Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Legnica-Głogów Copper District (LGOM)" wg kryterium: Temat


Wyświetlanie 1-4 z 4
Tytuł:
Ocena jakościowo-ilościowa gazów pochodzących z degazacji rdzeni skalnych na tle właściwości petrofizycznych skał kompleksu miedzionośnego południowej części monokliny przedsudeckiej
Qualitative and quantitative evaluation of gases originating from the rock cores degassing against the petrophysical properties of the rocks from copper-bearing complex of the southern part of the Fore-Sudetic Monocline
Autorzy:
Kania, Małgorzata
Janiga, Marek
Powiązania:
https://bibliotekanauki.pl/articles/1835063.pdf
Data publikacji:
2019
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
degazacja
gaz desorbowany
gaz resztkowy
chromatografia gazowa
skład molekularny
właściwości petrofizyczne
seria miedzionośna
LGOM
degassing
desorbed gas
residual gas
gas chromatography
molecular composition
petrophysical properties
copper-bearing series
Legnica-Głogów Copper District (LGOM)
Opis:
Przedmiotem badań były próbki rdzeni pochodzące z utworów miedzionośnych, w celu określenia zależności różnego typu parametrów geochemicznych z wykształceniem litologicznym badanych skał w nawiązaniu do badań petrofizycznych. W związku z tym przeanalizowany został zarówno skład molekularny gazów pod kątem obecności azotu nadmiarowego, helu, wodoru, związków siarki i węglowodorów, jak również dokładna ilość wydzielonego gazu. Badania przeprowadzono na próbkach gazu desorbowanego oraz na próbkach gazu resztkowego i na tej podstawie zostały określone pewne prawidłowości zmian jakościowo-ilościowych, co w konsekwencji pozwala na przewidywanie lokalizacji miejsc o zwiększonej akumulacji dla poszczególnych gazów. Dodatkowo analizie statystycznej poddano wybrane właściwości petrofizyczne skał, z których pozyskano gaz. Na podstawie uzyskanych wyników badań można zaklasyfikować skały takie, jak piaskowiec i dolomit wapnisty, jako typy litologiczne o wysokim potencjale akumulacyjnym dla gazów. Zdecydowanie najwyższa ilość gazu resztkowego uzyskana została z serii piaskowców. Nieco mniejsze ilości gazu wydzieliły się z kolei z próbek dolomitu wapnistego. Jeszcze mniejsze zanotowano dla soli kamiennej, a najniższe dla próbek anhydrytowych. Średnie ilości wydzielonego gazu resztkowego doskonale korelują z właściwościami petrofizycznymi, takimi jak: średnie wartości porowatości całkowitej i otwartej, powierzchnia właściwa oraz przepuszczalność. Na podstawie przeprowadzonej analizy, zaobserwowano duże zróżnicowanie oznaczeń zarówno ilościowojakościowych gazów, jak i właściwości petrofizycznych badanych rdzeni piaskowców i dolomitów wapnistych (gdzie mogą być kumulowane duże ilości gazu, co stanowi zasadnicze zagrożenie dla wyrobisk górniczych). Z kolei dostępne wyniki badań dla próbek anhydrytowych oraz soli kamiennej sugerują, że w analizowanym obszarze (pomimo stosunkowo słabych właściwości kolektorskich skał) pojawiają się jednak warunki do wystąpienia lokalnych pułapek gazu w strefach o podwyższonej porowatości.
The subject of the study were core samples originating from copper-bearing deposits, in order to determine the correlation of different types of geochemical parameters with the lithological variation of the studied rocks in reference to petrophysical investigations. The molecular gas composition for the presence of excess nitrogen, helium, hydrogen, sulfur compounds, and hydrocarbons, as well as the exact amount of evolved gas, were examined. The tests were performed on samples of desorbed gas and on residual gas samples, and on this basis certain regularities of qualitative and quantitative changes were determined, which in turn allows to forecast the location of places with increased accumulation of individual gases. Additionally, the petrophysical properties of the rocks from which the gas was obtained, were subjected to statistical analysis. Based on the obtained research results, rocks such as sandstone and calcareous dolomite can be classified as lithological types with high accumulation capacities for gases. It is clear that the highest amount of residual gas was obtained from a series of sandstones, slightly smaller amounts of gas released from the samples of calcareous dolomite; less were noted for rock salt, and the lowest for anhydrite samples. The average amount of separated residual gas perfectly correlates with the petrophysical properties, such as: mean values of total and open porosity, specific surface area, and permeability. On the basis of the analysis, a large diversity of quantitative and qualitative gas coposition determinations, and the petrophysical properties of the studied sandstone and dolomite cores was observed (where large amounts of gas can be accumulated, which is a major threat to mining excavations). In contrast, the available results for anhydrite and rock salt samples suggest that in the analysed area (despite the relatively poor collector properties of rocks), there are conditions for local gas traps in zones with increased porosity.
Źródło:
Nafta-Gaz; 2019, 75, 6; 314-323
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zmienność ilości i składu gazów pochodzących z degazacji rdzeni skalnych w profilu geologicznym otworu z obszaru LGOM
Variability of the amount and composition of gases from the rock cores degassing in the geological profile of the borehole from the LGOM area
Autorzy:
Kania, Małgorzata
Janiga, Marek
Wciślak, Agnieszka
Powiązania:
https://bibliotekanauki.pl/articles/1834131.pdf
Data publikacji:
2020
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
gaz desorbowany
gaz resztkowy
skład molekularny
właściwości petrofizyczne
profil geologiczny
LGOM
desorbed gas
residual gas
molecular composition
petrophysical properties
geological profile
Legnica-Głogów Copper District
Opis:
The main objective of the research was to determine the amount and chemical composition dependence of gases formed during the degassing process of lithologically and petrophysically varied rocks in reference to the geological profile of the borehole. In the case of copper-bearing formations, determining this type of regularity for different types of rocks will make it possible to predict places and directions of gas exhalation. This may contribute, in the future, to maintaining safety in mines. The subject of the research were rock samples from a selected vertical borehole within copper-bearing formation from the southern part of the Fore-Sudetic Monocline. The samples collected for testing represented the following lithological series: red and grey sandstone, dolomite, anhydrite and rock salt. In order to assess the gas-bearing capacity of rocks with different lithofacial structure, the molecular composition and the amount of desorbed and residual gases were tested within selected vertical well. In addition, all core samples were subjected to porosimetric and permeability tests to evaluate the basic petrophysical parameters. Based on the obtained results, it was found that the amount of evaporated residual gas in the whole area of the borehole profile correlates perfectly with petrophysical properties, and more specifically with the values of total porosity. Samples from the sandstone series (both red and grey sandstone) are characterized by the highest total porosity reaching almost 25% and in these rock pores, the largest amounts of residual gas were accumulated and closed. Slightly smaller amounts of gas were separated during the degassing process from the limestone dolomite sample, taken from the depth of 10.00 m with a relatively high total porosity of 7.3%, and even smaller from the depth of 8.35 m. The amount of residual gas for rock salt (Na1) and for anhydrite samples (A1d) remained significantly lower. Large amounts of gas separated from the pore space of cores during the degassing process are associated with a high content of excess nitrogen. The largest amounts were separated from a series of sandstones and from a sample of dolomite, taken from a depth of 10.00 m, i.e. from cores with high total porosity. Additionally, anomalously high values of excess nitrogen in desorbed gas were found in the anhydrite sample, taken from a depth of 52.00 m (with relatively low porosity). The presence of excess nitrogen in this sample can be explained by selective gas adsorption during long-distance migration, as well as the possibility of forming of local gas traps.
Źródło:
Nafta-Gaz; 2020, 76, 1; 3-11
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania przemieszczeń powierzchni spowodowanych wstrząsami górniczymi z zastosowaniem satelitarnej interferometrii radarowej na przykładzie LGOM
Analysis of surface displacements caused by mining tremors based on satellite radar interferometry, case study of the Legnica-Glogow Copper District
Autorzy:
Owczarz, Katarzyna
Blachowski, Jan
Powiązania:
https://bibliotekanauki.pl/articles/165871.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
sejsmika indukowana
satelitarna interferometria radarowa
przemieszczenia powierzchni
górnictwo
Legnicko-Głogowski Okręg Miedziowy (LGOM)
Polska
induced seismicity
satellite radar interferometry
surface displacements
mining
Legnica-Glogow Copper District
Polska
Opis:
W artykule przedstawiono wyniki obliczeń metodą satelitarnej interferometrii różnicowej (DInSAR) wykonanych dla trzech wstrząsów indukowanych, które wystąpiły na terenach górniczych LGOM. Wybrane do analiz zdarzenia miały magnitudy: 4.8, 4.5 oraz 3.9 i wystąpiły odpowiednio: 26.12.2017 r., 20.07.2018 r. oraz 12.08.2018 r. Do określania potencjalnych zmian na powierzchni w wyniku tych wstrząsów wykorzystano zobrazowania SAR zarejestrowane przez satelity Sentinel-1A i Sentinel-1B bezpośrednio przed i po wystąpieniu wstrząsów. Wyznaczono koherencję, opracowano interferogramy, a następnie wyznaczono przemieszczenia powierzchni w linii widoczności satelity (LOS). Dla wstrząsu o magnitudzie 4.8 obniżenia pionowe (LOS) wyniosły ponad 8 cm, a dla wstrząsu o magnitudzie 4.5 około 7 cm. Dla wstrząsu o najmniejszej magnitudzie nie zidentyfikowano wyraźnego obrazu deformacji na powierzchni. Wyniki posłużyły do analizy wielkości i zasięgu zmian na powierzchni powstałych w wyniku tych zdarzeń, a także do dyskusji na temat przydatności satelitarnej interferometrii radarowej do pozyskiwania wiarygodnych danych o deformacjach powierzchni powodowanych sejsmiką indukowaną działalnością górniczą.
This paper presents the results of calculations using the differential satellite radar interferometry (DInSAR) method made for three induced shocks that occurred in the LGOM mining areas. The events selected for the analysis had the magnitudes of 4.8, 4.5 and 3.9 and occurred on the 26.12.2017, 20.07.2018 and 12.08.2018 respectively. To identify potential changes on the surface as a result of these shocks, SAR imagery recorded by Sentinel -1A and Sentinel-1B satellites immediately before and after these events was used. In the calculation process: coherence was determined, interferograms were developed, and then surface displacements in the line of the sight (LOS) were determined. For the magnitude 4.8 the vertical movements (LOS) reached - 8 cm, and for a magnitude 4.5 event approx. - 7 cm. For the seismic event with the smallest magnitude deformation, the image could not be identified on the surface. The results were used to analyze the size and extent of changes on the surface resulting from these events, as well as to discuss the usefulness of the satellite radar interferometry method to obtain reliable data on deformations caused by mining induced seismicity.
Źródło:
Przegląd Górniczy; 2019, 75, 1; 53-61
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozwój metod rozpoznania warunków hydrogeologicznych na potrzeby wykonywania pionowych wyrobisk udostępniających złoże : przykład LGOM
Evolution of methods for hydrogeological condition recognition for the need of shaft sinking : an example from the Legnica-Głogów Copper District
Autorzy:
Chudy, K.
Worsa-Kozak, M.
Pikuła, M.
Powiązania:
https://bibliotekanauki.pl/articles/2075602.pdf
Data publikacji:
2017
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
LGOM
Legnicko-Głogowski Obszar Miedzionośny
warunki hydrogeologiczne
wskaźnik filtracji
pompowanie
wyrobisko szybowe
monoklina przedsudecka
Legnica-Głogów Copper District
hydrogeological conditions
hydraulic conductivity
pumping test
shaft sinking
Fore Sudetic Monocline
Opis:
The paper presents the review of methods for determining hydrogeological properties of rock mass in the place of mine shaft location. The largest Polish copper ore deposit is located in the Fore-Sudetic Monocline. It is the Kupferschiefer-type deposit occurring at a depth of 400 to 1200 metres. During the last 60 years the deposit was opened with 30 mine shafts, and the 31st shaft is currently being sunk. The methods of hydrogeological tests in boreholes as well as the methods of estimation of hydrogeological parameters and prediction of water inflow into the sinking mine shaft have evolved through the years. In the 1960s, the most popularfield test was the well bailing/infiltration test, and the most popular methods ofparameters estimation and inflow prognosis were analytical equations and analytical methods of water inflow forecasting. These methods provide very uncertain results. The best and reliable results of predicted water inflows are derived from methods based on long-term pumping tests and numerical modelling. These methods were used in the IMore project which concerns possibilities of dewatering of the Bundsandstein aquiferfor a mine shaft sinking purpose.
Źródło:
Przegląd Geologiczny; 2017, 65, 11/1; 1035--1043
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-4 z 4

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies