Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Ćwiklak, J." wg kryterium: Wszystkie pola


Tytuł:
Bird modelling for simulation of bird strikes
Autorzy:
Ćwiklak, J.
Powiązania:
https://bibliotekanauki.pl/articles/245094.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
bird strike
simulation
numerical modelling
Opis:
As proved in the conducted analyses, one of the factors, which, to a large degree, exerts a negative influence on flight safety, is a potential possibility of a collision of an aircraft with birds, in particular at an airfield or in its vicinity [12, 16]. Various parts of an aircraft are subjected to damage. It appears that damage to the engine as well as penetration of the windshield is extremely dangerous. The consequence of a bird falling into the engine can be engine shutting down [6, 21], whereas penetrating the canopy can cause a serious injury to the pilot, making him unable to continue piloting an aircraft. The analysis of the literature of the object of study [7] shows that the most damage of the windshield occurs in the category of aircraft and small helicopters, whose certification requirements were not specified in this case [1, 19]. It should be remembered that apart from the compulsory experimental strength tests, conducted in laboratory conditions in order to meet certification requirements, there exist various theoretical methods, which are realized based on proper mathematical modelling of the strike event [5, 10]. Therefore, due to lack of certification requirements for the category of normal aeroplanes and small helicopters and a high degree of damage, especially to the cockpit canopy, it seems justified to conduct simulation of the strike impact by means of proper software. In order to perform the modelling in question, it is necessary to select a proper bird model and a suitable simulation method, including appropriate software. Based on the available literature devoted to the subject, there are several methods of modelling a bird shape. Investigations exploit various geometrical figures in order to model the bird shape, the most common one being a cylinder, an ellipsoid and a cylinder with hexagonal endings [10]. The aim of this article is to analyse the selected methods in order to choose one of them for further research connected with the simulation of bird-strike events into a cockpit windshield of selected aircraft.
Źródło:
Journal of KONES; 2015, 22, 2; 25-32
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical simulations of a bird strike against a helicopter windshield
Autorzy:
Ćwiklak, J.
Powiązania:
https://bibliotekanauki.pl/articles/245130.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
bird strikes
helicopter windshield
numerical analysis
LS-DYNA
Opis:
The article presents simulation results of a bird strike with a helicopter windshield of small helicopter category. It turns out that there are no certification requirements regarding windshield of this category. Therefore Agusta A109 helicopter as a representing this helicopter category has been chosen for researcher. The simulations were conducted on the basis of LS-DYNA software by means of the SPH method for bird model shape of cylinder with hemispherical endings for the speed of Vc = 285 km/h. The analyses regarded various angles of the bird model impact into windshield. As a result of the simulations, comparative analyses in the aspect of time curves of the kinetic energy, velocity, and windshield deformation were achieved. The analysis shows that at smaller angles of attack, the bird’s model has a higher speed at the moment of impact, and thus greater kinetic energy, because it did not lose speed as a result of the collision. In addition, the deflection of the windshield is smaller. In some cases, the deflection of the windshield may be observed, which indicates the elastic response of the system. In case of impact in the normal direction to the surface of the glass, the bird’s model practically pierces it. The use of a thicker pane translates into less deformation of the pane, but causes its destruction at the connection point with the helicopter carrier structure.
Źródło:
Journal of KONES; 2018, 25, 2; 81-88
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of bird strike events with the helicopter windshield
Autorzy:
Ćwiklak, J.
Grzesik, N.
Powiązania:
https://bibliotekanauki.pl/articles/245860.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
air transport
bird strikes
numerical analysis
Opis:
The aim of this article is to describe simulation results of a bird strike with a helicopter windshield. The simulation was performed based on LS-DYNA software by means of the SPH and Lagrangian methods. For the sake of the analysis, we selected a light helicopter, which is not covered by any certification requirements with regard to the windshield. The simulations were conducted for various bird shapes (sphere, cylinder, cylinder with hemispherical endings) for the cruising speed of Vc = 285 km/h. As a result of the simulations, we achieved comparative analyses of the methods at stake in the aspect of time curves of the kinetic energy, velocity and windshield deformation. The findings are depicted graphically and are presented in the form of charts. The deformations that were obtained as a result of the conducted tests may be referred to the data included in the AAIB report, which described the case of damaging the Agusta A-109C helicopter due to a collision with a seagull at the speed of approximately 278 km/h. The deformations obtained through numerical simulation do not make an accurate representation of this type of damage as in the case of a real one. Nevertheless, they reveal its character. While examining the test simulations from the quantity viewpoint, it is possible to observe slight discrepancies related to the applied approaches of bird modelling. In case of the kinetic energy, the slight discrepancies in the initial moment stem from rounding the mass of a single particle of the model, by means of the SPH method. The velocity curves of the accepted centre of the bird model vary considerably, depending upon its shape, which is linked with the deformation manner of the particular models.
Źródło:
Journal of KONES; 2016, 23, 3; 85-92
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Monitoring System for Aircraft and Veficles of Public Order Services Based on GNSS
Autorzy:
Ćwiklak, J.
Jafernik, H.
Powiązania:
https://bibliotekanauki.pl/articles/320815.pdf
Data publikacji:
2010
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
monitoring
GNSS
Opis:
Presently a lot of countries carry out aviation tests of Automatic Dependent Surveillance - Broadcast (ADB-S). The on-board GPS receiver is used as a basic source of information on position and time for that system. According to the CNS/ATM plan, traditional radars using by ATC will be replaced for ADB-S in the near future. One the vital element of the system is Global Navigational Satellite System (GNSS). According to the project a research team is going to work out an aviation tracking system for control an air traffic and ground movement in the border area. Moreover, the team will examine the system in the areas of accuracy, range of tracking and reliability as well. The proposed system consists of three basic components: the positioning, airborne GNSS receivers, the transmission of data and the ground station. The research plan is carried out taking into account a variety of air operations, such as a takeoff, a route on a low height, approaching and landing. The idea of monitoring system for aircraft using satellite navigation systems is in line with the concept of the use of GNSS in aviation, both in Europe and worldwide.
Źródło:
Annual of Navigation; 2010, 16; 15-24
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Implementation the GLONASS system in aeronautical application
Autorzy:
Ćwiklak, J.
Krasuski, K.
Powiązania:
https://bibliotekanauki.pl/articles/246602.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
Remote Maintenance System
air navigation
GLONASS
accuracy
Single Point Positioning method
Opis:
The article determines the accuracy of positioning of the aircraft with the use of a satellite system GLONASS. In addition, the SPP (Single Point Positioning) absolute positioning method was utilized in research test in article. Research test was carried out in the new software APS (Aircraft Positioning Software), used for precise GPS/GLONASS satellite positioning in air navigation. The article describes the research method and presents mathematical formulas of the SPP positioning method. In the research test, the positioning accuracy of the Cessna 172 aircraft was obtained based on comparison of results between APS and RTKLIB software. The difference of Cessna 172 aircraft coordinates in the XYZ geocentric frame between the APS and RTKLIB solution is between -7 m to +6 m. The research material developed in the article comes from an aeronautical experiment carried out with the Cessna 172 aircraft for the EPDE military airport in Deblin.
Źródło:
Journal of KONES; 2018, 25, 3; 121-128
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the DGPS method for the precise positioning of an aircraft in air transport
Autorzy:
Krasuski, K
Ćwiklak, J.
Powiązania:
https://bibliotekanauki.pl/articles/196242.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
air navigation
air transport
DGPS
accuracy
ICAO
Kalman filter
integrity
nawigacja powietrzna
transport lotniczy
precyzja
Filtr Kalmana
integralność
Opis:
This article presents research results concerning the determination of the position of a Cessna 172 aircraft by means of the DGPS positioning method. The position of the aircraft was recovered on the basis of P1/P2 code observations in the GPS navigation system. The coordinates of the aircraft were designated due to the application of the Kalman forward-filtering method. The numerical calculations were conducted using RTKLIB software in the RTKPOST module. In the scientific experiment, the authors used research materials from the test flight conducted by a Cessna 172 aircraft in the area of Dęblin in the Lublin Voivodeship in south-eastern Poland. The research experiment exploited navigation data and GPS observation data recorded by the geodetic Topcon Hiper Pro receiver mounted in the cockpit of the Cessna 172 and installed on the REF1 reference station. The typical accuracy for recovering the position of the Cessna 172 with the DGPS method exceeds in the region of 2 m. In addition, the authors specify the parameters of availability, integrity and continuity of GNSS satellite positioning in air navigation. The obtained findings of the scientific experiment were compared with the International Civil Aviation Organization’s (ICAO’s) technical standards.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2018, 98; 65-79
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the GLONASS code observations for the designation of coordinates of an aircraft in flight test mode: a case study
Autorzy:
Krasuski, K.
Ćwiklak, J.
Powiązania:
https://bibliotekanauki.pl/articles/196482.pdf
Data publikacji:
2017
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
GLONASS
ICAO
air transport
accuracy
SPP method
transport lotniczy
precyzja
Metoda SPP
Opis:
The aim of this article is to present the results of GLONASS positioning in kinematic mode in air navigation. The flight experiment was conducted at Dęblin Airfield on a Cessna 172 aircraft. The aircraft position was recovered on the basis of the single-point positioning (SPP) method of the GLONASS code observations. The numerical computations of aircraft coordinates were executed in the RTKPOST library of the RTKLIB software. The standard deviations in aircraft position in a BLh geodetic frame were checked with the ICAO standards on civil aviation for the GLONASS system. The typical accuracy of aircraft positioning on the horizontal plane is better than 12 m, whereas, on a vertical plane, it is better than 17 m. In this paper, standard deviations in aircraft position were also compared with the theoretical accuracy of the non-precision approach (NPA) landing procedure for the GNSS system. In this paper, the MRSE parameter was also calculated during the flight test.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2017, 97; 69-80
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Verification of the precise position of the aircraft in air navigation based on the solution of the RTK-OTF technique
Autorzy:
Krasuski, K.
Ćwiklak, J.
Jafernik, H.
Powiązania:
https://bibliotekanauki.pl/articles/242131.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
GPS
RTK-OTF
accuracy
air navigation
RMS
Opis:
The article presents the possibility of applying the differential technique RTK-OTF to recover the position of the aircraft in the post-processing mode. Within the framework of the conducted research, the authors designated the geocentric coordinates XYZ of the aircraft and compared them. In the research experiment, they used archive materials from the test flight of the aircraft Cessna 172 around the airfield in Deblin on 1 June 2010. The actual position of the aircraft Cessna 172 was recovered on the basis of GPS kinematic observations registered by the receiver Topcon HiperPro mounted on board the aircraft. In the calculations, the authors also used static GPS observations from the reference station REF1 as well as virtual reference stations VirA and VirB. The final coordinates of the aircraft Cessna 172 with three independent determinations RTK-OTF were defined in the AOSS v.2.0 programme. On this basis, they made verification of accuracy in determining XYZ coordinates of the aircraft Cessna 172. The dispersion of results for the difference in the designation of the X coordinate of the aircraft ranges from –0.19 m to +0.05 m. On the other hand, the size of the difference in the designation of Y-coordinate of the aircraft ranges from –0.07 m to +0.11 m. In addition, the dispersion of the results for the difference in the designation of the Z coordinate of the aircraft is from 0.19 m to +0.12 m.
Źródło:
Journal of KONES; 2017, 24, 4; 117-124
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary results of studies of the monitoring for aircraft and vehicles based on GNSS
Autorzy:
Ćwiklak, J.
Jafernik, H.
Śledziński, J.
Powiązania:
https://bibliotekanauki.pl/articles/224861.pdf
Data publikacji:
2011
Wydawca:
Politechnika Warszawska. Wydział Geodezji i Kartografii
Tematy:
nawigacja satelitarna
GNSS
satellite navigation
Opis:
Presently a lot of countries carry out aviation tests of Automatic Dependent Surveillance - Broadcast ADB-S). The on-board GPS receiver is used as a basic source of information on position and time for that system. According to the CNS/ATM plan, traditional radars using by ATC will be replaced for ADB-S in the near future. One the vital elements of the system is Global Navigational Satellite System (GNSS). According to the project a research team is going to work out an aviation tracking system for control an air traffic and ground movement in the border area. Moreover, the team will examine the system in the areas of accuracy, range of tracking and reliability as well. The proposed system consists of three basic components: the positioning, airborne GNSS receivers, the transmission of data and the ground station. The research plan is carried out taking into account a variety of air operations, such as a takeoff, a route on a low height, approaching and landing. The idea of monitoring system for aircraft using satellite navigation systems is in line witch the concept of the use of GNSS in aviation, both in Europe and worldwide.
Źródło:
Reports on Geodesy; 2011, z. 2/91; 109-119
0867-3179
Pojawia się w:
Reports on Geodesy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removing the Influence of Network Effect on Local Position Solution
Autorzy:
Ćwiklak, J.
Savchuk, S.
Doskich, S.
Powiązania:
https://bibliotekanauki.pl/articles/320695.pdf
Data publikacji:
2018
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
GNSS networks
influence of network effect
cumulative solution
local network
Opis:
To investigate and remove the network effect to the national GNSS network the results obtained from three GNSS networks which are tied to ITRF2008 using minimal constraints were compared. The first network is the EUREF Permanent Network (EPN), the second is EPN subnetwork processed by WUT LAC (WUT), the third is exactly Ukraine reference network (URN). The position differences between these networks - EPN and URN (WUT and URN) can reach 9.1 (6.6) mm for X, 4 (3.8) mm for Y and 11.7 (12.2) mm for Z. To obtain consistent station positions and velocities without network effect two weekly solutions were combined. The results demonstrate that the network effect on the local solution (Ukraine reference network) can be eliminated. This approach is valid because the same data analysis strategy was applied during both network processing.
W celu zbadania i usunięcia efektu sieci do krajowej sieci GNSS porównano wyniki uzyskane z trzech sieci GNSS, które są związane z ITRF2008 przy użyciu minimalnych ograniczeń. Pierwsza, to sieć EUREF Permanent Network (EPN), druga to podsieć EPN nadzorowana przez Politechnikę Warszawską, trzecia to sieć referencyjna Ukrainy (URN). Różnice pozycji między tymi sieciami - EPN i URN oraz (PW i URN) mogą osiągnąć 9,1 (6,6) mm dla X, 4 (3,8) mm dla Y i 11,7 (12,2) mm dla Z. Aby uzyskać spójne pozycje stacji i prędkości bez efektu sieci, połączono dwa tygodniowe rozwiązania. Wyniki pokazują, że efekt sieci w lokalnym rozwiązaniu (ukraińska sieć) może zostać wyeliminowany. To podejście jest ważne, ponieważ podczas analizy badanych sieci zastosowano tę samą strategię obliczeniową.
Źródło:
Annual of Navigation; 2018, 25; 155-164
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected aspects of implementing a GNSS system in aviation
Wybrane aspekty lotniczej implementacji systemu GNSS
Autorzy:
Jafernik, H.
Ćwiklak, J.
Fellner, R.
Powiązania:
https://bibliotekanauki.pl/articles/222931.pdf
Data publikacji:
2015
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
GNSS
flight safety
flight procedures
bezpieczeństwo lotu
procedury lotów
Opis:
This article presents a risk analysis relating to the implementation of Localizer Performance and Vertical Guidance (LPV) procedures, using a GNSS sensor, for the airports in Warsaw and Katowice. Detailed information is included in a report worked out in the framework of an international project SHERPA. The results of this research were used to determine the probability of risk occurrence, and to set safety targets, as well as to refer them to an ILS system. Following the preliminary safety system assessment (PSSA), safety requirements indispensible for reaching the required safety level were determined. The requirements are presented in respective tables. It should be emphasized that the quantitative requirements were determined using fault tree analysis (FTA).
Artykuł przedstawia analizę ryzyka na potrzeby wdrożenia procedur podejścia precyzyjnego (Localizer Performance and Vertical Guidance — LPV) z użyciem sensora GNSS dla lotnisk w Warszawie i Katowicach. Szczegóły zostały zawarte w sprawozdaniu opracowanym w ramach międzynarodowego projektu SHERPA. Przeprowadzone badania pozwoliły na wyznaczenie prawdopodobieństw występowania zagrożeń i celów bezpieczeństwa, a także na porównanie ich z systemem ILS. W wyniku wstępnej systemowej oceny bezpieczeństwa (PSSA) określone zostały wymagania niezbędne do osiągnięcia właściwego poziomu bezpieczeństwa. Wymagania przedstawiono w odpowiednich tabelach, wymagania ilościowe zostały zdeterminowane za pomocą drzew FTA.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2015, R. 56 nr 1 (200), 1 (200); 5-14
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of IGS Products for Air Navigation
Autorzy:
Jafernik, H.
Ćwiklak, J.
Krasuski, K.
Kozubal, J.
Powiązania:
https://bibliotekanauki.pl/articles/320524.pdf
Data publikacji:
2017
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
GPS
IGS
SPP method
positioning accuracy
air navigation
Opis:
Single Point Positioning (SPP) method is widely used in air, marine, and land navigation to determine the user’s position in real time and post factum. A typical accuracy for this method of determining the user’s position in the static mode is approximately 10 meters. In air operations, the SPP method accuracy can be several times lower and that may cause problems with precise positioning of an aircraft. The authors of this article presented preliminary results of research concerning aircraft positioning in the kinematic mode based on GPS observations. For this purpose, an in-flight experiment, in which a Cessna 172 aircraft was used, was performed at the airport in Mielec, Poland. The aircraft was equipped with a dual-frequency Topcon TPS HiperPro receiver, which was recording satellite observations with 1-second interval. The aircraft position was determined using the least-squares method (LSM) in the RTKLIB (RTKPOST module) software. Two research tests were performed within the scope of the experiment, i.e. in test I the aircraft position was determined on the basis of raw GPS observations and the broadcast ephemeris data whereas in test II precision products of the IGS were used, such as: precise ephemeris SP3, DCB hardware delay, clock bias data of GPS satellites and receivers in the CLK format, data of the ionosphere maps based on IONEX format, and phase center calibration of GPS satellites and receivers in the ANTEX format. The use of the IGS precision products improved the accuracy of the X coordinate to 1 m, Y to 0.7 m and Z to 1.3 m. On the basis of tests I and II, an additional RMS-3D parameter was determined, whose mean value was 4 m.
Metoda pozycjonowania w czasie rzeczywistym, nazywana Single Point Positioning, jest powszechnie stosowana w nawigacji lotniczej, morskiej, a także lądowej do określania pozycji użytkownika w czasie rzeczywistym, niekiedy również post-processing. Zwykle dokładność metody w przypadku użytkownika, który nie przemieszcza się, oceniana jest na około 10 metrów. W operacjach lotniczych jej dokładność bywa wielokrotnie niższa, co często stwarza problemy. Autorzy artykułu przedstawiają wstępne wyniki badań odnośnie dokładności pozycjonowania samolotu w wariancie dynamicznym z wykorzystaniem systemu GPS. W tym celu na lotnisku Mielec przeprowadzono eksperyment w locie z użyciem samolotu Cessna 172, który wyposażono w dwuczęstotliwościowy odbiornik Topcon TPS HiperPro rejestrujący obserwacje co sekundę. Jako pozycje referencyjne przyjęto pozycje obliczane metodą najmniejszych kwadratów programem RTKLIB (moduł RTKPOST). W ramach opisywanego eksperymentu przeprowadzono dwa testy - w pierwszym określano pozycje z użyciem surowych pomiarów GPS oraz efemeryd pokładowych, w drugim użyto efemeryd oferowanych przez IGS. Były to takie dane, jak efemerydy precyzyjne SP3, poprawki zegarów satelitów w formacie CLK, mapy jonosfery w formacie IONEX oraz dane odnośnie centrum fazowego anten w formacie ANTEX. Użycie produktów oferowanych przez IGS znacząco poprawiło dokładność wyznaczeń, przy czym współrzędna X została wyznaczona z dokładnością 1 m, współrzędna Y - 0,7 m, natomiast Z - 1,3 m. Dodatkowo wyznaczono średni błąd pozycji w przestrzeni 3D, którego wartość wyniosła około 4 m.
Źródło:
Annual of Navigation; 2017, 24; 285-300
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
GNSS for an Aviation
Autorzy:
Grzegorzewski, M.
Cwiklak, J.
Jafernik, H.
Fellner, A.
Powiązania:
https://bibliotekanauki.pl/articles/117124.pdf
Data publikacji:
2008
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Global Navigation Satellite System (GNSS)
Air Navigation
Aviation, Global Positioning System (GPS)
Aircraft-Based Augmentation System (ABAS)
satellite based augmentation system (SBAS)
Ground-Based Augmentation System (GBAS)
EGNOS
Opis:
In Polish aviation on-board GPS units are used for enroute procedures mainly. The use of GNSS for approach and landing procedures requires overcoming a lot of obstructions, including both organizational and technical ones. The paper presents information connecting with GNSS implementation in aviation.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2008, 2, 4; 345-350
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
GNSS for an Aviation Analysis Based on EUPOS and GNSS/EGNOS Collocated Stations in PWSZ CHELM
Autorzy:
Fellner, A.
Cwiklak, J.
Jafernik, H.
Trominski, P.
Zajac, J.
Banaszek, K.
Powiązania:
https://bibliotekanauki.pl/articles/117333.pdf
Data publikacji:
2008
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Global Navigation Satellite System (GNSS)
aviation
EGNOS
satellite based augmentation system (SBAS)
geographic information system (GIS)
Global Positioning System GPS
ICAO Requirements
Air Navigation
Opis:
Under the umbrella of PWSZ Chelm, taking account of future implementation of navigation using EUPOS and GNSS based on EGNOS several planned actions were carried out in the 2005-2006. The actions in particular contribute to: 1. ICAO and EGNOS requirements and coverage area (Chelm Town located near Polish-Ukrainian border is also at the east border of planned EGNOS coverage for ECAC states). 2. Preparatory activities to establishing the EUPOS station in PWSZ Chelm. Cooperation of PWSZ Chelm and ULC (Polish Aviation Regulator) in the frame of conventional NAV aids use and GNSS implementation in aviation. 3. Analysis of ICAO requirements and methods of testing SIS (Signal In Space) needed to certify GNSS in Poland for use for an aviation. 4. Preparatory activities to establishing the EGNOS SIS monitoring station based on EUROCONTROL Pegasus software and GNSS/EGNOS receiver Septentrio PolaRx2e. 5. Analysis of methods for exchange of information between EUPOS and EGNOS SIS station to initiate the application of satellite positioning systems to air navigation in Poland. The project EUPOS is a European initiative aiming at establishment of a uniform DGNSS (Differential Global Navigation Satellite System) basis infrastructures in Central and Eastern European countries including Chelm Town where PWSZ is localized playing vital role in GIS/GNSS implementation in the region and Polish aviation.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2008, 2, 4; 351-356
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Falconer activities as a bird presence management tool at Deblin military airfield - their influence on the flock size
Aktywność sokolnika jako metoda zarządzania obecnością ptaków na Lotnisku Wojskowym w Dęblinie - wpływ na wielkość stad wybranych gatunków
Autorzy:
Kitowski, I.
Grzywaczewski, G.
Cios, S.
Ćwiklak, J.
Krop, S.
Grzegorzewski, M.
Powiązania:
https://bibliotekanauki.pl/articles/2197105.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Źródło:
Annales Universitatis Mariae Curie-Skłodowska. Sectio EE: Zootechnica; 2011, 29, 4; 68-73
0239-4243
2083-7399
Pojawia się w:
Annales Universitatis Mariae Curie-Skłodowska. Sectio EE: Zootechnica
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies