Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Yao, J." wg kryterium: Autor


Tytuł:
Energy Band and Absorption Coefficient of Quantum Dots in a Well Structure
Autorzy:
Zhang, P.
Lu, X.
Zhang, C.
Yao, J.
Powiązania:
https://bibliotekanauki.pl/articles/1419887.pdf
Data publikacji:
2012-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.21.La
73.63.Kv
Opis:
Building on the effective-mass envelope function theory, this paper focuses on the study of the energy band and the absorption coefficient of $InAs//In_{x}Ga_{1 - x}As$ quantum dots in a well (DWELL) structure. In contrast to $InAs//In_{0.15}Ga_{0.85}As$ quantum DWELL, the $InAs//In_{0.2}Ga_{0.8}As$ quantum DWELL has lower ground states. With the thickness of $In_{0.15}Ga_{0.85}As$ layer changing from 7 nm to 9 nm and $In_{0.2}Ga_{0.8}As$ layer changing from 9 nm to 12 nm, the calculation shows that their absorption coefficient spectra takes a red shift in the long-wave infrared and far-infrared ranges, respectively. Moreover, when the thickness of the $In_{x}Ga_{1 - x}As$ layer is defined as 9 nm, the absorption coefficient spectra of $InAs//In_{0.2}Ga_{0.8}As$ DWELL shows a obvious red shift comparing with that of $InAs//In_{0.15}Ga_{0.85}As$ DWELL.
Źródło:
Acta Physica Polonica A; 2012, 122, 1; 197-201
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical Prosperities of Ag-ZnO Composition Nanofilm Synthesized by Chemical Bath Deposition
Autorzy:
Wang, Y.
Yao, J.
Jia, G.
Lei, H.
Powiązania:
https://bibliotekanauki.pl/articles/1505423.pdf
Data publikacji:
2011-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.15.Lm
78.66.Hf
78.55.Et
68.37.Hk
Opis:
Ag-ZnO composite thin films were prepared on glass substrates by chemical bath deposition at lower temperature. The samples were characterized by X-ray diffraction, scanning electron microscopy, photoluminescence and the optical transmission spectra. The morphology analysis showed that Ag nanoparticles were not deposited on the ZnO nanorods surface but on the glass substrate. The influence of the reaction time on the size and density of Ag nanoparticles was studied, the results showed that the reaction time played an important role in determining of the optical characteristics. There were two obvious photoluminescence peaks located at about 395 nm and 471 nm, respectively. The blue emission centered at 471 nm can be ascribed to the electron transition from $Zn_{i}$ to $V_{Zn}$.
Źródło:
Acta Physica Polonica A; 2011, 119, 3; 451-454
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the influence on expressway safety of ramps
Autorzy:
Hu, J. J.
Li, F.
Han, B.
Yao, J.
Powiązania:
https://bibliotekanauki.pl/articles/224137.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
expressway safety
safety
on and off ramp
delay
accidents occurrence probability
droga ekspresowa
bezpieczeństwo na drodze ekspresowej
rampa włączania i wyłączania
opóźnienie
prawdopodobieństwo wystąpienia awarii
Opis:
As the very important parts of the expressway system, on and off ramps have a great effect on the operation effect of expressways. Once congestion occurs at on and off ramps, it will directly affect the safety of the expressway and vehicles. So this paper first analyzes the location design of on ramps, the length and the influences on the expressway running state of off ramp downstream traffic state, and establishes the expressway operation models based at on and off ramps. The expressway operation models include off ramp delay model, on ramp delay model, expressway delay model and side road delay model under the influence of the distance between on and off ramp and traffic volume. At the same time, the paper analyzes the connection between the traffic operation state and traffic safety, and establishes the expressway safety model based on congestion degree. Through simulation verification, the impact of on and off ramp on the security of the expressway is analyzed. In the simulation, safety rank division is simulated to verify and safety index of different safety ranks. Finally the paper concludes that the delay caused by traffic of the on and off ramps can decrease the safety of expressway.
Źródło:
Archives of Transport; 2017, 43, 3; 43-51
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Traffic fatalities prediction based on support vector machine
Autorzy:
Li, T.
Yang, Y.
Wang, Y.
Chen, C.
Yao, J.
Powiązania:
https://bibliotekanauki.pl/articles/223743.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
traffic accident
support vector machine
SVM
particle swarm optimization (PSO)
PSO
prediction model
optimal parameters
wypadek drogowy
Particle Swarm Optimization
model prognostyczny
optymalne parametry
Opis:
To effectively predict traffic fatalities and promote the friendly development of transportation, a prediction model of traffic fatalities is established based on support vector machine (SVM). As the prediction accuracy of SVM largely depends on the selection of parameters, Particle Swarm Optimization (PSO) is introduced to find the optimal parameters. In this paper, small sample and nonlinear data are used to predict fatalities of traffic accident. Traffic accident statistics data of China from 1981 to 2012 are chosen as experimental data. The input variables for predicting accident are highway mileage, vehicle number and population size while the output variables are traffic fatality. To verify the validity of the proposed prediction method, the back-propagation neural network (BPNN) prediction model and SVM prediction model are also used to predict the traffic fatalities. The results show that compared with BPNN prediction model and SVM model, the prediction model of traffic fatalities based on PSO-SVM has higher prediction precision and smaller errors. The model can be more effective to forecast the traffic fatalities. And the method using particle swarm optimization algorithm for parameter optimization of SVM is feasible and effective. In addition, this method avoids overcomes the problem of “over learning” in neural network training progress.
Źródło:
Archives of Transport; 2016, 39, 3; 21-30
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Some Variables on the Fibre Packing Pattern in a Yarn Cross-section for Vortex Spun Yarn
Wpływ wybranych zmiennych na upakowanie włókien w przekroju poprzecznym przędzy typu vortex
Autorzy:
Zou, Z.
Zheng, S
Cheng, L
Xi, B
Yao, J.
Powiązania:
https://bibliotekanauki.pl/articles/233743.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
vortex spun yarn
process parameter
fibre packing density
yarn structure
vortex
rozkład włókien
wir przędzy
parametr procesu
grubość przędzy
struktura przędzy
Opis:
This paper examined the influence of various parameters such as fibre fineness, yarn count, distance from the front roller nip point to the hollow spindle, nozzle pressure and yarn delivery speed on the fibre packing pattern in a yarn cross-section for vortex spun yarn. Cross-section images of vortex spun yarns were used to evaluate the fibre packing pattern. Results from different variables influencing the fibre packing pattern for vortex spun yarn were also analysed. The results indicated that the fibre fineness, yarn count, distance from the front roller nip point to the hollow spindle, nozzle pressure and yarn delivery speed are all significant parameters for yarn hairiness and fibre packing density in a vortex spun yarn cross-section.
Badano wpływ grubości włókien, masy liniowej przędzy, odległości przedniej rolki do wydrążonego wrzeciona, ciśnienia w dyszy i szybkości podawania przędzy na upakowanie włókien w przekroju poprzecznym przędzy przędzionej systemem vortex. Zdjęcia przekrojów poprzecznych przędzy zostały wykorzystane dla oceny upakowania włókien. Wyniki analizy rozkładów włókien wykazały, że wszystkie badane parametry mają wydatny wpływ na upakowanie i włochatość w przędzy przędzionej systemem vortex.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 2 (104); 40-46
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solution Growth of Well-Aligned ZnO Nanorods on Sapphire Substrate
Autorzy:
Jia, G.
Hao, B.
Lu, X.
Wang, X.
Li, Y.
Yao, J.
Powiązania:
https://bibliotekanauki.pl/articles/1399510.pdf
Data publikacji:
2013-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.37.Yz
78.40.Fy
68.55.J-
Opis:
Vertically well-aligned ZnO nanorods arrays were synthesized on sapphire substrates by chemical bath deposition. Those sapphire substrates were seeded to control the density and orientation of ZnO nanorods using sol-gel method. Well-aligned and uniformly distributed ZnO nanorods in a large scale were obtained with strongly (002) preferential orientation. The structural properties were characterized by X-ray diffraction spectrometer and morphological characteristics were analyzed by scanning electron microscopy, respectively. The ZnO nanorods are obvious hexangular wurtzite structure and preferentially oriented along the c-axis (002) and growth vertically to the substrates. The optical properties were further thoroughly studied. What is more, the influences of the strain between substrate and ZnO nanorods due to thickness of the ZnO seed-layer on the characteristics and optical properties of ZnO were also analyzed.
Źródło:
Acta Physica Polonica A; 2013, 124, 1; 74-77
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low atmospheric density measurement based on Rayleigh scattering of an ultraviolet laser
Autorzy:
Wang, R
Yao, J.
Zhong, K.
Miao, Y.
Cui, H.
Zhao, X.
Zhang, C.
Powiązania:
https://bibliotekanauki.pl/articles/174910.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
atmospheric density measurement
Rayleigh scattering
ultraviolet laser
Opis:
The qualitative measurement of low atmospheric density in the air flow field has been investigated in this paper. The supersonic flow field with Mach number of 1.5 around the NACA0006 aerofoil has been numerically simulated and the transient slight pressure and low density atmosphere have been experimentally determined based on Rayleigh scattering of a 266 nm ultraviolet laser. The scattering patterns have been effectively captured under different atmospheric pressure of 4.5, 92, 470 and 710 Pa with laser energy of only 0.5 mJ. It has been demonstrated that in the pressure range from 4.5 to 1100 Pa, corresponding to the atmospheric density from 4.8105×10–5 kg/m3 to 1.279×10–2 kg/m3, the scattering intensity of an ultraviolet laser is linear to the pressure and density with the slope coefficient of 0.00968 a.u./Pa and 0.83226 a.u./(kg/m3×10–3). It has been proved that Rayleigh scattering is a promising technology for observation of instantaneous and multidimensional distribution of a supersonic flow field.
Źródło:
Optica Applicata; 2013, 43, 3; 597-605
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
HRTF Adjustments with Audio Quality Assessments
Autorzy:
Yao, S. N.
Chen, L. J.
Powiązania:
https://bibliotekanauki.pl/articles/950215.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
HRTF
PEAQ
cone of confusion
headphones
surround
Opis:
There are an increasing number of binaural systems embedded with head-related transfer functions (HRTFs), so listeners can experience virtual environments via conventional stereo loudspeakers or head- phones. As HRTFs vary from person to person, it is difficult to select appropriated HRTFs from already existing databases for users. Once the HRTFs in a binaural audio device hardly match the real ones of the users, poor localization happens especially on the cone of confusion. The most accurate way to obtain personalized HRTFs might be doing practical measurements. It is, however, expensive and time consuming. Modifying non-individualized HRTFs may be an effort-saving way, though the modifications are always accompanied by undesired audio distortion. This paper proposes a flexible HRTF adjustment system for users to define their own HRTFs. Also, the system can keep sounds from suffering intolerable distortion based on an objective measurement tool for evaluating the quality of processed audio.
Źródło:
Archives of Acoustics; 2013, 38, 1; 55-62
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Improved Robust Kalman Filter in Data Fusion for PPP/INS Tightly Coupled Positioning System
Autorzy:
Li, Z.
Yao, Y.
Wang, J.
Gao, J.
Powiązania:
https://bibliotekanauki.pl/articles/221374.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
PPP/INS tightly coupled positioning
robust filter
IGG scheme
Mahalanobis distance
Opis:
A robust Kalman filter improved with IGG (Institute of Geodesy and Geophysics) scheme is proposed and used to resist the harmful effect of gross error from GPS observation in PPP/INS (precise point positioning/inertial navigation system) tightly coupled positioning. A new robust filter factor is constructed as a three-section function to increase the computational efficiency based on the IGG principle. The results of simulation analysis show that the robust Kalman filter with IGG scheme is able to reduce the filter iteration number and increase efficiency. The effectiveness of new robust filter is demonstrated by a real experiment. The results support our conclusion that the improved robust Kalman filter with IGG scheme used in PPP/INS tightly coupled positioning is able to remove the ill effect of gross error in GPS pseudorange observation. It clearly illustrates that the improved robust Kalman filter is very effective, and all simulated gross errors added to GPS pseudorange observation are successfully detected and modified.
Źródło:
Metrology and Measurement Systems; 2017, 24, 2; 289-301
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Robust L2 consensus of high-order swarm systems with time-varying delays
Autorzy:
Xi, J
Yao, Z
Liu, G.
Zhong, Y.
Powiązania:
https://bibliotekanauki.pl/articles/205770.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
consensus
swarm system
uncertainty
time delay
disturbance rejection
Opis:
Consensus problems for high-order continuous-time swarm systems in directed networks with time delays, uncertainties and external disturbances are investigated. Firstly, the state space of a swarm system is decomposed into a consensus subspace (CS) and a complement consensus space (CCS). A necessary and sufficient condition for the system with time delays and uncertainties to achieve consensus is presented based on the state projection on CCS, and an explicit expression of the consensus function is shown on the basis of the state projection on CS. Then, a sufficient condition for the system to achieve consensus with a desired L2 performance is given. Finally, numerical simulations are shown to demonstrate theoretical results.
Źródło:
Control and Cybernetics; 2014, 43, 1; 59-77
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plasma Grafting with Methyl Di-Ally Ammonium Salt to Impart Anti-Bacterial Properties to Polypropylene
Szczepienie plazmowe z udziałem soli dialliludimetyloamoniowej dla nadania właściwości antybakteryjnych materiałom polipropylenowym
Autorzy:
Yao, W.-H.
Tsou, C.-H.
Chen, J.-C.
Powiązania:
https://bibliotekanauki.pl/articles/234265.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
low-temperature plasma
polypropylene nonwoven
methyl di-ally ammonium salt
quaternary ammonium salt
graft
antibacterial property
hydrophilicity
szczepienie plazmowe
włóknina polipropylenowa
aktywność antybakteryjna
hydrofilowość
Opis:
Quaternary methyl di-ally ammonium salt (MDAA) was grafted on the surface of a polypropylene (PP) nonwoven using a low-temperature radio frequency discharge plasma. The graft ratio of MDAA to PP increased with the grafting temperature; at low grafting temperatures (30 or 60 °C), the graft ratio increased with the H2SO4 catalyst concentration, but at a high grafting temperature (80 °C), it was not affected, even without the use of an acid catalyst. The finished PP nonwoven exhibited excellent antibacterial activities toward Staphylococcus aureus, suggesting that plasma grafting is an effective method.
Czwartorzędową solą metylodialliloamoniową (MDAA) szczepiono powierzchnię włókniny polipropylenowej stosując niskotemperaturową plazmę o częstotliwości radiowej. Stosunek szczepienia MDAA do PP wzrastał ze wzrostem temperatury szczepienia, przy niskich temperaturach szczepienia (30 lub 60°C) stosunek szczepienia wzrastał ze wzrostem stężenia katalizatora H2SO4, natomiast przy wysokich temperaturach szczepienia (80°C) nie zaobserwowano wpływu nawet bez stosowania kwasowego katalizatora. Wykończone włókniny polipropylenowe wykazywały doskonałą aktywność anytbakteryjną w stosunku do Staphylococcus aureus. Wyniki badań wskazują, że szczepienie plazmowe jest efektywną metodą uzyskiwania właściwości anytbakteryjnych.
Źródło:
Fibres & Textiles in Eastern Europe; 2016, 3 (117); 117-123
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Interface Engineering in Heteroepitaxy
Autorzy:
Hong, S. K.
Chen, Y.
Ko, H. J.
Yao, T.
Powiązania:
https://bibliotekanauki.pl/articles/2035571.pdf
Data publikacji:
2002
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.35.-p
68.35.Dv
81.15.-z
81.15.Hi
81.10.Aj
Opis:
We report the importance of interface engineering in heteroepitaxy with examples of plasma-assisted molecular beam epitaxial ZnO growths on (0001) sapphire substrates and on (0001) GaN/sapphire templates, whose interfaces are engineered to improve and to control properties of ZnO films. The growth of rocksalt structure MgO buffer on Al$\text{}_{2}$O$\text{}_{3}$ (0001) is developed for ZnO epitaxy. By employing the MgO buffer layer, the formation of 30$\text{}^{o}$ rotated mixed domains is prohibited and two-dimensional layer-by-layer growth of ZnO on sapphire substrate is achieved. High-resolution X-ray diffraction reveals the superior improvement in a crystal quality of ZnO films with an MgO buffer. Polarity of wurtzite structure ZnO films on Ga-polar GaN/sapphire templates is controlled by changing interface structures. By forming a single crystalline, monoclinic Ga$\text{}_{2}$O$\text{}_{3}$ interfacial layer between GaN and ZnO through O-plasma pre-exposure on the Ga-polar GaN surface, O-polar ZnO films are grown. By forming the ZnO/GaN heterointerface without an interfacial layer through the Zn pre-exposure on the Ga-polar GaN surface, Zn-polar ZnO films are grown.
Źródło:
Acta Physica Polonica A; 2002, 102, 4-5; 541-554
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics of the staminate flower and pollen from autotetraploid Betula platyphylla
Autorzy:
Lin, L.
Yao, Q.
Xu, H.
Mu, H.
Jiang, J.
Powiązania:
https://bibliotekanauki.pl/articles/41710.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Opis:
Comparison of the staminate flower and pollen of Betula platyphylla between autotetraploid and diploid individuals may reveal the reason for cross sterility when an autotetraploid male parent is crossed with a diploid female parent. Staminate flowers and pollen from seven autotetraploid individual trees were examined. The morphologies of the staminate flower and pollen and pollen germination of these autotetraploid individuals were compared with diploid trees. The structure of the staminate flower did not differ between autotetraploids and diploids, whereas the size of the staminate flower was larger in the autotetraploids compared with the diploids. The mean diameter and pore depth of the pollen were significantly larger in autotetraploid individuals compared with diploids, and several abnormalities in pollen morphology were found commonly amongst pollen from the autotetraploid trees. The germination rate of pollen from autotetraploids was significantly inferior to that of diploids and there was a significant negative correlation between germination rate and the percentage of abnormal pollen. These results demonstrate that the autotetraploid should not be chosen as the male parent to obtain hybrid triploid progenies because the pollen is abnormal and results in low fertility despite its large size. The results provide important information for selecting and distributing parent strains with the aim of building seed orchards of triploid birch trees.
Źródło:
Dendrobiology; 2013, 69
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simultaneous removal of SO2 and NOx from sintering flue gas using ammonia-Fe(II)EDTA combined with electrolytic regeneration
Autorzy:
Liang, Y.
Yao, X.
Quin, L.
Chen, W.
Han, J.
Powiązania:
https://bibliotekanauki.pl/articles/208117.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ammonia
desulfurization
flue gases
nitrogen oxides
nitrogen removal
sintering sulfur dioxide
amoniak
odsiarczanie
gazy odlotowe
tlenki azotu
usuwanie azotu
spiekanie
ditlenek siarki
Opis:
Sulfur dioxide and nitrogen oxide are health hazardous gases, which contribute to the formation of submicron acidic particulates. To reduce SO2 and NOx emission from the sintering flue gas, the combination of ammonia-Fe(II)EDTA solution scrubbing with Fe(III) electrolytic regeneration is proposed. The above method has the following advantages: direct conversion of NOx and SO2 to harmless N2 and SO4 2−, recovery of the by-product (NH4)2SO4), simultaneous removal of NOx and SO2 emission from flue gas in the reactor. The effect of the pH, initial Fe(II)EDTA concentration, and voltage on the desulfurization and denitration efficiencies was investigated using a bench-scale reactor. The maximal desulfurization and denitration efficiencies were 98% and 52%, respectively. The optimum parameters were pH ˃ 5.0, 2.1 V, and 0.05 mol·dm–3 Fe(II)EDTA concentration. SO2 and NOx removal from the sintering flue gas by ammonia-Fe(II)EDTA solution scrubbing combined with electrolytic regeneration was also demonstrated in a pilot-scale reactor.
Źródło:
Environment Protection Engineering; 2018, 44, 2; 19-36
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical test on polystyrene tunnel seismic-isolation material
Autorzy:
He, J.
Chen, W.
Zhao, W.
Huang, S.
Yao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/779643.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
polystyrene plastic foam
constitutive model
high intensity
tunnel
seismic-isolation layer
Opis:
Stress-strain mechanical properties of polystyrene foam plastic material were tested under different loading conditions. An empirical constitutive model for describing metal materials was proposed for the polystyrene plastic foam. The static and dynamic tests results show that the ductility and watertightness of the polystyrene plastic foam are significantly improved. At the same time, in order to check its seismic-isolation property, the high-performance foam concrete as filling materials of Galongla tunnel in Tibet was simulated by FEM. The simulated results show that the polystyrene plastic foam can remarkably decrease the stress and the plastic zone in final lining, so it can effectively reduce the seismic damage of the tunnel. Considering the seismic-isolation property and low price of polystyrene plastic foam, it is a good reference for the anti-seismic design of tunnels in high intensity zones.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 3; 122-127
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies