Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Żukowski, O." wg kryterium: Wszystkie pola


Wyświetlanie 1-11 z 11
Tytuł:
Fabrication and Research of Superhard (Zr-Ti-Cr-Nb)N Coatings
Autorzy:
Bondar, O.
Postolnyi, B.
Kravchenko, Yu.
Shypylenko, A.
Sobol, O.
Beresnev, V.
Kuzmenko, A.
Zukowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/1402215.pdf
Data publikacji:
2015-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.46.-w
62.20.Qp
Opis:
This work presents the results of (Zr-Ti-Cr-Nb)N superhard coatings research. The samples were fabricated by the vacuum-arc deposition method (Arc-PVD). Structure, composition and properties of these coatings were studied. The study of coatings was carried out using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. Hardness measurements and adhesion tests were performed. The coatings thickness was up to 6.2 μ m, nanocrystallites sizes ranged from 4 to 7.3 nm. Values of hardness and cohesive strength were H=43.7 GPa and $L_{C}$=62.06 N, respectively. The optimal conditions for coating deposition were found.
Źródło:
Acta Physica Polonica A; 2015, 128, 5; 867-870
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of Nanoscale TiN/MoN Multilayered Systems, Fabricated Using Arc Evaporation
Autorzy:
Pogrebnjak, A.
Bondar, O.
Abadias, G.
Eyidi, D.
Beresnev, V.
Sobol, O.
Postolnyi, B.
Zukowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/1402193.pdf
Data publikacji:
2015-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.46.-w
62.20.Qp
62.25.-g
Opis:
Using the vacuum-arc evaporation method we fabricated periodic multilayered TiN/MoN structures with different bilayer periods λ ranging from 8 to 100 nm. We found that molybdenum nitride and titanium nitride layers grown on steel show local partial epitaxy and columnar growth across interfaces. A molybdenum-titanium carbide interlayer was evidenced between the substrate and the multilayer. Molybdenum nitride and titanium nitride layers contain small (5÷30 nm) grains and are well crystallized with (100) preferred orientation. They were identified as stoichiometric fcc TiN and cubic γ-M₂N. Non-cubic molybdenum nitride phases were also detected. The hardness of the obtained structures achieved great values and maximal hardness was 31÷41.8 GPa for the multilayered structure with a 8 nm period. Hardness of the obtained coatings is 25÷45% higher in comparison with the initial single-layer nitride coatings, plasticity index of multilayered structure is 0.075.
Źródło:
Acta Physica Polonica A; 2015, 128, 5; 836-840
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of temperature on o-cresol methylation in a fluidized bed of commercial iron-chromium catalyst TZC-3/1
Autorzy:
Berkowicz, G.
Żukowski, W.
Baron, J.
Powiązania:
https://bibliotekanauki.pl/articles/778096.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
2,6-dimethylphenol
o-cresol methylation
iron-chromium catalyst TZC-3/1
fluidized bed
Opis:
The paper presents the results of the synthesis of 2,6-dimetyhlphenol (26DMP) from o-cresol. The target compound is an important substrate for polymer chemistry. Due to a large amount of o-cresol which is generated as a by-product, during the synthesis of 2,6-dimethylphenol from phenol, the methylation of o-cresol to 2,6-dimethylphenol should be examined as a separate process. The alkylation of o-cresol was carried out in a fluidized bed of commercial iron-chromium catalyst TZC-3/1. Undesirable decomposition of methyl alcohol on the catalyst generates a number of environmentally dangerous by-products such as methane, carbon dioxide, carbon monoxide. The effect of temperature on the yield of the synthesis was investigated. The synthesis process was monitored on-line in the temperature range 310-380°C, completely covering the maximum efficiency of the process. Online analysis of the process by FTIR spectroscopy gave information about products of both methylation of o-cresol and pyrolysis of methanol. The maximum 85% yield of desired 2,6-dimethylphenol with more than 85% conversion of o-cresol was achieved at 340°C, at 1:6 molar ratio of o-cresol:methanol.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 3; 100-102
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Properties of Me/Si Structures Prepared by Means of Self-Ion Assisted Deposition
Autorzy:
Tashlykov, I.
Żukowski, P.
Mikhalkovich, O.
Baraishuk, S.
Powiązania:
https://bibliotekanauki.pl/articles/1198974.pdf
Data publikacji:
2014-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.72.uf
82.80.-d
62.20.Qp
Opis:
In this paper a composite structure, topography, wettability and nanohardness of a (100) Si surface modified by means of ion-assisted deposition of metal (Me) coatings in conditions of a self-irradiation are discussed.
Źródło:
Acta Physica Polonica A; 2014, 125, 6; 1306-1308
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Annealing on the Electrical Properties οf Cz-Si Wafers Previously Subjected to the Hydrogen Ion-Beam Treatment
Autorzy:
Fedotov, A.
Korolik, O.
Mazanik, A.
Kołtunowicz, T.
Żukowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/1503985.pdf
Data publikacji:
2011-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.72.uf
81.40.Ef
Opis:
The main goal of this work is to establish the influence of annealing on the properties of Cz-Si wafers previously subjected to the hydrogen ion-beam treatment at 25 or 300-350°C. It is demonstrated by the conducted study that, despite similarity in the effects of the hydrogen ion-beam treatment at different temperatures on some electrical properties of the wafers (photovoltage spectra, thermoelectromotive force sign), thermal stability of changes in these properties due to the hydrogen ion-beam treatment depends on the hydrogenation temperature.
Źródło:
Acta Physica Polonica A; 2011, 120, 1; 108-110
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Presence of Inductivity in $(CoFeZr)_x(PZT)_{1-x}$ Nanocomposite Produced by Ion Beam Sputtering
Autorzy:
Kołtunowicz, T.
Żukowski, P.
Boiko, O.
Fedotov, A.
Larkin, A.
Powiązania:
https://bibliotekanauki.pl/articles/1402211.pdf
Data publikacji:
2015-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
62.23.Pq
79.20.Rf
81.40.Ef
72.80.Le
Opis:
This paper presents the investigations of the electrical properties of the $(CoFeZr)_{x}(PZT)_{1-x}$ nanocomposite with the metallic phase content x=43.8 at.%, which was produced by ion beam sputtering. Such preparation took place under an argon atmosphere with low oxygen content with its partial pressure $P_{O_2} = 2 \times 10^{-3} Pa$. The measurements were performed using alternating current within the frequency range of 50 Hz-10⁵ Hz for measuring temperatures ranging from 238 K to 328 K. The $(CoFeZr)_{43.8}(PZT)_{56.2}$ nanocomposite sample subjected to a 15 min annealing process in air at the temperature Tₐ=423 K demonstrates a phase angle of -90° ≤ θ ≤ 0° in the frequency range 50 Hz-10⁵ Hz. It corresponds to the capacitive type of conduction. In the frequency range 10⁴-10⁵ Hz sharp minima in selected conductivity vs. frequency characteristics occur, which corresponds to a current resonance phenomenon in RLC circuits. In case of a sample annealed at Tₐ=498 K the inductive type of conduction with 0° ≤ θ ≤ +90° occurs in a high frequency area. At the frequency $f_{r}$ characterized by the phase angle θ = 0°, the capacity value reaches its local minimum. It indicates a voltage resonance phenomenon in conventional RLC circuits. The θ = +90° crossing in the frequency dependence of phase angle corresponds to the current resonance phenomenon, which is represented by a strong local minimum in the conductivity vs. frequency characteristics.
Źródło:
Acta Physica Polonica A; 2015, 128, 5; 853-856
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of HPLC-MS with Electrospray Ionization for the Qualitative and Quantitative Analysis of Antibiotics in Pharmaceutical Formulation
Autorzy:
Likhtarovich, A.
Luhin, V.
Sovastei, O.
Zukowski, P.
Dado, M.
Powiązania:
https://bibliotekanauki.pl/articles/1402227.pdf
Data publikacji:
2015-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
32.10.Bi
33.15.Ta
82.80.-d
Opis:
This study describes the application of electrospray ionization mass spectrometry in order to identify ten antibiotics (macrolides, penicillins, aminoglycosides). An optimum procedure was developed for determination of antibiotics of different grade. Positive ion spectra of most antibiotics are higher in intensity including an [M+H]⁺ ion and produce less fragmentation and are more informative compared to the negative ion spectra. The group of antibiotics exhibits the same characteristic fragmentation. The data base was developed for identification of antibiotics comparing of their molecular and fragment ions. The results of the study showed that the method with electrospray ionization is simple and quick which is useful in the routine determination of antibiotics and in their pharmaceutical dosage forms.
Źródło:
Acta Physica Polonica A; 2015, 128, 5; 901-904
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Light Emitting Single-Crystalline Silicon Wafers Implanted with V and III Group Ions
Autorzy:
Komarov, F.
Vlasukova, L.
Milchanin, O.
Greben, M.
Parkhomenko, I.
Mudryi, A.
Wendler, E.
Zukowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/1198877.pdf
Data publikacji:
2014-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.80.-x
61.72.Ff
63.20.-e
78.66.-w
Opis:
Compound semiconductor nanocrystals (InAs, InSb, GaSb) were successfully synthesized in single crystalline Si by high fluence ion implantation at 500C followed by high-temperature rapid thermal annealing or conventional furnace annealing at 900-1100°C. Rutherford backscattering spectrometry, transmission electron microscopy/transmission electron diffraction, Raman scattering, and photoluminescence were employed to characterize the implanted layers. Two different types of the broad band emission extending over 0.75-1.1 eV were observed in photoluminescence spectra of annealed samples. One of the bands disappears in photoluminescence spectra of samples annealed at 1100C unlike the other one.
Źródło:
Acta Physica Polonica A; 2014, 125, 6; 1288-1291
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermoelectric Properties of $Ca_3Co_4O_9$-Based Ceramics Doped with Fe and/or Y
Autorzy:
Fedotov, A.
Mazanik, A.
Svito, I.
Saad, A.
Troyanchuk, I.
Bushinski, M.
Fedotova, V.
Zukowski, P.
Koltunowicz, T.
Powiązania:
https://bibliotekanauki.pl/articles/1366301.pdf
Data publikacji:
2014-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
46.25.Hf
62.20.D-
82.45.Xy
Opis:
We describe here structure and temperature dependences of conductivity σ(T), the Seebeck coefficient α(T), thermal conductivity λ(T) and figure-of-merit ZT(T) in $Ca_3Co_4O_9$ ceramics, doped with Fe and Y, depending on compacting pressure (0.2 or 6 MPa) and temperature (300 < T < 700 K). It is shown that introduction of iron and yttrium to ceramics does not alter the crystalline structure of the material. Increasing the pressure in the compacting process before the additional diffusion annealing leads to a smaller-grained structure and increase σ and λ due to reducing of the synthesized samples porosity. The Seebeck coefficients of nanocomposite ceramics $Ca_3Co_{3.9}Fe_{0.1}O_9$ and $(Ca_{2.9}Y_{0.1})(Co_{3.9}Fe_{0.1})O_9$ have linear dependences on temperature is not changed after increase of compacting pressure. Electrical-to-heat conductivity ratio (σ/λ) for the samples compacted at high (6 GPa) pressure increases not more than 20-30% in comparison with ones compacted at low (0.2 GPa) pressure, whereby ZT is increased more than 50%. The main reason for this effect is samples porosity reduction with the compacting pressure increase.
Źródło:
Acta Physica Polonica A; 2014, 125, 6; 1344-1347
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low-Temperature DC Carrier Transport in $(Co_{0.45}Fe_{0.45}Zr_{0.10})_{x}(Al_2O_3)_{1-x}$ Nanocomposites Sputtered in Mixed Argon-Oxygen Atmosphere
Autorzy:
Svito, I.
Fedotov, A.
Saad, A.
Koltunowicz, T.
Zukowski, P.
Bury, P.
Powiązania:
https://bibliotekanauki.pl/articles/1366313.pdf
Data publikacji:
2014-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.22.-f
72.20.Ee
64.60.ah
Opis:
This paper studies the temperature dependences (2 < T < 300 K) of the DC conductivity σ(T) for the $(Co_{0.45}Fe_{0.45}Zr_{0.10})_x(Al_2O_3)_{1-x}$ nanocomposites (30 < x < 65 at.%) sputtered in Ar + $O_2$ atmosphere. It is shown that at temperatures lower than 100-150 K dependences of DC conductance on temperature for all the studied samples are due to the Shklovski-Efros variable range hopping mechanism. It was also observed that σ(x,T) dependences can be attributed to the formation of FeCo-based oxide "shells" around metallic alloy nanoparticles due to incorporation of oxygen in the vacuum chamber during the deposition procedure.
Źródło:
Acta Physica Polonica A; 2014, 125, 6; 1351-1354
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multilayered Nano-Microcomposite Ti-Al-N/TiN/$Al_2O_3$ Coatings. Their Structure and Properties
Autorzy:
Pogrebnjak, A.
Shpak, A.
Kirik, G.
Erdybaeva, N.
Il'yashenko, M.
Dem'yanenko, A.
Kunitskii, Yu.
Kaverina, A.
Baidak, V.
Makhmudov, N.
Zukowski, P.
Komarov, F.
Beresnev, V.
Ruzimov, Sh.
Shypylenko, A.
Powiązania:
https://bibliotekanauki.pl/articles/1503960.pdf
Data publikacji:
2011-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.46.-w
62.20.Qp
62.25.-q
Opis:
This paper presents the first results on formation and study of structure and properties of micro- and nanocomposite combined coatings. By means of modeling the deposition processes (deposition conditions, current density-discharge, plasma composition and density, voltage) we formed the three-layer nanocomposite coatings of Ti-Al-N/Ti-N/$Al_2O_3$. The coating composition, structure and properties were studied using physical and nuclear-physical methods. The Rutherford proton and helium ion backscattering, scanning electron microscopy with microanalysis, grazing incidence X-ray diffraction, as well as nanohardness tests (hardness) were used. Measurements of wear resistance and corrosion resistance in NaCl, HCl and $H_2SO_4$ solutions were also performed. For testing mechanical properties such characteristics of layered structures as hardness H, elastic modulus E: $H^3//E^2$ etc. were measured. It is demonstrated that the formed three-layer nanocomposite coatings have hardness of 32 to 36 GPa and elastic modulus of 328 ± 18 to 364 ± 14 GPa. Its wear resistance (cylinder-surface friction) increased by factor of 17 to 25 in comparison with the substrate (stainless steel). The layers thickness was in the range of 56-120 μm.
Źródło:
Acta Physica Polonica A; 2011, 120, 1; 94-99
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-11 z 11

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies