Wszystkie pola: cleaning - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The Parameters of Cleaning a CIP System Affected Energy Consumption and Cleaning Efficiency of the Plate Heat Exchanger
Autorzy:: Piepiórka-Stepuk, J.
Diakun, J.
Jakubowski, M.
Powiązania:: https://bibliotekanauki.pl/articles/185066.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: cleaning
CIP system
energy consumption
cleaning parameters
cleanliness
cleaning efficiency
czyszczenie
System CIP
zużycie energii
parametry czyszczenia
czystość
Opis:: This paper presents a study on the effect of cleaning factors on the energy consumption of the cleaning process in a CIP system, and the correlation between single components of electricity necessary to perform this process and the cleanliness degree obtained. Studies were carried out in a laboratory cleaning station, wherein a plate heat exchanger contaminated with hot milk was included. The research program was developed according to a 5-level statistical plan. Based on the results, obtained with Experiment Planner 1.0, a regression function of energy requirement considering variables such as: cleaning time, temperature and flow rate of the cleaning liquid via the cleaned exchanger has been developed. Describing this relationship, linear and quadratic functions with double interactions were used. Significance level for the analysis was established at α = 0.05. Correlation analysis between components of the electricity necessary to perform the cleaning process (pump drive and heating of the cleaning agent) and the resulting degree of cleaning of heat exchanger plates was performed.
Źródło:: Chemical and Process Engineering; 2017, 38, 1; 111-120
0208-6425
2300-1925
Pojawia się w:: Chemical and Process Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Ablative laser cleaning of materials
Autorzy:: Napadłek, W.
Powiązania:: https://bibliotekanauki.pl/articles/244183.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: laser ablation
cleaning of materials
surface layer
Opis:: On the base of literature data as well as authors works a review of the state-of-the-art in ablative laser cleaning of surface layers of various constructional materials with encrustation produced in physical and technological processes is presented in the paper. The process and mechanisms occurring in the ablative laser cleaning are described. Three types of the most frequently used lasers offer characteristic advantages understood as average power, pulse operation, wavelength, optical feedback with materiał processed, and fiber delivery. The process of surface layer cleaning of materials and machine elements can be carried out in various -ways. In general, when using pulse laser radiation, five different mechanisms of removal of particles, encrustations, or coatings can be applied. So, the process of removal can be performed via following physical processes: surface vibrations, particles oscillations, thermal expansion of particles (or encrustation), generation of so called detonation wave over surface being cleaned, and laser ablation. Lasers are especially useful for removal of layers from many types of substrates like wood, metals, plastics, composites, stones, ceramics, leather, and others. The important advantage of laser cleaning and surface modification is the capability of processing automation which is related to process repeatability, ease of parameters controlling, possibility of strengthening in zones difficult to access, high precision of interaction and high efficiency as well.
Źródło:: Journal of KONES; 2009, 16, 1; 357-366
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Ablative laser cleaning of lacquer coating
Autorzy:: Napadłek, W.
Kalman, I.
Powiązania:: https://bibliotekanauki.pl/articles/971093.pdf
Data publikacji:: 2012
Wydawca:: Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:: laser ablation cleaning
lacquer coats
Opis:: The paper presents the selected results of tests on ablational laser removal of polymer lacquer coating with metallic filler (aluminium plates). The fibre laser with the Galvo head of the following parameters: the radiation wavelength λ = 1064nm, the exposition time of the laser impulse τ = 25ns, and the repetition frequency 30-500kHz was used. By changing the power thickness, repetition frequency, and scanning speed various effects of varnish, coating removal were obtained. The melting of the colourless lacquer coat was observed when small power thickness was applied. Multiple scanning with the laser beam of higher power thickness resulted in sequential removal of several to tens of micrometers of the lacquer coating. This technology brings very good perspectives for the renovation of lacquer coating systems in present vehicles (bodies, frames).
Źródło:: Journal of Machine Engineering; 2012, 12, 2; 77-85
1895-7595
2391-8071
Pojawia się w:: Journal of Machine Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Performances in tank cleaning
Autorzy:: Panaitescu, V. A.
Panaitescu, M.
Panaitescu, F. V.
Martes, L.
Powiązania:: https://bibliotekanauki.pl/articles/116037.pdf
Data publikacji:: 2018
Wydawca:: Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:: tank cleaning
ship operation
chemicals
impact cleaning
rinsing
ultra-violet spectroscopy
MARPOL
Permanganate Time Test (PTT)
Opis:: There are several operations which must do to maximize the performance of tank cleaning. The new advanced technologies in tank cleaning have raised the standards in marine areas. There are many ways to realise optimal cleaning efficiency for different tanks. The evaluation of tank cleaning options means to start with audit of operations: how many tanks require cleaning, are there obstructions in tanks (e.g. agitators, mixers), what residue needs to be removed, are cleaning agents required or is water sufficient, what methods can used for tank cleaning. After these steps, must be verify the results and ensure that the best cleaning values can be achieved in terms of accuracy and reliability. Technology advancements have made it easier to remove stubborn residues, shorten cleaning cycle times and achieve higher levels of automation. In this paper are presented the performances in tank cleaning in accordance with legislation in force. If tank cleaning technologies are effective, then operating costs are minimal.
Źródło:: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2018, 12, 1; 159-163
2083-6473
2083-6481
Pojawia się w:: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: New possibilities of environmentaly friendly cleaning method by laser technology
Autorzy:: Sobotová, L.
Badida, M.
Powiązania:: https://bibliotekanauki.pl/articles/103239.pdf
Data publikacji:: 2016
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: corrosion
laser cleaning technology
material
environment
Opis:: Still deteriorating environment, requirements for reducing of production waste, requirements for the protection of the working environment, the formation of new technologies and materials, as well as the economic conditions are forcing manufacturers to use the environmentally friendly technology. The contribution deals with new progressive possibilities of cleaning products, raw materials and with the establishment of a minimum production waste. The research focuses on the possibilities of laser cleaning of materials, under defined technological conditions. In the contribution is presented the results of realized experiments in Technical University of Kosice, together created in cooperation with Trumpf Slovakia, s.r.o.
Źródło:: Advances in Science and Technology. Research Journal; 2016, 10, 32; 224-229
2299-8624
Pojawia się w:: Advances in Science and Technology. Research Journal
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: The chemical cleaning of ceramic membrane used in UF
Autorzy:: Tomaszewska, M.
Białończyk, L.
Powiązania:: https://bibliotekanauki.pl/articles/779109.pdf
Data publikacji:: 2012
Wydawca:: Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:: ultrafiltration
ceramic membrane
whey; broth
fouling
chemical cleaning
Opis:: Ultrafiltration (UF) is one of the membrane processes which is mostly used in the dairy industry for the separation and concentration of whey components or fermentation broth. Fouling of UF membranes in the food industry is primarily due to a deposition of microorganisms, proteins, fats and minerals on the membrane surface. Thus, cleaning of the membranes is an essential step of UF separation. The results from investigations of chemical cleaning of a ceramic UF membrane fouled by precipitation of whey components and yeast contained in the fermentation broth are presented. The effect of cleaning procedure on the degree of permeability restoration by the fouled membrane was studied. The results demonstrated that a combination of sodium hydroxide, phosphoric acid and sodium hypochlorite as a disinfectant could be successfully used to achieve an optimum recovery of the membrane properties.
Źródło:: Polish Journal of Chemical Technology; 2012, 14, 3; 105-109
1509-8117
1899-4741
Pojawia się w:: Polish Journal of Chemical Technology
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Rotary Head Kinematics During Cleaning of Flat Surfaces
Autorzy:: Chomka, G.
Chudy, J.
Powiązania:: https://bibliotekanauki.pl/articles/386999.pdf
Data publikacji:: 2012
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:: głowica obrotowa
oczyszczanie
rotary head
prolate cycloid
cleaning
postprocessing traces
Opis:: The present article covers the problem of a mathematical description of the trajectory of those postprocessing traces that occur in the process of hydro jet cleaning of flat surfaces with the use of a rotary head. An analysis was conducted of postprocessing traces taking into consideration the provision of their uniform distribution. The determination of the conditions of an effective cleaning will allow such a selection of the working parameters of the head when a surface is obtained of a high quality, i.e. with a uniform degree of the removal of impurities.
Źródło:: Acta Mechanica et Automatica; 2012, 6, 3; 19-26
1898-4088
2300-5319
Pojawia się w:: Acta Mechanica et Automatica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Nurse attıtudes towards cleanıng blood pressure cuffs: profile in Turkey
Autorzy:: Sahan, Seda
Günay Ismailoğlu, Elif
Powiązania:: https://bibliotekanauki.pl/articles/1918972.pdf
Data publikacji:: 2021-06-14
Wydawca:: Uniwersytet Medyczny w Białymstoku
Tematy:: Blood pressure cuff
nurse
cleaning cuffs
disinfection
Opis:: Purpose: Presenting how blood pressure cuffs are cleaned by nurses and which disinfectant agents are used in cleaning the cuffs will allow conducting detailed studies that can establish a standard procedure for cuff cleaning. However, there is no study on the views of nurses and application procedures regarding the cleaning of blood pressure cuffs. Therefore, this study aimed to determine nurses' attitudes regarding cleaning the blood pressure cuffs in Turkey. Materials and methods: The study sample was composed of nurses working in Turkey who were invited and agreed to participate in the study from February to March 2021. This study was completed with 286 nurses with 90% power. Research data were collected online via Google Forms. Results: In the study, 64.3% of the nurses stated that the cleaning staff should be responsible for cleaning the cuffs. 29.4% reported that the cuffs were cleaned several times a month, and 20.3% stated that cuffs were cleaned only when they were infected. 52.1% reported that alcohol was used for cleaning the cuffs. Conclusions: Nurses agreed on the necessity of cuff cleaning and that the cuffs could be a source of infection when they were not cleaned. Since nurses have an important role in infection control, they should play an active role in cuff cleaning and receive training on this issue.
Źródło:: Progress in Health Sciences; 2021, 11(1); 83-87
2083-1617
Pojawia się w:: Progress in Health Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: GeoWebCln: An intensive cleaning architecture for geospatial metadata
Autorzy:: Kumari Sheoran, Savita
Parmar, Vinti
Powiązania:: https://bibliotekanauki.pl/articles/2054577.pdf
Data publikacji:: 2022-03-31
Wydawca:: Uniwersytet im. Adama Mickiewicza w Poznaniu
Tematy:: spatial data
spatial metadata
data cleaning
spatial database
GIS
Opis:: Developments in big data technology, wireless networks, Geographic information system (GIS) technology, and internet growth has increased the volume of data at an exponential rate. Internet users are generating data with every single click. Geospatial metadata is widely used for urban planning, map making, spatial data analysis, and so on. Scientific databases use metadata for computations and query processing. Cleaning of data is required for improving the quality of geospatial metadata for scientific computations and spatial data analysis. In this paper, we have designed a data cleaning tool named as GeoWebCln to remove useless data from geospatial metadata in a user-friendly environment using the Python console of QGIS Software.
Źródło:: Quaestiones Geographicae; 2022, 41, 1; 51-62
0137-477X
2081-6383
Pojawia się w:: Quaestiones Geographicae
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Semiconductor cleaning technology for next generation material systems
Autorzy:: Ruzyllo, J.
Powiązania:: https://bibliotekanauki.pl/articles/308761.pdf
Data publikacji:: 2007
Wydawca:: Instytut Łączności - Państwowy Instytut Badawczy
Tematy:: III-V compounds
FinFET
IC manufacturing
MEMS
MOS gate stack
semiconductor cleaning
Opis:: This paper gives a brief overview of the challenges wafer cleaning technology is facing in the light of advanced silicon technology moving in the direction of non-planar device structures and the need for modified cleans for semiconductors other than silicon. In the former case, the key issue is related to cleaning and conditioning of vertical surfaces in next generation CMOS gate structure as well as deep 3D geometries in MEMS devices. In the latter, an accelerated pace at which semiconductors other than silicon are being introduced into the mainstream manufacturing calls for the development of material specific wafer cleaning technologies. Examples of the problems related to each challenge are considered.
Źródło:: Journal of Telecommunications and Information Technology; 2007, 2; 44-48
1509-4553
1899-8852
Pojawia się w:: Journal of Telecommunications and Information Technology
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: The problem of highly effective cleaning
Autorzy:: Batluk, V.
Romanzov, E.
Paranyak, N.
Powiązania:: https://bibliotekanauki.pl/articles/410720.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:: pył
oczyszczanie powietrza
zanieczyszczenia
cyklony
dust
catching
air cleaning
pollution
centrifugal
cyclone
Opis:: The article deals with the problem of providing high performance apparatuses for cleaning air from dust in various branches of industry in order to reduce hazardous emissions to the level conforming to sanitary-hygienic norms. The article describes new trends in the development of dust catching apparatuses based on the use of centrifugal-inertial forces, permitting to significantly improve the effectiveness of dust catching.
Źródło:: ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2012, 1, 1; 9-12
2084-5715
Pojawia się w:: ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Three-dimensional fuzzy control of ultrasonic cleaning
Autorzy:: Morkun, Volodymyr
Kravchenko, Olha
Powiązania:: https://bibliotekanauki.pl/articles/2115809.pdf
Data publikacji:: 2021
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:: ultrasonic cleaning
3D fuzzy interval type 2 logic
modeling
spatially distributed systems
Opis:: Consideration of ultrasonic cleaning as a process with distributed parameters enables reduction of power consumption. This approach is based on establishment of control over the process depending on fixed values of ultrasonic responses in set points. The initial intensity of radiators is determined using a three-dimensional (3D) interval type-2 fuzzy logic controller essentially created for processes with distributed parameters, as well as complex expert evaluation of the input data. The interval membership functions for the input and output data consider the space heterogeneity of ultrasonic cleaning. A rule base is formed, which is 2D and not dependent upon the number of input and output parameters. A model illustrating ultrasonic cleaning with a 3D interval type-2 fuzzy logic controller is designed. Comparative analysis of the output parameters of the proposed model and the traditional method indicates an increase in the energy efficiency by 41.17% due to application of only those ultrasonic radiators that are located next to the contamination.
Źródło:: Acta Mechanica et Automatica; 2021, 15, 3; 169--176
1898-4088
2300-5319
Pojawia się w:: Acta Mechanica et Automatica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Mathematical model of dust cleaning process in centrifugal-inertial dust collector
Autorzy:: Batluk, V.
Paranyak, N.
Makarchuk, V
Powiązania:: https://bibliotekanauki.pl/articles/410648.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:: dust collecting
air cleaning
pollution
centrifugal
cyclone
Opis:: The article is devoted to the problem of providing air cleaning from dust in various industries, using highly efficient apparatus, with the aim of bringing the volume of harmful emissions to the sanitary standards. The article presents new directions in creating of dust cleaning apparatus, based on the usage of centrifugal, inertial forces, by which the efficiency of dust collection could be significantly increased.
Źródło:: ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2013, 2, 2; 9-16
2084-5715
Pojawia się w:: ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Are safety data sheets for cleaning products used in Norway a factor contributing to the risk of workers exposure to chemicals?
Autorzy:: Suleiman, Abdulqadir M.
Svendsen, Kristin V.
Powiązania:: https://bibliotekanauki.pl/articles/2178899.pdf
Data publikacji:: 2014-10-01
Wydawca:: Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:: cleaning workers
safety data sheets
cleaning products
health information
constituent components
Safety measures
Opis:: Objectives: Cleaning products are considered less hazardous than those used in other sectors. Suppliers and distributors are less conscientious when it comes to informing users on health risks. The aim of the study was to elaborate on the usefulness and clarity of information in the safety data sheets (SDS) for cleaning products, and considering if the use of these SDSs can be seen as a risk factor towards occupational exposure to hazardous chemicals in the sector. Material and Methods: Safety data sheets were selected based on the risk level of the product assigned in an industrial sector scheme. 320 SDSs for cleaning products were reviewed. Constituent components found in the products over a given threshold were listed and available information thereof used to assess the perceived non-hazard consideration of the chemicals. Results: The contents of the SDSs was generic and mostly incomplete. Safety measures and health information lacked sufficient specificity despite varying compositions and concentrations of components. There is generally incompatibility between mentioned sections on the suggested non-hazardous nature of the products and health effects. Not all substances used in these products have harmonized classifications, which makes them open to various classification of the products and the suggested safety measures. This results in different companies classifying similar products differently. Risk management measures and suggested personal protective equipment (PPEs) are given haphazardly. Physical properties relevant to risk assessment are not included. Conclusions: The safety data sheets are ambiguous, and they lack relevant and important information. Inadequate information and risk assessment concerning the products can lead to workers being exposed to hazardous chemicals. Underestimation of the hazard contribution of the components of the products and the insufficient, non-objective mention of appropriate control and protective measures are the major contributing elements. There is a need to test the products in order to establish health effects and product specific safety measures.
Źródło:: International Journal of Occupational Medicine and Environmental Health; 2014, 27, 5; 840-853
1232-1087
1896-494X
Pojawia się w:: International Journal of Occupational Medicine and Environmental Health
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Adsorption Air Cleaning From Ozone
Autorzy:: Baltrenas, P.
Paliulis, D.
Vasarevicius, S.
Simaitis, R.
Powiązania:: https://bibliotekanauki.pl/articles/90685.pdf
Data publikacji:: 2003
Wydawca:: Centralny Instytut Ochrony Pracy
Tematy:: adsorption
ozone
air cleaning
empirical formulas
ozon
zanieczyszczenie atmosfery
adsorpcja
filtrowanie powietrza
Opis:: Not much has been written about air cleaning from ozone. The aim of this paper was to demonstrate the possibility of adsorption air cleaning from ozone. The second aim was to investigate the dependence of the efficiency of ozone removal from the air on the height of the adsorber layer and on concentrations of ozone, and to obtain empirical formulas for calculating the efficiency of ozone treatment. Equipment for air cleaning from ozone and nitrogen and sulphur dioxides is suggested.
Źródło:: International Journal of Occupational Safety and Ergonomics; 2003, 9, 3; 301-311
1080-3548
Pojawia się w:: International Journal of Occupational Safety and Ergonomics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "cleaning" wg kryterium: Wszystkie pola

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język