Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Król, A." wg kryterium: Wszystkie pola


Tytuł:
The design of the public transport lines with the use of the fast genetic algorithm
Projektowanie przebiegu linii komunikacji publicznej za pomocą szybkiego algorytmu genetycznego
Autorzy:
Król, A.
Powiązania:
https://bibliotekanauki.pl/articles/361803.pdf
Data publikacji:
2015
Wydawca:
Wyższa Szkoła Logistyki
Tematy:
genetic algorithm
public transport
optimization
bus lines
algorytm genetyczny
transport publiczny
optymalizacja
linie autobusowe
Opis:
Background: The growing role of public transport and the pressure of economic criteria requires the new optimization tools for process of public transport planning. These problems are computationally very complex, thus it is preferable to use various approximate methods, leading to a good solution within an acceptable time. Methods: One of such method is the genetic algorithm mimicking the processes of evolution and natural selection in the nature. In this paper, the different variants of the public transport lines layout are subjected to the artificial selection. The essence of the proposed approach is a simplified method of calculating the value of the fit function for a single individual, which brings relatively short computation time even for large jobs. Results: It was shown that despite the introduced simplifications the quality of the results is not worsened. Using the data obtained from KZK GOP (Communications Municipal Association of Upper Silesian Industrial Region) the described algorithm was used to optimize the layout of the network of bus lines located within the borders of Katowice. Conclusion: The proposed algorithm was applied to a real, very complex network of public transportation and a possibility of a significant improvement of its efficiency was indicated. The obtained results give hope that the presented model, after some improvements can be the basis of the scientific method, and in a consequence of a further development to find practical application.
Wstęp: Rosnąca rola komunikacji publicznej przy jednoczesnym nacisku kryteriów ekonomicznych wymaga zastosowania nowych narzędzi optymalizacyjnych do procesu planowania transportu publicznego. Problemy te są bardzo złożone obliczeniowo, więc korzystne jest zastosowanie różnych metod przybliżonych, prowadzących do uzyskania dobrych rozwiązań w akceptowalnym czasie. Metody: Jedną z takich metod jest algorytm genetyczny, naśladujący procesy ewolucji i doboru naturalnego w przyrodzie. W prezentowanej pracy sztucznemu doborowi podlegają różne warianty układu linii komunikacji publicznej. Istotą proponowanego podejścia jest uproszczony sposób obliczania wartości funkcji dostosowania pojedynczego osobnika, co przynosi stosunkowo krótki czas obliczeń nawet dla dużych zadań. Wyniki: Pokazano, że mimo wprowadzonych uproszczeń, jakość uzyskanych rezultatów nie ulega pogorszeniu. Korzystając z danych uzyskanych od KZK GOP (Komunikacyjny Związek Komunal ny Górnośląskiego Okręgu Przemysłowego) zastosowano opisywany algorytm do optymalizacji układu części sieci linii autobusowych znajdujących się w obrębie miasta Katowice. Wnioski: Zaproponowany algorytm zastosowano do rzeczywistej, bardzo złożonej sieci komunikacji publicznej uzyskując znaczącą poprawę jej efektywności. Otrzymane rezultaty dają nadzieję, że prezentowany model po udoskonaleniu i może być podstawą naukowej metody, a w konsekwencji dalszego rozwoju znaleźć praktyczne zastosowanie.
Źródło:
LogForum; 2015, 11, 3; 275-282
1734-459X
Pojawia się w:
LogForum
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of an optimal transportation network structure stability
Badanie stabilności optymalnej struktury sieci transportowej
Autorzy:
Król, A.
Powiązania:
https://bibliotekanauki.pl/articles/197761.pdf
Data publikacji:
2012
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
transport
sieć transportowa
model sieci transportowej
transportation network
transportation network model
Opis:
There are various methods for the searching of the optimal transportation network structure for specified transportation needs. Apart from the principle, each method requires the construction of the network model with some simplifying assumptions and approximations, what leads to discrepancies with reality. Even larger uncertainties are caused by using of the data predicted for the transportation needs in the future. Obtaining of any single transportation network structure is therefore not yet a solution. Its behavior additionally should be examined for the changed data to ensure that it remains optimal both now and in the future covered by the forecast.
Istnieją różne metody pozwalające na znalezienie struktury sieci transportowej optymalnej dla zadanych potrzeb transportowych. Niezależnie od zasady działania każda metoda wymaga budowy modelu sieci przy przyjęciu pewnych założeń upraszczających oraz dokonania przybliżeń, co prowadzi do rozbieżności z rzeczywistością. Jeszcze większe niepewności są skutkiem użycia danych prognozowanych dla potrzeb transportowych w przyszłości. Uzyskanie jakiejkolwiek pojedynczej struktury sieci transportowej nie jest zatem rozwiązaniem problemu. Należy dodatkowo zbadać jej zachowanie dla zmienionych danych, aby upewnić się, że pozostanie optymalną zarówno obecnie, jak i w objętej prognozą przyszłości.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2012, 74; 49-58
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Leaching of heavy metals from monolithic waste
Autorzy:
Mizerna, K.
Król, A.
Powiązania:
https://bibliotekanauki.pl/articles/208246.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
heavy metals
leaching heavy metals
metale ciężkie
wymywanie metali ciężkich
Opis:
Leaching of heavy metals (Zn, Pb, Cu, Ni and Cr) from hazardous waste originating from steel works (slag) has been investigated. Contaminant leaching behavior from monolithic waste materials in the function of time was examined. There was established the cumulative leaching of elements per surface area of waste material and the impact of the duration of the leachant contact with the waste on the leachability. The types of processes accompanying the release of heavy metals were determined as well. Surface wash-off and dissolution were dominant processes during the leaching of the analyzed elements. Chromium was the only element whose release from the sample was controlled by diffusion when subjected to leaching in a liquid of pH 7. Due to the low levels of heavy metal leaching in relation to their concentrations in the samples, it seems that longer duration of the tank test can contribute to the release of additional amounts of the heavy metals.
Źródło:
Environment Protection Engineering; 2018, 44, 4; 143-158
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using a genetic algorithm for the design of an optimal transport network
Zastosowanie algorytmu genetycznego do optymalizacji sieci transportowej
Autorzy:
Król, A.
Pamuła, T.
Powiązania:
https://bibliotekanauki.pl/articles/375204.pdf
Data publikacji:
2009
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
algorytm genetyczny
sieć transportowa
optymalizacja
transport network
genetic algorithms
optimisation
Opis:
A transportation network serves the transport requirements of moving people and goods with different destination goals and relocation directions. The current network structure is usually a result of historically long adaptation process and the probability that it is not optimal is very high. Additionally it can be observed a growth of transportation needs. In these circumstances when a modernisation or expansion is required a number of competing designs must be evaluated. Combined total building expenses and maintenance costs are accepted among the evaluation criteria. Such a restriction does not guarantee an optimal solution as only a small fraction of the solution space is analysed. The input data for the optimisation problem cannot be entered in analytical form so it is natural to propose a genetic algorithm for performing the task.
Siec transportowa służy zaspokojeniu komunikacyjnych potrzeb ludności ukierunkowanych na różne punkty docelowe i różne kierunki. Ponieważ aktualna struktura sieci jest skutkiem długotrwałych procesów w przeszłosci prawdopodobienstwo, że nie jest ona optymalna dla obecnych potrzeb jest duże. Dodatkowo, przewiduje sie wzrost tych potrzeb. W takiej sytuacji, gdy wymagana jest modernizacja lub rozbudowa sieci transportowej z reguły rozpatruje sie kilka konkurencyjnych projektów i nastepnie wybiera jeden z nich. Jako kryterium rozpatruje sie łaczne koszty rozbudowy i koszty użytkowania sieci transportowej. Taka procedura nie gwarantuje znalezienia rozwiązania optymalnego, gdyż nawet niewielki ułamek przestrzeni wszystkich możliwości nie jest poddany analizie. Ze wzgledu na to, że dane wejściowe dla tego problemu nie mogą być zadane postaci analitycznej, naturalne jest zaproponowanie algorytmu genetycznego, jako narzędzia optymalizacyjnego
Źródło:
Transport Problems; 2009, 4, 4; 107-113
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Localization of vehicle license plates in images using fuzzy logic and morphological operations
Lokalizacja tablic rejestracyjnych pojazdów z użyciem logiki rozmytej i operacji morfologiczych na obrazach cyfrowych
Autorzy:
Król, A.
Pamuła, T.
Powiązania:
https://bibliotekanauki.pl/articles/374218.pdf
Data publikacji:
2009
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
logika rozmyta
tablica rejestracyjna
wideorejestrator
obraz cyfrowy
fuzzy logic
licence plate
colour camera
digital image
Opis:
The paper presents a method of localization of licence plates in a traffic scene image. It is assumed that the input data comes from a colour camera and the results are grey scale images of isolated license plates. The method was implemented and tested. Test results confirm that it can be incorporated in a system for traffic monitoring or parking supervision.
W artykule przedstawiono metodę lokalizacji tablicy rejestracyjnej z obrazu uzyskanego z wideorejestratora. Przyjęto założenie, że danymi wejściowymi, analizowanymi przez algorytm, będą kolorowe obrazy, a efektem obrazy w odcieniach szarości z wyodrębnioną tablicą rejestracyjną. Metodę zaimplementowano i przetestowano. W metodzie wykorzystano elementy logiki rozmytej. Algorytm ten ma stanowić część systemu automatycznego rozpoznawania tablic rejestracyjnych.
Źródło:
Transport Problems; 2009, 4, 1; 95-101
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Clutch-brake unit - principle of operation and basic diagnostic methods
Zespół sprzęgło-hamulec - zasada działania oraz podstawy diagnostyki
Autorzy:
Roczek, K.
Krol, A.
Powiązania:
https://bibliotekanauki.pl/articles/329452.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
clutch-brake unit
diagnostic methods
operation
układ sprzęgło-hamulec
metoda diagnostyczna
użytkowanie
Opis:
Clutch-Brake system is one of the most important element of mechanical press line. The main purpose of it is to transmit the torque from the electric motor and flywheel to gear and main shaft. It ensures slide motion, but also press safety. One of the parameter that needs to be measured periodically is overrun. This value directly shows what is the condition of clutch-brake unit. The longer overrun, the worse brake operation. Unfortunately this one does not show what is the root cause of that situation. From that reason it is necessary to perform deeper diagnosis of complete system. One may find out from this article how to check clutch-brake unit in details- how to correlate slide position and slide speed with hydraulic pressure and position of safety valve (PSV).
Układ sprzęgło-hamulca jest jednym z najważniejszych elementów mechanicznej linii pras. Głównym jego zadaniem przeniesienie momentu obrotowego z silnika i koła zamachowego do przekładni i wału głównego. Realizuje on ruch suwaka, ale również zapewnia bezpieczeństwo prasy. Jednym z parametrów, jakie muszą być okresowo sprawdzane jest wybieg. Jego wartość dobrze obrazuje aktualną kondycję układu sprzęgło-hamulca. Dłuższy wybieg, gorsze działanie hamulca. Niestety sam wybieg nie wskazuje przyczyny źródłowej takiej sytuacji. Z tego powodu niezbędne jest wykonanie głębszej analizy całego układu. Z poniższego artykułu można się dowiedzieć jak dokładnie sprawdzić sprzęgło-hamulec- jak skorelować wartości pozycji oraz prędkości suwaka z ciśnieniem w układzie hydraulicznym i pozycją zaworu PSV.
Źródło:
Diagnostyka; 2018, 19, 1; 33-39
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Telematics in car fleet management
Telematyka w zarządzaniu flotą samochodową
Autorzy:
Król, A.
Rokicki, T.
Powiązania:
https://bibliotekanauki.pl/articles/28767784.pdf
Data publikacji:
2021
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Zeszyty Naukowe Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie. Ekonomika i Organizacja Logistyki; 2021, 6[4]; 49-57
2450-8055
Pojawia się w:
Zeszyty Naukowe Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie. Ekonomika i Organizacja Logistyki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The development of the lubricants applied in the porous bearings
Autorzy:
Król, A.
Giemza, B.
Kałdoński, T.
Powiązania:
https://bibliotekanauki.pl/articles/247881.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
porous bearings
lubricants
selection of lubricants
development
Opis:
In the article the development process of lubricants applied to the porous sliding bearings is described and characterised. Porous bearings are widely used in mechanical vehicles, household appliances and manufacturing equipment. However their application to tribological pairs is believed to be limited because of their properties and features such as small resistance to edge and dynamic loads, ability to work only at small sliding velocity. For the last twenty years intensive research under the development of the porous bearings has been observed and newly designed porous bearings have occurred. In that process also lubricants were developed. As the result the range of used lubricants is wider and also their chemical constitution was changed from the mineral oils to the synthetic bases giving better resistance on aging process and better rheological characteristics. Each group of lubricants was characterised and the problems of lubricant selection and application were described. In the article it was also noticed that especially the Polish manufacturers of porous materials do not regard the problem of lubricant selection seriously. Finally, it was summarised that wider selection of new lubricants for the porous bearings enables proper design of the tribological pair for the future work conditions.
Źródło:
Journal of KONES; 2007, 14, 3; 311-317
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Confocal microscopy for investigations of agricultural materials
Autorzy:
Konstankiewicz, K.
Krol, A.
Pukos, A.
Powiązania:
https://bibliotekanauki.pl/articles/25302.pdf
Data publikacji:
1995
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
microstructure
potato tissue
image transmission
computer image analysis
tandem scanning reflected light microscope
agricultural material
confocal microscopy
tomograph image
Źródło:
International Agrophysics; 1995, 09, 4
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Artificial immune system in planning deliveries in a short time
Autorzy:
Mrówczyńska, B.
Król, A.
Czech, P.
Powiązania:
https://bibliotekanauki.pl/articles/200739.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
artificial immune system
genetic algorithm
simulated annealing
open vehicle routing problem
on-time delivery
Taguchi method
Opis:
In the calculations presented in the article, an artificial immune system (AIS) was used to plan the routes of the fleet of delivery vehicles supplying food products to customers waiting for the delivery within a specified, short time, in such a manner so as to avoid delays and minimize the number of delivery vehicles. This type of task is classified as an open vehicle routing problem with time windows (OVRPWT). It comes down to the task of a traveling salesman, which belongs to NP-hard problems. The use of the AIS to solve this problem proved effective. The paper compares the results of AIS with two other varieties of artificial intelligence: genetic algorithms (GA) and simulated annealing (SA). The presented methods are controlled by sets of parameters, which were adjusted using the Taguchi method. Finally, the results were compared, which allowed for the evaluation of all these methods. The results obtained using AIS proved to be the best.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 5; 969-980
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gas outflow from an underground site – numerical simulations into baric tendency and airflow rate relationship
Emisja gazów z górotworu – symulacje numeryczne wpływu tendencji barycznej na intensywność przepływu gazów
Autorzy:
Wrona, P.
Król, A.
Król, M.
Powiązania:
https://bibliotekanauki.pl/articles/219607.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
symulacja CFD
emisja CO2
ANSYS Fluent
oddziaływanie na środowisko
zagrożenie gazowe
CFD simulation
CO2 leak
Ansys Fluent
environmental impact
gas hazard
Opis:
Gas emissions from underground sites to the atmosphere depend on many factors. Pressure drops are considered to be the most important. However, emissions can also be observed during the initial phase of the pressure rise, following a previous drop in pressure. On the other hand, gas emissions may not be detected when the pressure drops, especially when a previous pressure rise has taken place. The aim of the research was to determine the role of variations in baric tendency on airflow rate and its direction. To solve this problem a numerical model was built utilizing the Ansys Fluent software package. Subsequently, three scenarios of baric tendency variations were tested: a) rise – drop, b) drop – drop, c) drop – rise. The results showed inert behavior of gases. Under scenario (c), 1 hour after the change in tendency gases still were flowing out to the atmosphere. Considering scenario (a), it was proved that even during a pressure drop gas emissions do not take place, which can be crucial for further determination of the gas hazard at the surface or for assessment of the rate of gas emissions from a particular gas emitter. Scenario (b) merely gave an overview of the process and was mainly used for validation purposes. It gave a maximal CO2 concentration of 2.18%vol (comparable to measurements) and a CO2 mass flow rate 0.15kg/s. Taking into account greenhouse gas emissions this amounted to 514 kg CO2/h.
Emisja gazów z górotworu do atmosfery zależy od wielu czynników, z których jako najważniejszy uznawane są spadki ciśnienia atmosferycznego. Jednakże podczas prowadzonych badań wypływ gazów został także odnotowany podczas początkowego okresu zwyżki barycznej, poprzedzonego zniżką. Wystąpiło także zjawisko braku wypływu gazów mimo występującej zniżki barycznej, w szczególności po okresie wzrostu ciśnienia. Dlatego celem przeprowadzonych badań było określenie wpływu zmian ciśnienia atmosferycznego (rodzaju tendencji barycznej) na natężenie przepływu gazów pomiędzy górotworem a atmosferą oraz wyznaczenie jego kierunku. Do badań stworzono model numeryczny zjawiska w programie Ansys Fluent. Założono trzy warianty zmian ciśnienia: a) zwyżka – zniżka, b) zniżka – zniżka, c) zniżka – zwyżka. Otrzymane wyniki potwierdziły występującą bezwładność badanego procesu. W przypadku scenariusza (c), 1 gazy wypływały do atmosfery przez okres godziny po zmianie tendencji barycznej ze zniżki na zwyżkę. Rozpatrując scenariusz (a), dowiedziono, że emisja gazów może nie wystąpić mimo zachodzącej zniżki ciśnienia atmosferycznego. Może to mieć kluczowe znaczenie przy określaniu zagrożenia gazowego na powierzchni terenu lub wyznaczaniu intensywności emisji gazów z górotworu. Scenariusz (b) był scenariuszem porównawczym i służył do walidacji modelu. Dla tego scenariusza otrzymano maksymalne stężenie CO2 wynoszące 2.18%vol (wartość porównywalna ze stwierdzoną podczas pomiarów) oraz natężenie emisji CO2 równe 0.15kg/s. W przeliczeniu na emisję godzinną jest to 514kg CO2/h. Wartość ta ma znaczenie pod kątem emisji gazów cieplarnianych do atmosfery.
Źródło:
Archives of Mining Sciences; 2018, 63, 2; 251-268
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the Management of Direct and Reflected Sounds in the 5.0 Surround Sound Reproduction System
Autorzy:
Kleczkowski, P.
Król, A.
Małecki, P.
Powiązania:
https://bibliotekanauki.pl/articles/1402174.pdf
Data publikacji:
2015-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
43.38.Md
43.60.-c
43.55.Lb
43.66.Lj
Opis:
Direct and ambient sounds are usually reproduced through the same loudspeakers. In multichannel systems, with the use of anechoic recordings and auralization techniques it is possible to separate these sound components so that they are reproduced via different loudspeakers. Four basic options of management of direct and reflected sounds were investigated in a perceptual experiment. One sound source and the standard 5.0 surround sound system was used. It was found that listeners consistently preferred sound reproduction with direct sound radiated from only one loudspeaker.
Źródło:
Acta Physica Polonica A; 2015, 128, 1A; A-11-A-16
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of adding 2-ethylhexanol to jet fuel on the performance and combustion characteristics of a miniature turbojet engine
Autorzy:
Gawron, B.
Białecki, T.
Król, A.
Powiązania:
https://bibliotekanauki.pl/articles/247180.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
alternative fuels
alcohol to jet
combustion process
miniature jet engine
exhaust emission
paliwa alternatywne
proces spalania
miniaturowy silnik odrzutowy
emisja spalin
Opis:
There are currently many studies undergoing in the field of using alternative fuels for supplying different types of propulsion units. The ASTM standard in the aerospace industry, allows using five different technologies of manufacturing synthetic components apart from standard oil-based fuel for the propulsion of turbine engines (as a blend up to 50% with conventional fuel). One of these is a technology associated with the process of converting alcohols (isobutanol) to jet fuel – Alcohol to Jet (ATJ). In the research performance, emission parameters were measured on laboratory test rig with miniature turbojet engine (MiniJETRig). The test rig has been created in Air Force Institute of Technology for research and development works aimed at alternative fuels for aviation. The miniature engine was fuelled with conventional jet fuel – Jet A-1 and blend of Jet A-1 with 2-ethylhexanol. The results for this blend were compared with the results obtained for neat Jet A-1 fuel in terms of different engine operating modes, according to specified methodology. The conducted tests did not show significant differences in engine operating parameters (thrust, fuel consumption and thrust specific fuel consumption) and the values of CO, CO2 and NOx emission indices between the tested fuels. The engine tests took place in similar ambient conditions. Laboratory tests of selected physicochemical properties were also carried out for both fuel samples.
Źródło:
Journal of KONES; 2018, 25, 1; 101-109
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Challenges and Methods in Analyzes of the Heat Transfer in Polymer Dry Bearings
Wyzwania i metody w analizach przepływu ciepła w bezsmarowych łożyskach polimerowych
Autorzy:
Kasza, K.
Matysiak, Ł.
Król, A.
Powiązania:
https://bibliotekanauki.pl/articles/190705.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
modelling
thermal analysis
polymers
dry bearings
POM
modelowanie numeryczne
analiza cieplna
polimery
suche łożyska
Opis:
Heat generation and dissipation in dry polymer bearings are important aspects in their design and operation, because the overheating may lead to fast wear or product damage. The estimation of the maximum temperature under defined load conditions is crucial, but it is also a challenging task. Firstly, it is difficult to measure temperature directly at the contact surface between the bearing and the shaft. Secondly, thermocouples that are commonly used as the temperature sensors might create measurement errors. The work presented in this paper utilizes the numerical model of a polymer bearing for the analysis of the internal temperature field. The model is validated with use of experimental data; and, in order to mitigate the measurement errors of the thermocouple sensor, their geometry and properties are included in the simulation model. The achieved agreement between simulation and experimental temperatures is 10% on average, and it is judged that the numerical model may be applied for thermal analysis of the polymer bearing. The obtained results confirm the influence of the thermocouples with metallic sheaths on the temperature distribution inside the tested polymer bearing. It is shown that the value of the measurement errors depends on the layout of thermocouples and might be significantly reduced by their proper arrangement. It is believed that the presented approach for the analysis of thermal performance of dry polymer bearings might be applied to similar cases, which are characterized by large temperature gradients and require temperature sensors, that are made of the materials of high thermal conductivity.
Generacja ciepła i jego rozprowadzenie stanowi ważny element przy projektowaniu i użytkowaniu suchych łożysk polimerowych, ponieważ wysoka temperatura może prowadzić do szybszego zużycia materiału i uszkodzenia łożyska. Dlatego też koniecznym jest określenie maksymalnej temperatury występującej przy pracy łożyska. Wyznaczenie maksymalnej temperatury przy zadanym obciążeniu niesie ze sobą kilka wyzwań, mianowicie nie jest możliwy pomiar bezpośrednio na powierzchni styku łożyska i wału, oraz zastosowanie typowych czujników temperatury może prowadzić do dużych błędów pomiarowych. W publikacji pokazano możliwość zastosowania modelu numerycznego do analizy rozkładu temperatury w łożysku, a walidacja zaproponowanego modelu została dokonana w oparciu o wyniki eksperymentalne. Wykazano konieczność uwzględnienia w geometrii układu kształtu i sposobu rozmieszczenia czujników termoparowych, które mogą istotnie wpływać na mierzone wartości temperatury. Ostatecznie różnice pomiędzy wartościami zmierzonymi i wyliczonymi w zaproponowanym modelu nie przekraczały 10%, co pozwoliło uznać ten model za właściwy do analizy termicznej wybranego łożyska polimerowego.
Źródło:
Tribologia; 2018, 282, 6; 71-78
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reproduction of Phantom Sources Improves with Separation of Direct and Reflected Sounds
Autorzy:
Kleczkowski, P.
Król, A.
Małecki, P.
Powiązania:
https://bibliotekanauki.pl/articles/177770.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
spatial audio
multichannel sound reproduction
phantom sources
auralization
ambisonics abbreviations
IR (impulse response)
SIR (spatial impulse response)
RT (reverberation time)
ANOVA (analysis of variance)
DS – direct sound
RSs – reflected sounds
Opis:
In virtual acoustics or artificial reverberation, impulse responses can be split so that direct and reflected components of the sound field are reproduced via separate loudspeakers. The authors had investigated the perceptual effect of angular separation of those components in commonly used 5.0 and 7.0 multichannel systems, with one and three sound sources respectively (Kleczkowski et al. (2015b). In that work, each of the front channels of the 7.0 system was fed with only one sound source. In this work a similar experiment is reported, but with phantom sound sources between the front loudspeakers. The perceptual advantage of separation was found to be more consistent than in the condition of discrete sound sources. The results were analysed both for pooled listeners and in three groups, according to experience. The advantage of separation was the highest in the group of experienced listeners.
Źródło:
Archives of Acoustics; 2015, 40, 4; 575-584
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies