Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Piotr Kalinowski." wg kryterium: Autor


Wyświetlanie 1-7 z 7
Tytuł:
Evaluation of the NO2 concentration prediction possibility based on static and dynamic responses of TGS sensors at changing humidity levels
Autorzy:
Kalinowski, Paweł
Woźniak, Łukasz
Jasiński, Grzegorz
Jasiński, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/220989.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
TGS sensors
partial least squares
nitrogen dioxide
dynamic measurements
Opis:
The commercially available metal-oxide TGS sensors are widely used in many applications due to the fact that they are inexpensive and considered to be reliable. However, they are partially selective and their responses are influenced by various factors, e.g. temperature or humidity level. Therefore, it is important to design a proper analysis system of the sensor responses. In this paper, the results of examinations of eight commercial TGS sensors combined in an array and measured over a period of a few months for the purpose of prediction of nitrogen dioxide concentration are presented. The measurements were performed at different relative humidity levels. PLS regression was employed as a method of quantitative analysis of the obtained sensor responses. The results of NO2 concentration prediction based on static and dynamic responses of sensors are compared. It is demonstrated that it is possible to predict the nitrogen dioxide concentration despite the influence of humidity.
Źródło:
Metrology and Measurement Systems; 2020, 27, 1; 167-179
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A milling machine used for groove making in a tubing inter-rib niche
Autorzy:
Cichoń, Tomasz
Pyrek, Krzysztof
Ratuszny, Krystian
Kalinowski, Piotr
Kamiński, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/1819281.pdf
Data publikacji:
2019
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
tubing milling machine
shaft lining repairs
tubing lining
frezarka do tubingów
naprawa obudowy szybu
obudowa tubingowa
Opis:
The sealing of shaft cast iron tubing within a tubing Inter-rib niche is often needed during overhauls and repairs of a shaft lining. Leakages or scratches and fractures can occur within the area of individual tubing of the shaft lining. The Przedsiębiorstwo Budowy Szybów S.A. developed special method for the sealing in question. Around the sealed area, a closed circumference groove of a depth smaller than the tubing thickness is made in the inner shaft lining. The sealing element is placed in this groove and then tightened with a spatial insert, with a hole for the injection of the sealing medium. A specially designed milling machine is used for groove making in the tubing lining of the mine shaft. The milling machine is composed of: power transmission system, special construction for mounting the milling machine to tubing and advance mechanism. The milling machine is driven by a battery drill-driver, and the whole device is mounted to the tubing with the use of specially designed guides with handles.
Źródło:
Mining – Informatics, Automation and Electrical Engineering; 2019, 57, 3; 27--36
2450-7326
2449-6421
Pojawia się w:
Mining – Informatics, Automation and Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Individual rail transport and the conception of a means of transport using a suspended railway track
Autorzy:
Kuźma, Kazimierz
Pyrek, Krzysztof
Kocik, Wojciech
Kalinowski, Piotr
Kamiński, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/1819296.pdf
Data publikacji:
2019
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
suspended bike
individual mean of underground transport
Opis:
Distances to cover are still growing in Polish coal mines. It is not a real issue in terms of material and staff transport, which commonly uses suspended monorails with a friction wheel drive. The problem is how to transfer single people and small loads behind the scheduled times and routes of monorails. The goal of this work was to design and construct an individual mean of transport with its own drive using a monorail track which would meet the requirements of law, safety, mobility and can be used behind the scheduled times of monorails.
Źródło:
Mining – Informatics, Automation and Electrical Engineering; 2019, 57, 3; 47--57
2450-7326
2449-6421
Pojawia się w:
Mining – Informatics, Automation and Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Accelerating computation of a reduced order model of a structural system resulting from Craig–Bampton reduction using GPU programming
Autorzy:
Górecki, Piotr
Kalinowski, Miłosz
Jeziorek, Łukasz
Broniszewski, Jakub
Koziara, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/38706110.pdf
Data publikacji:
2024
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
GPU
CPU
reduced order model
structural model
CuPy array library
model zredukowanego zamówienia
model strukturalny
CuPy
Opis:
The Craig–Bampton (CB) method is a well-known substructuring technique that reduces the size of a finite element model (FEM) using a set of vibration modes. For large FEA models, the reduction process could be computationally expensive since it requires algebra operations on FEM mode shapes and FEM system sparse matrices. In this paper, we investigate the potential of usage of GPU parallel processing to speed up solving the system of linear equations that results from the CB reduction process made for a model of cyclic structures. A Python based high-level approach, employing the CuPy, GinkGo and STRUMPACK libraries on the GPU, is compared with an optimized Fortran code. In side-to-side comparisons, employing the same inputs, the Python-GPU code is run on a single GPU device and the Fortran code is run on a multi-core compute node. The CB reduction process was split into several parts, each dealing with different kind of algebraic formulation of the problem. Performance comparisons were focused on the sparse system linear solver, since it turned out to be the most time-consuming part. The results suggest that the current GPU-based linear sparse solvers do not surpass the state-of-the-art CPU-based MKL PARDISO solver (at least up to 1M DOFs).
Źródło:
Computer Assisted Methods in Engineering and Science; 2024, 31, 1; 51-66
2299-3649
Pojawia się w:
Computer Assisted Methods in Engineering and Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A milling machine used for groove making in a tubing inter-rib niche
Autorzy:
Cichoń, Tomasz
Pyrek, Krzysztof
Ratuszy, Krystian
Kalinowski, Piotr
Kamiński, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/1819289.pdf
Data publikacji:
2019
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
tubing milling machine
shaft lining repairs
tubing lining
Opis:
The sealing of shaft cast iron tubing within a tubing Inter-rib niche is often needed during overhauls and repairs of a shaft lining. Leakages or scratches and fractures can occur within the area of individual tubing of the shaft lining. The Przedsiębiorstwo Budowy Szybów S.A. developed special method for the sealing in question. Around the sealed area, a closed circumference groove of a depth smaller than the tubing thickness is made in the inner shaft lining. The sealing element is placed in this groove and then tightened with a spatial insert, with a hole for the injection of the sealing medium. A specially designed milling machine is used for groove making in the tubing lining of the mine shaft. The milling machine is composed of: power transmission system, special construction for mounting the milling machine to tubing and advance mechanism. The milling machine is driven by a battery drill-driver, and the whole device is mounted to the tubing with the use of specially designed guides with handles.
Źródło:
Mining – Informatics, Automation and Electrical Engineering; 2019, 57, 3; 27--36
2450-7326
2449-6421
Pojawia się w:
Mining – Informatics, Automation and Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evolution Of The Results Of 1500 Liver Transplantations Performed In The Department Of General, Transplant And Liver Surgery Medical University Of Warsaw
Autorzy:
Krawczyk, Marek
Grąt, Michał
Grąt, Karolina
Wronka, Karolina
Krasnodębski, Maciej
Stypułkowski, Jan
Masior, Łukasz
Hołówko, Wacław
Ligocka, Joanna
Nyckowski, Paweł
Wróblewski, Tadeusz
Paluszkiewicz, Rafał
Patkowski, Waldemar
Zieniewicz, Krzysztof
Pączek, Leszek
Milkiewicz, Piotr
Ołdakowska-Jedynak, Urszula
Najnigier, Bogusław
Dudek, Krzysztof
Remiszewski, Piotr
Grzelak, Ireneusz
Kornasiewicz, Oskar
Kotulski, Marcin
Smoter, Piotr
Grodzicki, Mariusz
Korba, Michał
Kalinowski, Piotr
Skalski, Michał
Zając, Krzysztof
Stankiewicz, Rafał
Przybysz, Marta
Cieślak, Bartosz
Nazarewski, Łukasz
Nowosad, Małgorzata
Kobryń, Konrad
Wasilewicz, Michał
Raszeja-Wyszomirska, Joanna
Piwowarska, Jolanta
Giercuszkiewicz, Dorota
Sańko-Resmer, Joanna
Rejowski, Sławomir
Szydłowska-Jakimiuk, Monika
Górnicka, Barbara
Wróblewska-Ziarkiewicz, Bogna
Mazurkiewicz, Michał
Niewiński, Grzegorz
Pawlak, Jacek
Pacho, Ryszard
Powiązania:
https://bibliotekanauki.pl/articles/1395614.pdf
Data publikacji:
2015-05-01
Wydawca:
Index Copernicus International
Tematy:
liver transplantation
survival
outcomes
donors
center experience
center volume
Opis:
Liver transplantation is a well-established treatment of patients with end-stage liver disease and selected liver tumors. Remarkable progress has been made over the last years concerning nearly all of its aspects. The aim of this study was to evaluate the evolution of long-term outcomes after liver transplantations performed in the Department of General, Transplant and Liver Surgery (Medical University of Warsaw). Material and methods. Data of 1500 liver transplantations performed between 1989 and 2014 were retrospectively analyzed. Transplantations were divided into 3 groups: group 1 including first 500 operations, group 2 including subsequent 500, and group 3 comprising the most recent 500. Five year overall and graft survival were set as outcome measures. Results. Increased number of transplantations performed at the site was associated with increased age of the recipients (p<0.001) and donors (p<0.001), increased rate of male recipients (p<0.001), and increased rate of piggyback operations (p<0.001), and decreased MELD (p<0.001), as well as decreased blood (p=0.006) and plasma (p<0.001) transfusions. Overall survival was 71.6% at 5 years in group 1, 74.5% at 5 years in group 2, and 85% at 2.9 years in group 3 (p=0.008). Improvement of overall survival was particularly observed for primary transplantations (p=0.004). Increased graft survival rates did not reach the level of significance (p=0.136). Conclusions. Long-term outcomes after liver transplantations performed in the Department of General, Transplant and Liver Surgery are comparable to those achieved in the largest transplant centers worldwide and are continuously improving despite increasing recipient age and wider utilization of organs procured from older donors.
Źródło:
Polish Journal of Surgery; 2015, 87, 5; 221-230
0032-373X
2299-2847
Pojawia się w:
Polish Journal of Surgery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
1000 Liver Transplantations at the Department of General, Transplant and Liver Surgery, Medical University of Warsaw - Analysis of Indications and Results
Autorzy:
Krawczyk, Marek
Grąt, Michał
Barski, Krzysztof
Ligocka, Joanna
Antczak, Arkadiusz
Kornasiewicz, Oskar
Skalski, Michał
Patkowski, Waldemar
Nyckowski, Paweł
Zieniewicz, Krzysztof
Grzelak, Ireneusz
Pawlak, Jacek
Alsharabi, Abdulsalam
Wróblewski, Tadeusz
Paluszkiewicz, Rafał
Najnigier, Bogusław
Dudek, Krzysztof
Remiszewski, Piotr
Smoter, Piotr
Grodzicki, Mariusz
Korba, Michał
Kotulski, Marcin
Cieślak, Bartosz
Kalinowski, Piotr
Gierej, Piotr
Frączek, Mariusz
Rdzanek, Łukasz
Stankiewicz, Rafał
Kobryń, Konrad
Nazarewski, Łukasz
Leonowicz, Dorota
Urban-Lechowicz, Magdalena
Skwarek, Anna
Giercuszkiewicz, Dorota
Paczkowska, Agata
Piwowarska, Jolanta
Gelo, Remigiusz
Andruszkiewicz, Paweł
Brudkowska, Anna
Andrzejewska, Renata
Niewiński, Grzegorz
Kilińska, Beata
Zarzycka, Aleksandra
Nowak, Robert
Kosiński, Cezary
Korta, Teresa
Ołdakowska-Jedynak, Urszula
Sańko-Resmer, Joanna
Foroncewicz, Bartosz
Ziółkowski, Jacek
Mucha, Krzysztof
Senatorski, Grzegorz
Pączek, Leszek
Habior, Andrzej
Lechowicz, Robert
Polański, Sławomir
Leowska, Elżbieta
Pacho, Ryszard
Andrzejewska, Małgorzata
Rowiński, Olgierd
Kozieł, Sławomir
Żurakowski, Jerzy
Ziarkiewicz-Wróblewska, Bogna
Górnicka, Barbara
Hevelke, Piotr
Michałowicz, Bogdan
Karwowski, Andrzej
Szczerbań, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/1396689.pdf
Data publikacji:
2012-06-01
Wydawca:
Index Copernicus International
Tematy:
liver transplantation
indications
results
mortality
Opis:
The aim of the study was to analyze indications and results of the first one thousand liver transplantations at Chair and Clinic of General, Transplantation and Liver Surgery, Medical University of Warsaw.Material and methods. Data from 1000 transplantations (944 patients) performed at Chair and Clinic of General, Transplantation and Liver Surgery between 1994 and 2011 were analyzed retrospectively. These included 943 first transplantations and 55 retransplantations and 2 re-retransplantations. Frequency of particular indications for first transplantation and retransplantations was established. Perioperative mortality was defined as death within 30 days after the transplantation. Kaplan-Meier survival analysis was used to estimate 5-year patient and graft survival.Results. The most common indications for first transplantation included: liver failure caused by hepatitis C infection (27.8%) and hepatitis B infection (18%) and alcoholic liver disease (17.7%). Early (< 6 months) and late (> 6 months) retransplantations were dominated by hepatic artery thrombosis (54.3%) and recurrence of the underlying disease (45%). Perioperative mortality rate was 8.9% for first transplantations and 34.5% for retransplantations. Five-year patient and graft survival rate was 74.3% and 71%, respectively, after first transplantations and 54.7% and 52.9%, respectively, after retransplantations.Conclusions. Development of liver transplantation program provided more than 1000 transplantations and excellent long-term results. Liver failure caused by hepatitis C and B infections remains the most common cause of liver transplantation and structure of other indications is consistent with European data.
Źródło:
Polish Journal of Surgery; 2012, 84, 6; 304-312
0032-373X
2299-2847
Pojawia się w:
Polish Journal of Surgery
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies