Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Koziol, A." wg kryterium: Autor


Tytuł:
The Kolmogorovs microscale eddies in a compound channel
Mikrowiry Kołmogorowa w korycie o złożonym przekroju poprzecznym
Autorzy:
Koziol, A.P.
Powiązania:
https://bibliotekanauki.pl/articles/81595.pdf
Data publikacji:
2012
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Opis:
Investigations of the longitudinal sizes of the smallest eddies (Kolmogorov’s microscale) presented in the paper are based on measurements of instantaneous velocities in a hydraulic laboratory in a compound trapezoidal channel with different roughness conditions (smooth bed, rough bed) and with trees system on the floodplains. Sizes of the smallest eddies varied in the ranges of 0.08 to 0.48 mm. The changes of longitudinal sizes of the floodplain microeddies are not caused by: the increase of floodplain roughness, the presence of trees, but only when the main channel bed is smooth, and they are also not caused by the increase of roughness of the main channel sloping banks. However, the increase of the size of the floodplain microeddies is influenced by trees, when the roughness of the floodplains and the main channel sloping banks are identical. The increase of microeddies size in the main channel is infl uenced by: the increase of the main channel sloping banks roughness, by the presence of trees on the floodplains, but only when the roughness of the floodplains and the main channel sloping banks are identical. Microeddies are larger in the main channel centerline than on the floodplains, and the smallest ones were present in the main channel/floodplain interface. The calculated values of microeddies reached decimal parts of a millimeter, and that is why it is difficult to prove vital changes of their values, caused by bed roughness and floodplain trees influence.
W artykule przedstawiono długości podłużnych mikrowirów (mikroskala Kołmogorowa) w strumieniu w korycie o złożonym przekroju poprzecznym. Długości mikrowirów obliczono na podstawie szybkości dyssypacji energii i lepkości cieczy. Do określenia szybkości dyssypacji wykorzystano analizę funkcji gęstości spektralnej, wyznaczonej na podstawie pomierzonych w laboratorium hydraulicznym chwilowych prędkości w korycie o złożonym przekroju poprzecznym dla dwóch różnych szorstkości powierzchni dna koryta i rozmieszczonych drzew na przyległych terenach zalewowych. Na zmiany podłużnych długości mikrowirów na terenie zalewowym nie wpływa: wzrost chropowatości powierzchni terenów zalewowych, występowanie drzew ale kiedy powierzchnia koryta głównego jest gładka, wzrost chropowatości powierzchni skarp koryta głównego. Natomiast na wzrost długości mikrowirów na terenie zalewowym wpływają drzewa kiedy powierzchnie terenów zalewowych i skarp koryta głównego są identyczne. Na wzrost długości mikrowirów w korycie głównym wpływa: wzrost chropowatości powierzchni skarp koryta głównego, występowanie drzew na terenach zalewowych ale kiedy powierzchnie terenów zalewowych i skarp koryta głównego są identyczne. Mikrowiry są większe w osi symetrii koryta głównego niż na terenach zalewowych, a najmniejsze w płaszczyźnie rozdziału pomiędzy obiema częściami koryta. Obliczone wartości mikrowirów są rzędu dziesiątych części milimetra, więc trudno mówić o istotnych zmianach wartości w wyniku wpływu chropowatość powierzchni dna i obecności drzew na terenach zalewowych.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation; 2012, 44, 2
0208-5771
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Turbulent kinetic energy of water in a compound channel
Turbulentna energia kinetyczna strumienia wody w korycie o złożonym przekroju poprzecznym
Autorzy:
Koziol, A.P.
Powiązania:
https://bibliotekanauki.pl/articles/81867.pdf
Data publikacji:
2011
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation; 2011, 43, 2
0208-5771
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of the quintic equation of the state based model for the calculations of different thermodynamic properties
Autorzy:
Kozioł, A.
Wiśniewski, R.
Powiązania:
https://bibliotekanauki.pl/articles/778661.pdf
Data publikacji:
2008
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
równanie stanu
równowaga para-ciecz
wielomiany Hermita
NBP equation of state
vapour-liquid equilibrium
cubic Hermite polynomials
Opis:
Different thermodynamic properties (the vapour density, the liquid density and the saturation pressure) were calculated by the model based on the Nakamura-Breedveld-Prausnitz equation of state (NBP EOS). Since the original form of the NBP EOS often generates inaccurate results for liquids, it was modified to describe this phase better. The calculations were realized in the subcritical region. So far, the temperature-dependent NBP EOS parameters have been obtained by special correlations. Their constants were fitted to a lot of experimental data. In this paper the equation of state temperature-dependent parameters were obtained by a new method which was based at piecewise cubic Hermite interpolating polynomials (PCHIPs). In the proposed method some experimental data (called the key ones) were used, thus reducing the experimental effort. Seven substances were chosen for the test calculations. Each of them is common in industry. The calculation results were compared with the experimental data. The new method has made an accurate description of vapour-liquid equilibrium for the considered pure substances over a wide temperature range possible.
Źródło:
Polish Journal of Chemical Technology; 2008, 10, 1; 6-10
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Void Shapes and o-Ps Lifetime in Molecular Crystals
Autorzy:
Jasińska, B.
Kozioł, A. E.
Goworek, T.
Powiązania:
https://bibliotekanauki.pl/articles/2008032.pdf
Data publikacji:
1999-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
Opis:
The size and shape of the free volume in molecular crystals was estimated from crystallographic data. The o-Ps lifetime values were calculated from respective models and compared with the experimental data. The best agreement for channel-like voids has been obtained for the value of DR parameter equal 0.19 nm. The threshold value of radius allowing Ps trapping in the void was found to be (0.12-0.13) nm.
Źródło:
Acta Physica Polonica A; 1999, 95, 4; 557-561
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurements of 3D turbulence structure in a compound channel
Autorzy:
Czernuszenko, W.
Kozioł, A.
Rowiński, P. M.
Powiązania:
https://bibliotekanauki.pl/articles/241134.pdf
Data publikacji:
2007
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
open channels
compound channel
turbulence
measurements
Opis:
The paper describes some turbulence measurements carried out in an experimental compound channel with flood plains. The surface of the main channel bed was smooth and made of concrete, whereas the floodplains and sloping banks were covered by cement mortar composed with terrazzo. Instantaneous velocities were measured be means of a three-component acoustic Doppler velocity meter (ADV) manufactured by Sontek Inc. This article presents the results of measurements of primary velocity, the distribution of turbulent intensities, Reynolds stresses, autocorrelation functions, turbulent scales, as well as the energy spectra.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2007, 54, 1; 55-73
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The temperature and moisture distribution of rapeseeds in a fixed bed during microwave-vacuum drying on a semi-technical scale
Autorzy:
Łupińska, A.
Kozioł, A.
Łupiński, M.
Araszkiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/778679.pdf
Data publikacji:
2008
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
suszenie mikrofalowo-próżniowe
złoże stałe
rzepak
microwave-vacuum drying
fixed bed
rapeseeds
Opis:
A research into microwave vacuum drying of rapeseeds in a fixed bed on a semi-technical scale was done. The temperature and moisture distribution for a different value of microwave power and pressure were determined. The economic analysis of the drying processes, description of equipment and measurement methodology were presented, too.
Źródło:
Polish Journal of Chemical Technology; 2008, 10, 1; 31-36
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Turbulent intensity and scales of turbulence after hydraulic jump in rectangular channel
Intensywność turbulencji i skale turbulencji po odskoku hydraulicznym w prostokątnym korycie
Autorzy:
Koziol, A.
Urbanski, J.
Kiczko, A.
Krukowski, M.
Siwicki, P.
Powiązania:
https://bibliotekanauki.pl/articles/81745.pdf
Data publikacji:
2016
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation; 2016, 48, 2
0208-5771
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the relationship between drying rate and internal temperature development during microwave drying of porous materials
Określenie relacji między szybkością suszenia a rozkładem temperatury wewnętrznej podczas suszenia mikrofalowego materiałów porowatych
Autorzy:
Araszkiewicz, M.
Kozioł, A.
Sikorska-Maciejak, J.
Trusek-Hołownia, A.
Powiązania:
https://bibliotekanauki.pl/articles/2073033.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
porous material
drying kinetics
temperature
microwaves
drying
materiał porowaty
kinetyka suszenia
temperatura
mikrofale
suszenie
Opis:
The experimentally determined temperature and moisture removal relationships are discussed. The experiments were carried out for model material (gypsum spheres) dried at 200, 300, 400 and 500 W power level settings of microwaves. To compare microwave drying with convective diying the series of experiments with hot air at 150°C were performed. The temperature and mass readings were taken continuously during microwave drying using fibre optic sensors. A significant irregularity in both temperature and drying rate were revealed in microwave drying at high power levels.
W pracy omówiono wyznaczone na drodze doświadczalnej relacje między temperaturą a ubytkiem masy podczas procesu suszenia mikrofalowego. Eksperymenty zostały przeprowadzone na materiale modelowym (kulkach z gipsu) suszonym przy nastawie mocy mikrofal 200, 300, 400 i 500 W. W celu porównania procesu z wykorzystaniem promieniowania mikrofalowego oraz suszenia konwekcyjnego wykonano serię eksperymentów z gorącym powietrzem o temperaturze 150°C. Podczas suszenia rejestrowano w sposób ciągły zmiany masy (waga elektroniczna) i temperatury (czujniki światłowodowe). Przy wysokich poziomach mocy, zarówno w temperaturze jak i szybkości suszenia, zostały zaobserwowane istotne nieregularności.
Źródło:
Inżynieria i Aparatura Chemiczna; 2014, 5; 334--336
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Properties of a streamwise turbulent flow field in an open two-stage channel
Autorzy:
Rowiński, P. M.
Czernuszenko, W.
Kozioł, A. P.
Kubrak, J.
Powiązania:
https://bibliotekanauki.pl/articles/241402.pdf
Data publikacji:
2002
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Opis:
The results of the experimental studies, aimed at the recognition of the streamwise turbulent structure in a compound channel, are reported in this paper. Three sets of measurements with electromagnetic liquid velocity meter were used: one in a smooth channel, one with the rough overbank channels and the last one with the modelled high vegetation occurring on floodplains. The analyses included vertical distributions of local mean velocities, depth-averaged mean velocities, bed shear stresses, turbulent intensities, higher order velocity moments, autocorrelation and velocity spectra. Relevant turbulent temporal and spatial scales were evaluated. All the properties were investigated with special emphasis placed on the influence of roughness on them.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2002, 49, 2; 37-57
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exposure to ticks and preventive actions in the scope of lyme disease among young people from the northern part of Lublin province (eastern Poland)
Ekspozycja na kleszcze oraz podejmowanie działań w zakresie profilaktyki boreliozy z lyme wśród młodzieży z północnej Lubelszczyzny (wschodnia Polska)
Autorzy:
Pańczuk, A.
Kozioł-Montewka, M.
Powiązania:
https://bibliotekanauki.pl/articles/2052657.pdf
Data publikacji:
2017
Wydawca:
Akademia Bialska Nauk Stosowanych im. Jana Pawła II w Białej Podlaskiej
Tematy:
tick bites
Lyme borreliosis
prophylaxis
pokłucia przez kleszcze
borelioza z Lyme
profilaktyka
Opis:
Background. The ticks are the main vector of pathogens of infectious diseases both for people and animals. At present, tick-borne infections spread in the entire Europe. Lyme disease dominates among diseases spreading through ticks. The aim of the research was to determine the frequency of exposures to ticks of the subjected young people, applied ways of removing the ticks and the frequency of using the selected methods of Lyme disease prevention. Material and methods. The study involved 1150 people from the northern part of Lublin province (eastern Poland) at the age between15-20 years. The research tool applied was authors’ own survey questionnaire. Results. Over half of the surveyed young people (58.9%) stated that they had been bitten by ticks before (mostly people who live in the rural areas). Most frequently, the ticks were removed by wringing with tweezers (24.5%), grasping with fingers and tearing out (21.7%) and with tweezers with a swift, steady movement (21.6%). Over half of the surveyed (57.4%) stated that they do not use repellents against ticks while staying on the green areas, and 33.2% of the surveyed rarely use them. 18.3% of the surveyed do not examine the body after the return from the green areas and 34.8% rarely do it. The surveyed who had been bitten by ticks (especially several times) claimed that they more often use the analysed methods of prevention. Conclusions. Among the examined young people the risk of being bitten by ticks has been revealed and the risk is significantly greater among people who live in the rural areas. The ticks attached to skin were often removed improperly. The frequency of using the prevention against Lyme disease is insufficient. The increase of the range of its usage, as well as the promotion of the right method of removing ticks requires educational activities in the society.
Wprowadzenie. Kleszcze są głównym wektorem patogenów chorób zakaźnych zarówno ludzi, jak i zwierząt, a choroby odkleszczowe rozprzestrzeniają się obecnie w całej Europie. Wśród chorób szerzących się za pośrednictwem kleszczy dominuje borelioza z Lyme. Celem badań było określenie częstości ekspozycji na kleszcze badanej młodzieży, stosowanych sposobów jego usuwania oraz częstości stosowania wybranych metod profilaktyki boreliozy z Lyme. Materiał i metody. Badaniem objęto 1150 osób z północnej części województwa lubelskiego (wschodnia Polska) w wieku 15-20 lat. Zastosowanym narzędziem badawczym był autorski kwestionariusz ankiety. Wyniki. Ponad połowa badanej młodzieży (58,9%) zadeklarowała, iż była w swoim życiu ukłuta przez kleszcza (częściej osoby zamieszkałe na wsi). Najczęściej kleszcze usuwano wykręcając je pęsetą (24,5%), chwytając w palce i wyrywając (21,7%) oraz usuwając pęsetą prostym, energicznym ruchem (21,6%). Ponad połowa badanych (57,4%) zadeklarowała, iż przebywając na terenach zielonych nie stosuje środków odstraszających kleszcze, a 33,2% korzysta z nich rzadko. Nie ogląda ciała po powrocie z terenów zielonych 18,3%, a 34,8% robi to bardzo rzadko. Badani ukłuci w przeszłości przez kleszcza (szczególnie wielokrotnie), deklarowali częstsze stosowanie analizowanych sposobów profilaktyki. Wnioski. Wśród badanej młodzieży wykazano narażenie na pokłucia przez kleszcze, istotnie częściej wśród osób mieszkających na wsi. Wkłute w skórę kleszcze często usuwane były w sposób nieprawidłowy. Częstość stosowania profilaktyki boreliozy z Lyme jest niewystarczająca. Zwiększenie zakresu jej stosowania, jak również promowanie prawidłowego sposobu usuwania kleszczy, wymaga działań edukacyjnych w społeczeństwie.
Źródło:
Health Problems of Civilization; 2017, 11, 1; 45-52
2353-6942
2354-0265
Pojawia się w:
Health Problems of Civilization
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acoustical Analysis of Enclosure as Initial Approach to Vehicle Induced Noise Analysis Comparatevely Using STFT and Wavelets
Autorzy:
Błażejewski, A.
Kozioł, P.
Łuczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/176551.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
modal analysis
short-time Fourier transform
wavelet transform
acoustic signal processing
Opis:
It is assumed in the paper that the signals in the enclosure in a transient period are similar to a noise induced by vehicles, tracks, cars, etc. passing by. The components of such signals usually points out specific dynamic processes running during the observation or measurements. In order to choose the best method of analysis of these phenomena, an acoustic field in a closed space with a sound source inside is created. Acoustic modes of this space influence the sound field. Analytically, the modal analyses describe the above mentioned phenomena. The experimental measurements were conducted in the room that might comprise the closed space with known boundary conditions and the sound source Br¨uel & Kjær Omni-directional type 4292 inside. To record sound signals before the field’s steady state was reached, the microphone type 4349 and the 4-channel frontend 3590 had been used. The obtained signals have been analysed by using two approaches, i.e. Fourier and the wavelet analysis, with the emphasis on their efficiency and the capability to recognise important details of the signal. The results obtained for the enclosure might lead to the formulation of a methodology for an extended investigation of a rail track or vehicles dynamics.
Źródło:
Archives of Acoustics; 2014, 39, 3; 385-394
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modernisation of the technological line for the production of moisture resistant cable laminates
Modernizacja linii technologicznej do wytwarzania kablowych zapór przeciwwilgociowych
Autorzy:
Kozioł, S.
Zbrowski, A.
Wiejak, J.
Powiązania:
https://bibliotekanauki.pl/articles/257954.pdf
Data publikacji:
2010
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
kablowa zapora przeciwwilgociowa
proszek superabsorpcyjny
nanoszenie proszków
natrysk środka wiążącego
moisture resistant cable laminate
super absorbent powders
powder spread
binding agent spraying
Opis:
The article presents the technology of the production of moisture resistant electrical and telecommunications cable laminates and the means of the modernisation of the technological line for their manufacture. Two innovative devices for the spread of superabsorbents and binding agents over the non-woven base developed and implemented within the framework of the modernisation. The technical solution applied in the devices enabled improvement in the quality of manufactured goods and improvement in the efficiency and profitability of the production process. The results of the verification tests of the developed devices are shown.
W artykule omówiono technologię wytwarzania zapór przeciwwilgociowych do kabli energetycznych i telekomunikacyjnych oraz sposób modernizacji linii technologicznej do ich wytwarzania. Opisano dwa innowacyjne urządzenia do nanoszenia superabsorbenta i środka wiążącego na podłoże włókninowe, opracowane i wdrożone w ramach modernizacji. Rozwiązania techniczne zastosowane w urządzeniach pozwoliły na poprawę jakości wytwarzanych wyrobów oraz wydajności i opłacalności produkcji. Przestawiono wyniki badań weryfikacyjnych opracowanych urządzeń. Rozwiązania wdrożono na linii technologicznej do wytwarzania kablowych zapór przeciwwilgociowych w Zakładzie Doświadczalnym w Instytucie Włókiennictwa w Łodzi.
Źródło:
Problemy Eksploatacji; 2010, 4; 115-125
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System for the identification of operational characteristics of air cushions
System do wyznaczania charakterystyk eksploatacyjnych pneumatycznych poduszek podnoszących
Autorzy:
Samborski, T.
Kozioł, S.
Zbrowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/258053.pdf
Data publikacji:
2010
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
pneumatyczna poduszka podnosząca
ratownictwo techniczne
certyfikacja
air cushions
technical rescue
certification
Opis:
The article presents the system for the identification of maintenance characteristics of air cushions. The parameters of the system allow the research and certification works to be conducted according to binding rules. The development of the system beginning from the identification of the needs, through research works up to the verification and implementation of the solution has been presented in the paper.
Artykuł prezentuje system do wyznaczania charakterystyk eksploatacyjnych pneumatycznych poduszek podnoszących. Parametry systemu umożliwiają prowadzenie prac badawczych oraz badań certyfikacyjnych zgodnie z obowiązującymi przepisami. Przedstawiono strukturę i parametry systemu. Na podstawie przepowadzonej symulacji modelu wirtualnego przedstawiono rezultaty numerycznych obliczeń wytrzymałościowych. Zamieszczono wyniki badań weryfikacyjnych przeprowadzonych na obiektach rzeczywistych. W artykule omówiono proces rozwoju systemu począwszy od identyfikacji potrzeb, poprzez prace badawcze aż do weryfikacji rozwiązania i wdrożenia. System wdrożono w Centrum Naukowo Badawczym Ochrony Przeciwpożarowej.
Źródło:
Problemy Eksploatacji; 2010, 3; 95-104
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Test stand intended for the study on the leak tightness of air-handling units with built-in heat recuperators
Stanowisko do badania szczelności central wentylacyjnych z odzyskiem ciepła
Autorzy:
Kozioł, S.
Matras, E.
Zbrowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/964068.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
ventilation
tightness
heat recuperators
outside air leakage
inside air leakage
wentylacja
szczelność
wymiennik ciepła
przeciek zewnętrzny
przeciek wewnętrzny
Opis:
The article presents a prototype device and methods for the testing of the tightness of air handling units with built-in heat recuperators. The tightness test is a preliminary test that helps to verify whether the device can in fact be used in a mechanical ventilation installation. The external and internal air leakage was tested with the use of a standard gas meter equipped with an electronic impulse transmitter. The test stand cooperates with a built-in control system developed by the authors to determine thermal efficiency and humidity recovery in recuperators constituting elements of the developed air-handling unit.
W artykule przedstawiono prototypowe urządzenie i metodykę badania szczelności zewnętrznej i wewnętrznej central wentylacyjnych z odzyskiem ciepła. Badanie szczelności jest wstępnym testem sprawdząjacym przydatność urządzenia do zastosowania w instalacji wentylacji mechanicznej. Do dokładnego pomiaru przecieku wewnętrznego lub zewnętrznego centrali zastosowano legalizowany gazomierz wyposażony w elektroniczny nadajnik impulsów. Stanowisko wspołpracuje ze zbudowanym przez autorów układem sterowania instalacji do wyznaczania sprawności temperaturowej i odzysku wilgoci w rekuperatorach wchodzących w skład centrali.
Źródło:
Problemy Eksploatacji; 2013, 3; 113-122
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies