciepła wyznaczono następujące wielkości: sprawność wytwarzania energii elektrycznej, sprawność wytwarzania ciepła, sprawność ogólną elektrociepłowni, wskaźnik skojarzenia i oszczędność energii pier- wotnej. Jako kryterium oceny efektywności ekonomicznej analizowanych układów technologicznych skojarzonego wytwarzania energii elektrycznej i ciepła wybrano jednostkowe koszty wytwarzania energii elektrycznej, zdyskontowane na 2015 rok. Wyniki wykonanej analizy zostały przedstawione w tablicach i na wykresie.
Źródło:
Acta Energetica; 2016, 1; 152-157
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sustainable development of generation sources in the National Electric Power System
Zrównoważony rozwój źródeł wytwórczych w Krajowym Systemie Elektroenergetycznym
Autorzy:
Zaporowski, Bolesław
Powiązania:
https://bibliotekanauki.pl/articles/2048487.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
sustainable development
National Electric Power System
NEPS
power plant
combined heat and power (CHP) plant
electricity generation costs
zrównoważony rozwój
Krajowy System Elektroenergetyczny
KSE
elektrownia
elektrociepłownia
koszty wytwarzania energii elektrycznej
Opis:
This article presents an analysis of the sustainable development of generation sources in the Polish National Electric Power System (NEPS). First, the criteria for this development were formulated. The paper also discusses the current status of generation sources, operating in power plants and combined heat and power (CHP) plants of NEPS. Furthermore, it includes a prediction of power balance in NEPS, determining; predicted electricity gross use, predicted demand for peak capacity during the winter peak, predicted demand for peak capacity during the summer peak and required new capacity of centrally dispatched generation units (CDGUs) in 2025, 2030, 2035 and 2040 that would ensure NEPS operational security. Twenty prospective technologies of electricity generation and combined electricity and heat production were analyzed. These were divided into three groups: system power plants, high- and medium-capacity combined heat and power (CHP) plants, as well as small-capacity power plants and CHP plants (dispersed sources). The unit costs of electricity generation discounted for 2021 were calculated for the analyzed technologies, taking the costs of CO2 emission allowances into account. These costs include: capital costs, fuel costs, maintenance costs, operation costs and environmental costs (CO2 emission allowances). This proceeds to a proposal of a program of the sustainable development of generation sources in NEPS, which includes the desired capacity structure of power plants and CHP plants, and the optimal structure of electricity production in 2030 and 2040. The results of calculations and analyses are presented in tables and figure.
W artykule przedstawiono analizę zrównoważonego rozwoju źródeł wytwórczych w Krajowym Systemie Elektroenergetycznym (KSE). Sformułowano kryteria zrównoważonego rozwoju systemu elektroenergetycznego. Przedstawiono aktualny stan źródeł wytwórczych w KSE, pracujących w elektrowniach i elektrociepłowniach. Opracowano prognozę bilansu mocy w KSE, wyznaczając: prognozowaną wartość zużycia elektrycznej brutto, obciążenia KSE w szczycie zimowym i szczycie letnim oraz wymaganej mocy JWCD i mocy źródeł rozproszonych, narastająco na lata 2025, 2030, 2035 i 2040, dla bezpieczeństwa pracy KSE. Zdefiniowano 20 przyszłościowych technologii wytwarzania energii elektrycznej i skojarzonego wytwarzania energii elektrycznej i ciepła, podzielonych na trzy następujące grupy: elektrownie systemowe, elektrociepłownie dużej i średniej mocy oraz elektrownie i elektrociepłownie małej mocy (źródła rozproszone). Dla wybranych do analizy technologii wytwórczych wyznaczono jednostkowe, zdyskontowane na 2021 rok, koszty wytwarzania energii elektrycznej, z uwzględnieniem kosztów uprawnień do emisji CO2. W kosztach tych uwzględniono: koszty kapitałowe, koszty paliwa, koszty remontów, koszty obsługi i koszty środowiskowe. Opracowano propozycję programu zrównoważonego rozwoju źródeł wytwórczych w KSE, wyznaczając pożądaną strukturę mocy elektrowni i elektrociepłowni oraz produkcji energii elektrycznej w latach 2030 i 2040.
Źródło:
Polityka Energetyczna; 2021, 24, 3; 79-92
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Possibility to use a Nuclear Power Plant as a Source of Electrical Energy and Heat
Możliwość wykorzystania elektrowni jądrowej jako źródła energii elektrycznej i cieplnej
Autorzy:
Minkiewicz, T.
Reński, A.
Powiązania:
https://bibliotekanauki.pl/articles/397125.pdf
Data publikacji:
2014
Wydawca:
ENERGA
Tematy:
nuclear power plant
cogeneration
combined heat and power (CHP)
elektrownia jądrowa
elektrociepłownia jądrowa
praca w skojarzeniu
Opis:
In this article issues concernig the possibility of nuclear power plant (NPP) operation also as a source of heat, which means combined heat and power production, have been described. CHP work is possible and profitable only in those areas where high thermal power demand occurs, which means near city agglomerations such as Warsaw or the Tri-City. Two levels of thermal power delivered to the heating system have been considered. Preliminary technical and economic studies regarding NPP location by Żarnowiec Lake have confirmed the NPP potential to work as a primary source of heat in the heating network system, which would feed the regions of Wejherowo and Gdynia.
Autorzy przedstawili w artykule zagadnienia związane z możliwością pracy elektrowni jądrowej (EJ) również w charakterze źródła ciepła, a więc w warunkach skojarzonego wytwarzania energii elektrycznej oraz ciepła. Praca w skojarzeniu jest możliwa i opłacalna tylko w tych rejonach, w których występuje duże zapotrzebowanie na moc cieplną, a więc w pobliżu aglomeracji miejskich, takich jak np. aglomeracja warszawska czy trójmiejska. Rozpatrzono dwa poziomy mocy cieplnych oddawanych do systemów ciepłowniczych. Wstępne badania techniczne i ekonomiczne dla lokalizacji elektrowni jądrowej nad Jeziorem Żarnowieckim potwierdziły potencjalną możliwość pracy EJ w charakterze podstawowego źródła ciepła w systemie ciepłowniczym, który zasilałby rejon Wejherowa i Gdyni.
Źródło:
Acta Energetica; 2014, 3; 114-122
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A mathematical model of two-stage Solid Oxide Fuel Cell, SOFC, stacks for dynamic simulation of Combined Heat and Power system fed by natural gas
Autorzy:
Palus, Mateusz
Pianko-Oprych, Paulina
Powiązania:
https://bibliotekanauki.pl/articles/1849268.pdf
Data publikacji:
2021
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
dynamic model
natural gas
Solid Oxide Fuel Cell stacks
Combined Heat and Power
CHP
system
Balance of Plant
BoP
modelling
Catalytic Partial Oxidation
CPOx
reformer
steam reformer
Opis:
Zero-dimensional two-stage SOFC stacks dynamic model was developed to investigate the effect of operating parameters on stacks performance. The model resolves spatially thermal and thermo-electrochemical behaviour for electrochemical reactions, Catalytic Partial Oxidation and Steam Reforming processes. Design variables and thermo-electrochemical properties were obtained from in-house-fabricated SOFCs carried out by project partners. The completed SOFCs based Combined Heat and Power, CHP, system model was validated by data18 and numerical results obtained at steady-state mode showing its high-fidelity. A parametric study with respect to key operating parameters including changes in fuel utilization, lambda number and current density values was conducted. The global CHP system dynamic response, in term of the current/voltage delivered by two-stage SOFC stacks, under a fi xed fuel utilization, has been determined resulting in greater variations in the voltage of a single cell in the first stack in comparison to the corresponding values in the second stack.
Źródło:
Polish Journal of Chemical Technology; 2021, 23, 2; 1-11
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A mathematical model of two-stage Solid Oxide Fuel Cell, SOFC, stacks for dynamic simulation of Combined Heat and Power system fed by natural gas
Autorzy:
Palus, Mateusz
Pianko-Oprych, Paulina
Powiązania:
https://bibliotekanauki.pl/articles/1849273.pdf
Data publikacji:
2021
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
dynamic model
natural gas
Solid Oxide Fuel Cell stacks
Combined Heat and Power
CHP
system
Balance of Plant
BoP
modelling
Catalytic Partial Oxidation
CPOx
reformer
steam reformer
Opis:
Zero-dimensional two-stage SOFC stacks dynamic model was developed to investigate the effect of operating parameters on stacks performance. The model resolves spatially thermal and thermo-electrochemical behaviour for electrochemical reactions, Catalytic Partial Oxidation and Steam Reforming processes. Design variables and thermo-electrochemical properties were obtained from in-house-fabricated SOFCs carried out by project partners. The completed SOFCs based Combined Heat and Power, CHP, system model was validated by data18 and numerical results obtained at steady-state mode showing its high-fidelity. A parametric study with respect to key operating parameters including changes in fuel utilization, lambda number and current density values was conducted. The global CHP system dynamic response, in term of the current/voltage delivered by two-stage SOFC stacks, under a fi xed fuel utilization, has been determined resulting in greater variations in the voltage of a single cell in the first stack in comparison to the corresponding values in the second stack.
Źródło:
Polish Journal of Chemical Technology; 2021, 23, 2; 1-11
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies