Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "acoustic monitoring" wg kryterium: Temat


Tytuł:
Ocean average current measurement using acoustic phase monitoring
Autorzy:
Zieliński, A.
Zhou, L.
Butowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/331688.pdf
Data publikacji:
2008
Wydawca:
Polskie Towarzystwo Akustyczne
Tematy:
ocean-related activities
acoustic phase monitoring
hydroacoustic
Opis:
Knowledge of water currents is important in several ocean-related activities. Typically, current speed and direction are measured at a certain fixed location and depth (or depth profile) by a suitable current meter. In this paper, we propose a novel method for average current speed measurement along a path, based on acoustic phase monitoring. In this method, a transmitter and a receiver are installed at the ends of a designated path. A transmitted sinusoidal signal propagates along the path to the receiver. Intervening currents will introduce Doppler frequency shifts that can be measured as a rate of phase change in the received signal. The phase is recovered by means of a phase detector and unwrapping techniques. The desirable feature of the proposed method is that average current speed is monitored along the entire path. Moreover, the estimated frequency shift via the phase measurement achieves a higher accuracy in current measurement than does a measure of frequency directly by an FM demodulator.
Źródło:
Hydroacoustics; 2008, 11; 459-467
1642-1817
Pojawia się w:
Hydroacoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recognition of the 24-hour Noise Exposure of a Human
Autorzy:
Korbiel, T.
Stępień, B.
Batko, W.
Barański, R.
Mleczko, D.
Pawlik, P.
Blaut, J.
Powiązania:
https://bibliotekanauki.pl/articles/177799.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
noise hazard
24-hour noise exposure
Personal Indicator of Noise Hazard
acoustic monitoring
Opis:
The civilisation progress has caused noise to become one of essential pathogenic and life comfort decreasing factors. There are several legal regulations aimed at controlling the noise influence on humans. Assessment of the twenty-four-hour influence of noises in various environments constitutes an essential problem. The answer can be supplied by 24-hour monitoring of the sound pressure. This paper is an attempt to learn the real loading of humans by noises. A personal noise indicator was used in measurements. The human 24-hour activity was divided into cycles allowing to model noise hazards. The collected data, even though they did not signal exceeding of individual standards, in the 24-hour period indicated the essential noise influence. These results indicate the need of investigations to recognise the 24-hour noise load of a human, with taking into account various forms of their activity and the need of rest.
Źródło:
Archives of Acoustics; 2017, 42, 4; 601-607
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Creating Acoustic Maps Employing Supercomputing Cluster
Autorzy:
Czyżewski, A.
Kotus, J.
Szczodrak, M.
Powiązania:
https://bibliotekanauki.pl/articles/177400.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
noise pollution
acoustic noise monitoring
noise propagation model
supercomputing
acoustic maps
Opis:
The implemented online urban noise pollution monitoring system is presented with regard to its conceptual assumptions and technical realization. A concept of the noise source parameters dynamic assessment is introduced. The idea of noise modeling, based on noise emission characteristics and emission simulations, was developed and practically utilized in the system. Furthermore, the working system architecture and the data acquisition scheme are described. The method for increasing the speed of noise map calculation employing a supercomputer is explained. The practical implementation of noise maps generation and visualization system is presented, together with introduced improvements in the domain of continuous noise monitoring and acoustic maps creation. Some results of tests performed using the system prototype are shown. The main focus is put on assessing the efficiency of the acoustic maps created with the discussed system, in comparison to results obtained with traditional methods.
Źródło:
Archives of Acoustics; 2011, 36, 2; 395-418
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Marine Mammals Classification using Acoustic Binary Patterns
Autorzy:
Nadir, Maheen
Adnan, Syed M.
Aziz, Sumair
Khan, Muhammad Umar
Powiązania:
https://bibliotekanauki.pl/articles/1953520.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
marine mammals
1D Local Binary Patterns
Mel frequency cepstral coefficients
feature extraction
passive acoustic monitoring
Opis:
Marine mammal identification and classification for passive acoustic monitoring remain a challenging task. Mainly the interspecific and intraspecific variations in calls within species and among different individuals of single species make it more challenging. Varieties of species along with geographical diversity induce more complications towards an accurate analysis of marine mammal classification using acoustic signatures. Prior methods for classification focused on spectral features which result in increasing bias for contour base classifiers in automatic detection algorithms. In this study, acoustic marine mammal classification is performed through the fusion of 1D Local Binary Pattern (1D-LBP) and Mel Frequency Cepstral Coefficient (MFCC) based features. Multi-class Support Vector Machines (SVM) classifier is employed to identify different classes of mammal sounds. Classification of six species named Tursiops truncatus, Delphinus delphis, Peponocephala electra, Grampus griseus, Stenella longirostris, and Stenella attenuate are targeted in this research. The proposed model achieved 90.4% accuracy on 70-30% training testing and 89.6% on 5-fold cross-validation experiments.
Źródło:
Archives of Acoustics; 2020, 45, 4; 721-731
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Controlling of Violations of the Basic Assumptions of the Recurrent Assessment Model of Long-Term Noise Indicators
Autorzy:
Batko, W.
Bal, R.
Powiązania:
https://bibliotekanauki.pl/articles/177926.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
acoustic monitoring of environment
estimation of long-term noise indicators
controlling of violations of model assumptions
Opis:
The function of a new estimation procedure of long-term noise indicators is considered in this study. New possibilities are related to the stochastic modelling of the control data formation mechanism. Assuming the mathematical formalism based on the adaptive model of exponential smoothing of control data, the need of controlling at each estimation stage of long-term noise indicators, the adherence to the model assumptions is formulated. The procedure of its realisation is described in the paper. The tracking signal method referred to the tested errors of the assumed model was applied. The ratio of the sum of model errors in relation to the average absolute error, generated by the assumed approximation, was selected as the representative of the tracking signal. Conditions for the acceptation of the model assumption were defined. The analysis of functionality of the developed solution was illustrated by the results of a continuous noise monitoring recorded at one of the main arteries in Kraków.
Źródło:
Archives of Acoustics; 2010, 35, 3; 361-369
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Safety problem of cavity under open pit bench
Zagadnienie bezpieczeństwa zapadlisk pod warstwą wybierania w kopalni odkrywkowej
Autorzy:
Liu, X.
Li, X.
Gong, F.
Liu, K.
Powiązania:
https://bibliotekanauki.pl/articles/219373.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cavity
open pit
laser scanning
stability analysis
acoustic emission monitoring
pustki
kopalnie odkrywkowe
skanowanie laserowe
analiza stabilności
monitorowanie emisji akustycznej
Opis:
Some open pits in China are severely threatened by hidden cavities under benches which are always inaccessible and unmapped. The first thing to be well considered is safe and precise cavity detection, as the conventional detection methods cannot output a clear cavity vision, a three-dimensional laser measurement system is employed to perform detection, which is deployed from the surface through boreholes. The results from the scanner demonstrated very well the detailed level of information that can be collected In a cavity using this method, with the cavities’ layout under various benches being fully mapped. As detected cavities are always in horizontal and vaulted roof shape, two different theoretical calculation methods are proposed to analyze the cap rock stability for different roof shape. And also, the three-dimensional solid model generated through scanned laser data is used for stability numerical simulation by converting the data format into the one that recognized in corresponding software. Furthermore, acoustic emission technique is adopted to carry out long term real time rupture monitoring in cap rock, and four kinds of typical monitoring results are discussed which represent the rupture behavior in cap rock of unstable cavity, stable cavity, cavity with large working drill above and cavity beside explosion site. Thus, a complete safety evaluation system for such cavity will be established to ensure safe operation above.
W wielu kopalniach odkrywkowych na terenie Chin powstało zagrożenie wskutek istnienia ukrytych pustek pod warstwami wybierania (ławami), część z nich jest trudno dostępna, a niektóre nie są nawet naniesione na mapach. Najważniejszą kwestią jest więc bezpieczna i dokładna lokalizacja pustek. Ponieważ konwencjonalne metody wykrywania nie są w stanie ujawnić dokładnego obrazu pustek, zastosowano trójwymiarowy laserowy system detekcji pustek, zakładany z powierzchni poprzez wywiercone otwory. Odczyty ze skanera ujawniły dokładne zarysy pustek. Z pomocą tej metody można dokładnie obrazować układy pustek pod warstwami wybierania (ławami). Ponieważ stropy w wykrywanych pustkach są zawsze poziome lub sklepione, zaproponowano dwie teoretyczne metody obliczania stabilność stropu dla różnych jego kształtów. Ponadto, na podstawie danych ze skanera wygenerowano model bryły trójwymiarowej, który wykorzystany został do numerycznych badań stabilności stropu poprzez przekształcenie formatu danych na format rozpoznawalny w zastosowanym oprogramowaniu. Zastosowano także techniki pomiary emisji akustycznej w długofalowym monitorowaniu spękań stropu w czasie rzeczywistym, przeanalizowano cztery rodzaje uzyskanych wyników opisujących zachowanie stropu w przypadku pustek niestabilnych, stabilnych, pustek ponad którymi wykonano otwory znacznych rozmiarów oraz pustek w pobliżu miejsc prowadzenia prac strzałowych. Opracowano w ten sposób pełny system oceny stabilności pustek zapewniający bezpieczne prowadzenie prac ponad nimi.
Źródło:
Archives of Mining Sciences; 2015, 60, 2; 565-580
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification and monitoring of noise sources of CNC machine tools by acoustic holography methods
Autorzy:
Józwik, J.
Powiązania:
https://bibliotekanauki.pl/articles/102033.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
noise
acoustic holography
monitoring
CNC machine tools
machining
Opis:
The paper presents the analysis of sound field emitted by selected CNC machine tools. The identification of noise sources and level was measured by acoustic holography for the 3-axis DMC 635eco machine tool and the 5-axis vertical machining centre DMU 65 monoBlock. The acoustic holography method allows precise identification and measurement of noise sources at different bandwidths of frequency. Detection of noise sources in tested objects allows diagnosis of their technical condition, as well as choice of effective means of noise reduction, which is highly significant from the perspective of minimising noise at the CNC machine operator workstation. Test results were presented as acoustic maps in various frequency ranges. Noise sources of the machine tool itself were identified, as well as the range of noise influence and the most frequent places of reflections and their span. The results of measurements were presented in figures and diagrams.
Źródło:
Advances in Science and Technology. Research Journal; 2016, 10, 30; 127-137
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Failure mode analysis to define process monitoring systems
Autorzy:
McLeay, T.
Turner, M. S.
Powiązania:
https://bibliotekanauki.pl/articles/100045.pdf
Data publikacji:
2011
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
fmea
process monitoring
Bayesian networks
PCA
sensor fusion
acoustic emission
Opis:
The high costs of using skilled operators in production processes has built a demand for reduced manning, 'lights out machining' manufacture. Process monitoring systems have become a widely researched area in recent years since there is a need for intelligent systems to replace the manual intervention in existing processes. Furthermore, using modern sensors and signal processing techniques, monitoring systems can obtain more informatio about a process and therefore reduce costs further though maximised life of cutting tools, optimised cutting parameters and reduced scrap or re-work. With many application areas available, such as tool condition monitoring, chatter avoidance or feedback control of cutting parameters, it is not always apparent what the key aspects required by an intelligent monitoring system are. In addition, different machining processes have different demands and limitations for monitoring. This paper considers an analytical approach to define the requirements of a monitoring system. A process failure mode effect analysis (FMEA) is carried out to determine the weaknesses of current production processes. From this analysis, the relationships between failures, causes and effects can be used to populate conditional relationships between process faults and sensor signal features in a monitoring system.
Źródło:
Journal of Machine Engineering; 2011, 11, 4; 118-129
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acoustic emission analysis of the plastic deformation stages of degraded low-carbon steel after long-term operation in the oil refining and petrochemical processing
Autorzy:
Lyasota, I.
Sarniak, Ł.
Kustra, P.
Powiązania:
https://bibliotekanauki.pl/articles/351029.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
monitoring
low carbon steel
plastic deformation
acoustic emission
refinery industry
Opis:
This paper presents results obtained from a laboratory investigation conducted on material from a pressure vessel after longterm operation in the oil refinery industry. The tested material contained structural defects which arose from improper heat treatment during steel plate manufacturing. Complex tensile tests with acoustic emission signal recording were conducted on both notched and unnotched specimens. The detailed analysis of different acoustic emission criteria allowed as to detect each stage of plastic deformation and microstructural damage processes after a long-term operation, and unused carbon steels during quasi-static axial tension testing. The acoustic emission activity, generated in the typical stages of material deformation, was correlated by microscopy observations during the tensile test. The results are to be used as the basis for new algorithms for the assessment of the structural condition of in-service pressure equipment.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 1; 143-151
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Discrimination of Acoustic Emission Signals for Damage Assessment in a Reinforced Concrete Slab Subjected to Seismic Simulations
Autorzy:
Sagasta, F. A.
Torné, J. L.
Sánchez-Parejo, A.
Gallego, A.
Powiązania:
https://bibliotekanauki.pl/articles/177863.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
acoustic emission
structural health monitoring
reinforced concrete structures
signal processing
Opis:
The purpose of this work is to distinguish between Acoustic Emission (AE) signals coming from mechanical friction and AE signals coming from concrete cracking, recorded during fourteen seismic simulations conducted with the shaking table of the University of Granada on a reinforced concrete slab supported on four steel columns. To this end, a particular criterion is established based on the Root Mean Square of the AE waveforms calculated in two different temporal windows. This criterion includes a parameter calculated by optimizing the correlation between the mechanical energy dissipated by the specimen (calculated by means of measurements with accelerometers and displacement transducers) and the energy obtained from the AE signals recorded by low-frequency piezoelectric sensors located on the specimen. The final goal of this project, initiated four years ago, is to provide a reliable evaluation of the level of damage of Reinforced Concrete specimens by means of AE signals to be used in future Structural Health Monitoring strategies involving RC structures.
Źródło:
Archives of Acoustics; 2013, 38, 3; 303-310
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the possibility of using acoustic emission for monitoring technical condition of the fuel injector in 3AL25/30 engine
Autorzy:
Dudzik, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/27315939.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
emisja akustyczna
diagnostyka
monitoring
wtryskiwacz
układ paliwowy
acoustic emission
diagnostics
injector
fuel system
Opis:
Acoustic emission method (AE) can be used for the diagnosis of machine parts such as, for example: fuel injectors. This paper presents the methodology and research results of 3AL25/30 engine fuel injector. During research was studied one injector in good condition and second with simulated failure involving closing 2 of 9 holes of the injector tip. Research was carried out on a laboratory test stand using a set of acoustic emission Vallen System. This set included: 4 channel signal recorder AMSY 6, two measurement modules ASIP-2/S, preamplifier with a frequency range 20 kHz-1 MHz and the strengthening of 34 dB, AE signal measurement sensor type VS 150M, with a frequency range 100-450 kHz. During the study, the acoustic emission (AE) generated by tested injector was recorded. The following parameters were determined: amplitude, rise time, duration time, total time, number of events - hits, the effective value of the signal (RMS). Analysis of the results showed significantly longer total time of the injection in the case of damaged injector compared to the injector in good conditions. Signal amplitude was higher, however, the RMS signal reached approximately 3-times lower value for the injector with damaged tip. This means lower quality fuel atomization. Laboratory test results were compared with signals recorded on injectors installed in the engine. Analysis of the signals allowed detection damage of the injector installed in the engine during normal operation.
Źródło:
New Trends in Production Engineering; 2018, 1, 1; 419-425
2545-2843
Pojawia się w:
New Trends in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Relative infaunal bivalve density assessed from split beam echosounder angular information
Autorzy:
Sanchez-Carnero, N.
Rodriguez-Perez, D.
Zaragoza, N.
Espinosa, V.
Freire, J.
Powiązania:
https://bibliotekanauki.pl/articles/48622.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
shellfish
bivalve
textural feature
stock assessment
acoustic technique
split-beam echosounder
mapping
monitoring
Źródło:
Oceanologia; 2014, 56, 3
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of Bee Colony Acoustic Signals using the Dynamic Time Warping Algorithm
Autorzy:
Polyniak, Yu.
Fedasyuk, D.
Marusenkova, Tetyana
Powiązania:
https://bibliotekanauki.pl/articles/972922.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
Acoustic Signal
Signal Recognition
Dynamic Time Warping
Fast Fourier Transform
Automated Bee Colony Monitoring
Opis:
The work deals with automated recognition of the current state of a bee colony, for continuous monitoring of processes running in a bee hive is of key importance in beekeeping. The dynamic time warping algorithm is considered as a method of analyzing acoustic signals produced by a bee colony. Upon such an analysis one can make inferences about the current state of the colony. We have developed a software module for audio-signal identification, which is to be used as a part of an automated bee colony monitoring system, and a software tool for verification of the module. We evaluated the efficacy of the algorithm, the probability of bee colony states correctly recognized using acoustic signals produced by the colony and consumed computational resources by the example of a queen bee’s sounds recorded during swarming. The dependencies of the signal processing time and the successful pattern recognition probabilities on the frame sample rate and frame size are presented.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2019, 8, 4; 19-27
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości uproszczenia procedury monitorowania hałasu tramwajowego z punktu widzenia automatyzacji procesu analitycznego
Possibility Simplify the Procedure of Tram Noise Monitoring from Viewpoint of Automation Analytical Process
Autorzy:
Komorski, P.
Czechyra, B.
Nowakowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/215623.pdf
Data publikacji:
2016
Wydawca:
Instytut Kolejnictwa
Tematy:
tramwaj
pomiary akustyczne
system monitorowania hałasu
tram
acoustic measurements
noise monitoring system
rail vehicles
Opis:
W artykule przedstawiono analizę pomiarów sygnałów akustycznych generowanych podczas testu pass-by wybranego typu lekkich pojazdów szynowych w warunkach normalnej eksploatacji. Pomiary hałasu wykonano zgodnie z wymaganiami normy ISO 3095. Celem analizy było sprawdzenie, w jakim stopniu uwzględnianie czasu przed i po przejeździe pojazdu przez punkt pomiarowy, ma wpływ na obliczanie ekspozycyjnego poziomu dźwięku A.
The article presents the results of analysis carried out for automatization of analytical procedures for tram noise monitoring. The primary analytical procedures were developed based on the ISO 3095:2005 standard. However, it was decided to develop own research methodology. Due to, that fulfillment of all the requirements in strict urban area is impossible. The analysis of sensitivity symptom to different averaging data condition changes is presented in the comparative study. Also the possibility of its application in the vibroacoustic monitoring system of trams is proposed. There are the two main aims of the study. Firstly, checking the extent to which, the time before and after the passage of the vehicle through the measurement point, has an impact on the calculation of the exposure sound level A (SEL), on selected tram. Secondly, ensure if obtained characteristics can be considered as own, assigned to the type of vehicle. The study presents a part of research carried out in the Department of Rail Vehicles of University of Technology in Poznan, in terms of comprehensive description of the interaction of light rail vehicle – track in a highly urbanized environment. In this range, the crucial becomes an analysis of vibroacoustic activity of the tram, which is presented here.
Źródło:
Problemy Kolejnictwa; 2016, 170; 25-30
0552-2145
2544-9451
Pojawia się w:
Problemy Kolejnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prototyp akustycznego urządzenia komunikacyjnego do monitorowania sieci wodociągowych
The prototype of an acoustic communication device for monitoring of water distribution networks
Autorzy:
Kosior, Mateusz
Przystałka, Piotr
Kronhof, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/1366421.pdf
Data publikacji:
2019
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
bezprzewodowa sieć sensoryczna
komunikacja akustyczna
system monitorujący
wireless sensor network
acoustic communication
monitoring system
Opis:
Obecnie istnieje wiele rozwiązań systemów monitorujących różnorodne obiekty techniczne. Część rozwiązań jest projektowana specjalnie z myślą o sieciach wodociągowych. Głównym celem artykułu jest przedstawienie zastosowania modułów do komunikacji akustycznej wewnątrz rurociągu, w którym medium komunikacyjnym jest woda. Przedstawione rozwiązanie stanowi alternatywę dla obecnie wykorzystywanych metod komunikacji w bezprzewodowych sieciach sensorycznych (WSN). We wstępie krótko scharakteryzowano problem badawczy oraz opisano tematykę bezprzewodowych sieci sensorycznych. Kolejne sekcje opisują koncepcję węzła sieci sensorycznej oraz metody modulacji i kodowania sygnałów wykorzystane podczas badań, jak również przedstawiają prototyp węzła sieci. Końcowe akapity poświęcone zostały wynikom wstępnych badań, najważniejszym wnioskom i planowi dalszych badań.
A plethora of monitoring systems of different technical objects exists nowadays. Some of the solutions are specifically designed for water supply networks. The main objective of the paper is to describe the use of acoustic signal modules for communication in pipeline systems, where water is used as the transmission medium. This idea is proposed as an alternative to methods used in Wireless Sensor Networks (WSNs) nowadays. The paper begins with short introduction to the research problem and WSNs in general. Further sections describe the concept of a node, methods of signal modulation and coding used during the research and a brief description of acoustic node prototype. Results of the preliminary tests together with the major conclusions and future research plans are discussed at the end of the paper.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2019, 24, 1; 56-65
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies