Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "soil constitutive models" wg kryterium: Temat


Wyświetlanie 1-2 z 2
Tytuł:
The influence of the soil constitutive models on the seismic analysis of pile-supported wharf structures with batter piles in cut-slope rock dike
Autorzy:
Deghoul, Lylia
Gabi, Smail
Hamrouni, Adam
Powiązania:
https://bibliotekanauki.pl/articles/1845127.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
iles
wharf
cut-slope rock dike
finite element analysis
seismic
soil constitutive models
Opis:
In coastal regions, earthquakes caused severe damage to marine structures. Many researchers have conducted numerical investigations in order to understand the dynamic behavior of these structures. The most frequently used model in numerical calculations of soil is the linear-elastic perfectly plastic model with a Mohr-Coulomb failure criterion (MC model). It is recommended to use this model to represent a first-order approximation of soil behavior. Therefore, it is necessary to accommodate soil constitutive models for the specific geotechnical problems. In this paper, three soil constitutive models with different accuracy were applied by using the two-dimensional finite element software PLAXIS to study the behavior of pile-supported wharf embedded in rock dike, under the 1989 Loma Prieta earthquake. These models are: a linear-elastic perfectly plastic model (MC model), an elastoplastic model with isotropic hardening (HS model), and the Hardening Soil model with an extension to the small-strain stiffness (HSS model). A typical pile-supported wharf structure with batter piles from the western United States ports was selected to perform the study. The wharf included cut-slope (sliver) rock dike configuration, which is constituted by a thin layer of rockfill overlaid by a slope of loose sand. The foundation soil and the backfill soil behind the wharf were all dense sand. The soil parameters used in the study were calibrated in numerical soil element tests (Oedometer and Triaxial tests). The wharf displacement and pore pressure results obtained using models with different accuracy were compared to the numerical results of Heidary-Torkamani et al.[28] It was found that the Hardening Soil model with small-strain stiffness (HSS model) gives clearly better results than the MC and HS models. Afterwards, the pile displacements in sloping rockfill were analyzed. The displacement time histories of the rock dike at the top and at the toe were also exposed. It can be noted that during the earthquake there was a significant lateral ground displacement at the upper part of the embankment due to the liquefaction of loose sand. This movement caused displacement at the dike top greater than its displacement at the toe. Consequently, the behavior of the wharf was affected and the pile displacements were important, specially the piles closest to the dike top.
Źródło:
Studia Geotechnica et Mechanica; 2020, 42, 3; 191-209
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parametric study of deep excavation in clays
Autorzy:
Mitew-Czajewska, M.
Powiązania:
https://bibliotekanauki.pl/articles/200380.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
numerical analysis
constitutive models
hypoplasticity
hardening soil model
analiza numeryczna
modele konstytutywne
hypoplastyczność
utwardzanie gleby
model gleby
Opis:
The most challenging issue when analyzing geotechnical structures by means of finite element method is the choice of appropriate constitutive soil model, especially with reference to serviceability limit states. The paper presents parametric study of a deep excavation in clays aiming to qualify the applicability of different soil constitutive models in such specific soil conditions. Three types of constitutive models are considered in the paper: linear elastic – perfectly plastic model (Mohr-Coulomb) as a simple and well recognized reference, hypoplastic model (Hypoplastic Clay) and nonlinear elasto-plastic cap models (Hardening Soil and Hardening Soil Small). Numerical analysis was performed using two finite element codes – Plaxis and GEO5 FEM both in 2D space and the results were compared to in-situ displacements measurements. The discussion on the suitability of chosen constitutive models for advanced modelling of deep excavation in preconsolidated clays is presented.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 5; 747-754
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-2 z 2

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies