Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Lee, Y. J." wg kryterium: Autor


Tytuł:
The Integration, Analysis and Visualization of Sensor Data from Dispersed Wireless Sensor Network Systems Using the SWE Framework
Autorzy:
Lee, Y. J.
Trevathan, J.
Atkinson, I.
Read, W.
Powiązania:
https://bibliotekanauki.pl/articles/308227.pdf
Data publikacji:
2015
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
environment data
environmental monitoring
sensor technologies
standardization
web-based visualization
Opis:
Wireless Sensor Networks (WSNs) have been used in numerous applications to remotely gather real-time data on important environmental parameters. There are several projects where WSNs are deployed in different locations and operate independently. Each deployment has its own models, encodings, and services for sensor data, and are integrated with different types of visualization/analysis tools based on individual project requirements. This makes it dicult to reuse these services for other WSN applications. A user/system is impeded by having to learn the models, encodings, and services of each system, and also must integrate/interoperate data from different data sources. Sensor Web Enablement (SWE) provides a set of standards (web service interfaces and data encoding/model specications) to make sensor data publicly available on the web. This paper describes how the SWE framework can be extended to integrate disparate WSN systems and to support standardized access to sensor data. The proposed system also introduces a web-based data visualization and statistical analysis service for data stored in the Sensor Observation Service (SOS) by integrating open source technologies. A performance analysis is presented to show that the additional features have minimal impact on the system. Also some lessons learned through implementing SWE are discussed.
Źródło:
Journal of Telecommunications and Information Technology; 2015, 4; 86-97
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of a Spherical Titanium Powder by Combined Combustion Synthesis and DC Plasma Treatment
Autorzy:
Choi, S. H.
Ali, B.
Hyun, S. K.
Sim, J. J.
Choi, W. J.
Joo, W.
Lim, J. H.
Lee, Y. J.
Kim, T. S.
Park, K. T.
Powiązania:
https://bibliotekanauki.pl/articles/356067.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
combustion synthesis
DC plasma treatment
titanium powder
3D printing process
combustion parameters
Opis:
Combustion synthesis is capable of producing many types of refractory and ceramic materials, as well as metals, with a relatively lower cost and shorter time frame than other solid state synthetic techniques. TiO2 with Mg as reductant were dry mixed and hand compacted into a 60 mm diameter mold and then combusted under an Ar atmosphere. Depending on the reaction parameters (Mg concentration 2 ≤ α ≤ 4), the thermocouples registered temperatures between 1160°C and 1710°C . 3 mol of Mg gave the optimum results with combustion temperature (Tc) and combustion velocity (Uc) values of 1372°C and 0.26 cm/s respectively. Furthermore, this ratio also had the lowest oxygen concentration in this study (0.8 wt%). After combustion, DC plasma treatment was carried out to spheroidize the Ti powder for use in 3D printing. The characterization of the final product was performed using X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, and N/O analysis.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1057-1062
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural Properties and Mechanical Behavior of the 2 Step-Reinforced Al-Si/SiCp Metal Matrix Composite by Titanium-Fiber
Autorzy:
Oak, J.-J.
Lee, Y. C.
Park, Y. H.
Powiązania:
https://bibliotekanauki.pl/articles/356010.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metal matrix composite
sintering
Ti fiber
mechanical properties
diffusion
Opis:
In this study, the newly designed Al-9Si/SiC particles (SiCp) + Ti-fiber (2step-reinforced Al-9Si alloy matrix) metal matrix composites (MMCs) were fabricated by hot-pressing sintering at 560°C. 2step-reinforced Al-based MMCs were characterized by thermal shrinkage, phase transition, microstructure and tensile strength. The addition of Ti-fiber reduced thermal shrinkage was caused by temperature difference in sintering process as well as enhanced assistance for tensile strength and plastic deformation at room temperature. Experimental results reveal that the 2step-reinforcment sintering by ceramic and metal has a significant effect to increase interface bonding in boundary of each component material and the improved mechanical properties were due to the influence of interfacial product by diffusion. Tensile strength and elongation at room temperature by 2step-reinforcement were improved in 19.5% and 26.2% more than those of Al-9Si/SiCp, respectively. Especially, it reveals that diffusion direction may be varied by sintering methods at low temperature in this study.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1089-1097
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis of Single Crystalline Titanium Oxide and Sodium Titanate Nanorods via Salt-Assisted Ultrasonic Spray Pyrolysis
Autorzy:
Hwangbo, Y.
Yoo, J.-H.
Lee, Y.-I.
Powiązania:
https://bibliotekanauki.pl/articles/352337.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
TiO2
nanorods
salt
Ultrasonic Spray Pyrolysis
optical properties
Opis:
The simple and continuous synthesis of single crystalline anatase titanium dioxide and sodium titanate nanorods by a saltassisted ultrasonic spray pyrolysis method is demonstrated. This method does not require expensive precursors, long reaction time, and physical templates or surfactant. In addition, its continuous nature makes it a suitable method for the large-scale preparation. Moreover, the effect of a salt concentration in a starting solution on material properties, including morphology and phase of the synthesized products was systematically investigated. The synthesized nanorods had one-dimensionality, a single crystalline and the average diameter of 12.3 nm with dual phases of titanium dioxide and sodium titanate by FE-SEM, XRD, HR-TEM as well as FFT-converted SAED pattern analysis.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1411-1414
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase Transformation And Mechanical Properties Of Ti-12.1Mo-1Fe Alloy With Nano-Sized Precipitation
Przemiany fazowe i właściwości mechaniczne stopu Ti-12.1Mo-1Fe z nanometrycznymi wydzieleniami
Autorzy:
Lee, D.-G.
Seo, J.
Li, Ch.
Lee, Y.
Powiązania:
https://bibliotekanauki.pl/articles/352551.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
age hardening
Omega phase
Ti-Mo-Fe alloy
precipitation
hartowanie
faza omega
stop Ti-Mo-Fe
wydzielenia
Opis:
Microstructural characterization and aging hardening behaviors of a new designed Ti-12.1Mo-1Fe alloy during solution treatment and aging were investigated in the present study. It is well known that when β-Ti alloys are generally under solution treatment or aging, α phases and ω phases appear or disappear dependent on heat treatment temperature and holding time. It is very necessary to understand the phase transformation phenomenon and to control the microstructure because these phases can control the drastic changes of the mechanical and physical properties of these alloys. According to the calculated [Mo]eq value and the microstructural observation, the β-transus temperature was about 780°. After the solution treatment, this alloy was composed of the β-phase and the microstructure mainly consisted of the equiaxed β grains with the average size of 25 μm. ω phases which were precipitated during aging process, played a more important role to the hardening effect than α phases. The highest hardness value of Ti-12.1Mo-1Fe alloy showed in the condition of the aging temperature of 450°. The hardening due to ω-phase precipitation can lead to a high hardness about 480 Hv but the coarse α-phase result in hardness below 300 Hv.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1393-1396
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure Evolution of Tungsten-Based ODS Alloys Reinforced with the γ(Ni, Fe) Phase by a Secondary Ball Milling Method
Autorzy:
Chen, C.
Zeng, Y.
Lee, J.
Powiązania:
https://bibliotekanauki.pl/articles/1375180.pdf
Data publikacji:
2014-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.20.Ev
81.20.Wk
81.07.Bc
81.05.Ni
Opis:
In the current study, $W-5Ni-2Fe-Y_2O_3$ model alloys were produced using a high-energy planetary ball mill. The presence of the γ(Ni, Fe) phase is favored with respect to material properties in this alloy. Therefore, a secondary ball milling method was introduced to obtain a fine and uniformly distributed γ(Ni, Fe) phase. Phase development of mechanical alloyed powders was investigated by X-ray diffraction. The results show that the formation of the γ(Ni, Fe) phase was found after 18 h of a pre-milling procedure. A further secondary milling method produced a uniform microstructure with grain refinement. TEM results also show changes in the lattice parameters of the tungsten and γ(Ni, Fe) phase associated with the solid solubility limits in the alloy produced by secondary ball milling.
Źródło:
Acta Physica Polonica A; 2014, 126, 4; 907-911
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of Porous Silica Fibers by Electrospinning for Sound Absorbing Materials
Autorzy:
Cho, Y.-S.
Lee, H. J.
Powiązania:
https://bibliotekanauki.pl/articles/353561.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrospinning
porous silica fiber
thermal insulator
sound absorption
Opis:
Macroporous silica fibers having spherical cavities were fabricated by electrospinning using the spinning solution prepared from the mixed dispersion of tetraethylorthosilicate (TEOS) and polystyrene nanospheres as precursor and sacrificial templates, respectively, by injection through metallic nozzle. By applying electric field, the electro-spun fibers obtained by evaporation-driven self-assembly were collected on flat substrate or rotating drum, followed by the removal of the templates by calcination. The sound absorption coefficient of the porous fibers was measured by impedance tube, and the measured value was larger than 0.9 at high frequency region of incident waves. The surface of the resulting fibers was modified using fluorine-containing silane coupling agent to produce superhydrophobic fibrous materials to prevent the infiltration of humidity.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1497-1502
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects Of Process Parameters On Cu Powder Synthesis Yield And Particle Size In A Wet-Chemical Process
Wpływ parametrów procesu na wydajność syntezy proszku Cu i wielkości cząstek w procesie mokrym chemicznym
Autorzy:
Shin, Y. M.
Lee, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/354168.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wet-chemical process
micron-size Cu powder
Synthesis yield
particle size
gibbs free energy difference
proszek Cu
proces chemiczny mokry
wydajność syntezy
rozmiar cząsteczki
różnica energii swobodnej Gibbsa
Opis:
This study presents a simple wet-chemical process to prepare several micron-size Cu powders. Moreover, changes in powder synthesis yield and particle size are examined with different solvents, synthesis temperatures, and amounts of reducing agent during the synthesis. As a reducing agent and capping agent, L-ascorbic acid and polyvinyl pyrrolidone were used, respectively. The yields in distilled water or an ethylene glycol (EG)/distilled water mixture were higher than that in EG alone, and the yield increased with increasing temperature owing to a lower Δ Gred value. Increasing the L-ascorbic acid concentration also increased the yield. The Cu powder synthesized in 3 h at 90°C in distilled water with 272.8 mM of L-ascorbic acid showed the lowest average particle size of 2.52 μm, indicating mechanisms of short burst nucleation and reduced growth via the increased reduction rate of Cu ions. It is estimated that the nucleation step was nearly completed within 10 min in this system. The Cu powders synthesized in an ethylene glycol/distilled water mixture presented an average particle size of 3.76 μm and the highest yield of 87.9%.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1247-1250
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of PVA Polymer Type and Calcination Temperature on Synthesis of Nanocrystalline Yttria Powder by Polymer Solution Route
Autorzy:
Yang, Y.-K.
Lee, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/356024.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
yttria
PVA
nanocrystalline
synthesis
nanowire
Opis:
Nano-sized yttria (Y2O3) powders were synthesized by a polymer solution route using polyvinyl alcohol (PVA) as an organic carrier. The PVA polymer affected the dispersion of yttrium ions in precursor sol. In this study, three kinds of PVA polymer (different molecular weight) were applied for synthesis of yttria powder. The PVA type as well as calcination temperature had a strongly influence on the particle morphology. Single crystal nano wire particles were observed at the temperature of polymer burn out range and the size was dependent on the PVA type. The stable, fully crystallized yttria powder was obtained through the calcination at 800°C for 1 h. The yttria powder prepared with the high weight PVA (MW: 153,000) revealed a particle size of 30 nm with a surface area of 18.8 m2/g.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1473-1476
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Availability analysis of series redundancy models with imperfect switchover and interrupted repairs
Analiza gotowości modeli redundancji kaskadowej uwzględniających niedoskonałe przełączanie oraz przerwane naprawy
Autorzy:
Shim, J.
Ryu, H.
Lee, Y.
Powiązania:
https://bibliotekanauki.pl/articles/302074.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
gotowość
redundancja kaskadowa
niedoskonałe przełączenie
naprawa przerwana
ogólny czas naprawy
availability
series redundancy
imperfect switchover
interrupted repair
general repair time
Opis:
This paper considers N + 1 series redundancy, where N components are active and 1 component is standby in normal state. The active components execute the service, while the standby component is ready to take over the active role if the active components fail. When an active component fails, the standby, if available, automatically takes over system operations. However, the automatic switchover of the standby component to active mode might not be possible due to hardware or software issues. When a component failure or an imperfect switchover occurs, it immediately begins to be repaired. However, the repair process is possible to be interrupted. The most existing literature of redundancy models has focused on Markovian systems with uninterrupted repairs. This paper considers a non-Markovian redundancy model with interrupted repairs, where the repair time, the non-automatic switchover time, and the interrupted time are generally distributed. Using supplementary variable method and integro-differential equations, we obtain the steady-state availability for the redundancy model.
W niniejszym artykule rozważano przypadek redundancji kaskadowej typu N + 1, w której liczba N elementów pozostaje aktywnych, a jeden komponent jest w trybie gotowości w stanie normalnym. Elementy aktywne wykonują usługę, podczas gdy składowa rezerwowa pozostaje w stanie gotowości do przejęcia roli aktywnej w przypadku, gdyby składniki aktywne uległy uszkodzeniu. Gdy element aktywny przestaje działać, element zastępczy, jeśli jest dostępny, automatycznie przejmuje operacje systemowe. Jednak automatyczne przełączenie komponentu zastępczego na tryb aktywny nie zawsze jest możliwe z powodu problemów ze sprzętem lub oprogramowaniem. Jeśli wystąpi awaria komponentu lub niedoskonałe przełączenie, natychmiast rozpoczyna się naprawa. Proces naprawy może jednak zostać przerwany. Większośćistniejącej literatury na temat modeli nadmiarowości koncentruje się na systemach Markowa, w których nie dochodzi do przerwania naprawy. W niniejszym artykule rozważano niemarkowowski model nadmiarowości uwzględniający możliwość przerwania naprawy, w którym czas naprawy, czas nieautomatycznego przełączenia oraz czas przerwany mają rozkład ogólny. Wykorzystując metodę dodatkowej zmiennej oraz równania całkowo-różniczkowe otrzymano gotowość stacjonarną dla omawianego modelu redundancji.
Źródło:
Eksploatacja i Niezawodność; 2017, 19, 4; 640-649
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spontaneous Formation of Titanium Nitride on the Surface of a Ti Rod Induced by Electro-Discharge-Heat-Treatment in an N2 Atmosphere
Autorzy:
Lee, W. H.
Yoon, Y. H.
Kim, Y. H.
Lee, Y. K.
Kim, J. Y.
Chang, S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/352477.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium
surface modification
diffusion
heat treatment
XPS
Opis:
A single pulse of 2.0 to 3.5 kJ of input energy from a 450 mF capacitor was applied to a commercially pure Ti rod in a N2 atmosphere. The surface of the Ti rod transformed from TiO2 into titanium nitride in times as short as 159 msec, providing a bimodal morphology of the cross-section. A much higher value of hardness that was observed at the edge of the cross-section was attributed to nitrogen-induced solid-solution hardening that occurred during the electrical discharge process. The activation energy (Ea) for the diffusion process was estimated to be approximately 86.9 kJ/mol. Results show that the electrical discharge process is a possible potential method for the nitriding of Ti; advantages include a short processing time and control of the nitrided layer without dimensional changes.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1281-1285
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Properties of Copper Doped Neodymium Nickelate Oxide as Cathode Material for Solid Oxide Fuel Cells
Autorzy:
Lee, K. J.
Choe, Y-J.
Hwang, H-J.
Powiązania:
https://bibliotekanauki.pl/articles/351292.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
solid oxide fuel cells
copper
electrical conductivity
excess oxygen
Opis:
Mixed ionic and electronic conducting K2NiF4-type oxide, Nd2Ni1-xCuxO4+δ (x=0~1) powders were synthesized by solid state reaction technique and solid oxide fuel cells consisting of a Nd2Ni1-xCuxO4+δ cathode, a Ni-YSZ anode and ScSZ as an electrolyte were fabricated. The effect of copper substitution for nickel on the electrical and electrochemical properties was examined. Small amount of copper doping (x=0.2) resulted in the increased electrical conductivity and decreased polarization resistance. It appears that this phenomenon was associated with the high mean valence of nickel and copper and the resulting excess oxygen (δ). It was found that power densities of the cell with the Nd2Ni1-xCuxO4+δ (x=0.1 and 0.2) cathode were higher than that of the cell with theNd2NiO4+δ cathode.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2A; 625-628
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Modification of Self-Consolidated Microporous Ti Implant Compacts Fabricated by Electro-Discharge-Sintering in Air
Autorzy:
Jo, Y. J.
Yoon, Y. H.
Kim, Y. H.
Chang, S. Y.
Kim, J. Y.
Lee, Y. K.
Van Tyne, C. J.
Lee, W. H.
Powiązania:
https://bibliotekanauki.pl/articles/356790.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium
implant
porous
sintering
X-ray photoelectron spectroscopy (XPS)
Opis:
A single pulse of 0.75-2.0 kJ/0.7g of atomized spherical Ti powders from 300 mF capacitor was applied to produce a microporous Ti implant compact by electro-discharge-sintering (EDS). A solid core in the middle of the compact surrounded by a microporous layer was found. X-ray photoelectron spectroscopy was employed to study the surface characteristics of the EDS Ti compact and it revealed that Ti, C and O were the main constituents on the surface with a smaller amount of N. The surface was lightly oxidized and was primarily in the form of TiO2 resulting from the air oxidation during EDS processing. The lightly oxidized surface of the EDS compact also exhibited Ti nitrides such as TiN and TiON, which revealed that the reaction between air constituents and the Ti powders even in times as short as 128 msec.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1287-1291
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Self-Consolidation Mechanism of Ti5Si3 Compact Obtained by Electro-Discharge-Sintering Directly from Physically Blended Ti-37.5 At.% Si Powder Mixture
Autorzy:
Chang, S. Y.
Cheon, Y. W.
Yoon, Y. H.
Kim, Y. H.
Kim, J. Y.
Lee, Y. K.
Lee, W. H.
Powiązania:
https://bibliotekanauki.pl/articles/353022.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sintering
mechanical alloying
powder consolidation
intermetallic compounds
titanium silicide
Opis:
Characteristics of electro-discharge-sintering of the Ti-37.5at.% Si powder mixture was investigated as a function of the input energy, capacitance, and discharge time without applying any external pressure. A solid bulk of Ti5Si3 was obtained only after in less than 129 μsec by the EDS process. During a discharge, the heat is generated to liquefy and alloy the particles, and which enhances the pinch pressure can condensate them without allowing a formation of pores. Three step processes for the self-consolidation mechanism during EDS are proposed; (a) a physical breakdown of oxide film on elemental as-received powder particles, (b) alloying and densifying the consolidation of powder particles by the pinch pressure, and (c) diffusion of impurities into the consolidated surface.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1299-1302
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies