Temat: FE Analysis - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Numerical analysis of friction influence on the transverse welding phenomenon in the forward extrusion process
Autorzy:: Piwnik, J.
Mogielnicki, K.
Kuprianowicz, J.
Powiązania:: https://bibliotekanauki.pl/articles/279515.pdf
Data publikacji:: 2014
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: extrusion
welding criteria
FE analysis
Opis:: There is often a need to join billets being extruded in the forward extrusion processes in order to preserve the continuity of manufacturing of products. The primary problem connected with joining while extruding is to ensure the required state of stress, deformation and temperature assuring a good weld quality. The paper contains numerical analyses of the transverse joining processes of billets in the course of forward extruding. The impact of the friction between welded objects on the material flow in vicinity of the joints is analyzed. A numerical method for determination of the weld length at the longitudinal section, by assuming the homogeneity of the strain rate at both sides of the joined elements contact line, is proposed. Three cases of the forward extruding are analyzed. Two friction shear factors equal to m = 0.4 and m = 0.9 at the billets interface are modelled for each case and weld the lengths at the longitudinal sections are presented. In addition, distributions of the flowing material velocities and effective strains in the weld vicinity are added for all tested processes.
Źródło:: Journal of Theoretical and Applied Mechanics; 2014, 52, 2; 547-555
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Load carrying capacity numerical study of I-beam pillar structure with blast protective panel
Autorzy:: Mazurkiewicz, L.
Kolodziejczyk, D.
Damaziak, K.
Malachowski, J.
Klasztorny, M.
Baranowski, P.
Powiązania:: https://bibliotekanauki.pl/articles/202056.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: FE analysis
blast protection
stability study
Opis:: The paper presents numerical analyses aimed at preliminary assessment of the protective panel effectiveness, which task is to protect the elements of building structures against explosion. For the criterion of assessing the effectiveness of the panel the load capacity of the column made of steel I-beam was chosen. Ultimate force was determined by using advanced computational procedure, which consisted of four stages: preload, blast simulation, dynamic response and static analysis of deformed structure. Blast load was simulated using Lagrangian- Eulerian domain coupling. Results indicated that the application of the protective panel significantly reduces the plastic deformation of the structure.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2013, 61, 2; 451-457
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Analysis of a light caterpillar vehicle loaded with blast wave from detonated IED
Autorzy:: Barnat, W.
Niezgoda, T.
Panowicz, R.
Powiązania:: https://bibliotekanauki.pl/articles/247638.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: IED
vehicle shell
FE analysis
ground
Opis:: More and more impudent attacks on the military convoys in Afghanistan proved a huge danger of the improvised explosive devices - IED. Huger and more clever charges are a serious problem for vehicles protection. Additionally, hitherto defence standards and STANAG didn't predict such huge charges. Majority investigations were based on a 3 kg anti-tank mine. The article presents the results of numerical calculations for the elements of the combat vehicle supporting structure loaded with an impact generated by explosion of a huge explosive charge under the bottom of the vehicle with consideration of the wave reflected from the ground. Such an approach allows obtaining a good approximation of numerical simulations to real conditions of terroristic attacks. Additionally, the analysis of IED side influence on the vehicle shell was conducted. The explosive charge — IED — was simulated with the use of concentrated energy of properly selected (on the base of literature investigations) density and initial energy. During analyses of side explosive on the vehicle structure, the obstacle in the form of a building increasing the pressure impulse was taken into account. The paper presents the results of a numerical analysis in which Euler and Lagrange domains(describing a vehicle) were coupled. A perfect gas model was used to describe air parameters.. Additionally, the ground was described with a gas model. Every kind of material data were selected on the base of experimental investigations. A bilinear material model with a Cowper and Symonds strain rate model was used to describe a vehicle. Such an approach fully describes the phenomena occurring in the system.
Źródło:: Journal of KONES; 2010, 17, 4; 27-34
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: CI engine as a case study of thermomechanical FE analysis of the piston - piston rings - cylinder system
Autorzy:: Szurgott, P.
Niezgoda, T.
Powiązania:: https://bibliotekanauki.pl/articles/247997.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine piston
composite piston
thermomechanical analysis
FE analysis
Opis:: The compression-ignition engine as a case study of a methodology of the numerical modelling and simulation of the piston - piston rings - cylinder system was presented in the paper. Thermomechanical FE analysis, taking into account thermal and mechanical loads, was carried out using the MSC.Marc/Mentat software. The mechanical loads included loads due to inertial and gas forces as well. A three dimensional solid geometrical model of the considered set was developed using AutoCAD software, whereas the finite element mesh was generated using Altair HyperMesh. Kinematic boundary conditions - the vertical displacement and acceleration of the piston - were described by the corresponding curves as a function of time for selected engine speed. Changes in pressure on the piston crown were estimated based on data from the engine manufacturer and the corresponded indicator diagram available in the literature. The results of thermomechanical FE analysis were presented in the form of stress and/or displacement contours. The main aim of the analysis was to determine the deformation of the piston depending of on the piston material. Two types of material were compared - the actual one PA12 aluminum alloy and the new composite material with low hysteresis. The second material was characterized by slight differences of the coefficient of thermal expansion for heating and cooling.
Źródło:: Journal of KONES; 2012, 19, 1; 399-406
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Investigation of a panel with an elastomer layer plus carbon fibres loaded with a blast wave
Autorzy:: Barnat, W.
Niezgoda, T.
Gieleta, R.
Panowicz, R.
Powiązania:: https://bibliotekanauki.pl/articles/247636.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: blast wave
experiment
FE analysis
elastomer layer
Opis:: Terrorist attacks are directed against the most important elements of the infrastructure and human life. Crews of the combat vehicles as well as transmission installation of oil, gas and electric energy are, first of all, exposed to such operations. Such a situation caused striving to increase the safety against the activity of short-time loads coming from explosions [l, 2]. The object of the presented investigations was a numerical-experimental analysis of an elastomer layer of the protective panel combined with an experimental verification. Developed elastomer structures constitute perspective materials and will be applied to solve the problems connected with the increase of combat vehicle safety as well as trouble constructions of pipelines and gas pipelines especially in the dangerous places such as passages over rivers. A plate with an elastomer layer (with carbon fibres) loaded with a 100 g TNT charge was subjected to the analysis. The numerical analysis was verified experimentally. The results of the conducted analyses will be applied in further works on the selection of the kinds and parameters of the energy absorbing layers. They will be also used for further validating and optimizing investigations, which will aim at absorbing or dispersion of a maximum great value of energy influencing the energy absorbing panel. Such panels can be used for constructing armoured vehicles and protective elements of stationary strategic constructions. The constructions which can be exposed to damages resulted from a different kind of dynamic forces such as impacts or influences of the pressure wave comingfrom detonation of an explosive material should have the structure enabling absorption of as great as possible part of energy which influences them. Energy absorbing elements are constructed in the form of sandwich structures coats with a specially selected core material. One of the interesting types of materials which can be used for this purpose is elastomer. These materials enable significant increasing of the protective degree due to their capacities of absorbing energy of a blast wave. Applying of these materials results in decreasing of vibrations frequency of a system loaded with a pressure impulse.
Źródło:: Journal of KONES; 2010, 17, 4; 19-26
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Pullout capacity of cylindrical block embedded in sand
Autorzy:: Sternik, K.
Dołżyk-Szypcio, K.
Powiązania:: https://bibliotekanauki.pl/articles/178630.pdf
Data publikacji:: 2018
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: block anchors
pullout capacity
FE analysis
plastic limit analysis
Opis:: Calculation of pullout capacity of anchoring concrete cylindrical block by finite element method is carried out. 3D model of the block assumes its free rotation. Alternative solutions with one and two pulling forces attached at different heights of the block are considered. Dependency of the ultimate pulling force on the points of its application, the block’s embedment depth as well as contact friction are investigated. Results of FE analysis and simple engineering estimations are compared. The maximum pullout resistance results from FE analysis when the rotation of the block is prevented.
Źródło:: Studia Geotechnica et Mechanica; 2018, 40, 1; 30-37
0137-6365
2083-831X
Pojawia się w:: Studia Geotechnica et Mechanica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Analysis of a protective composite panel with energy adsorbent in the form of foamed aluminium
Autorzy:: Barnat, W.
Panowicz, R.
Niezgoda, T.
Gieleta, R.
Powiązania:: https://bibliotekanauki.pl/articles/247656.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: blast wave
analytical model
FE analysis
aluminium panel
Opis:: The article presents the results of the investigations into modelling a blast wave for huge charges of l kg TNT equivalent. Modelling of huge charges is a very interesting problem due to a scale effect. During numerical analyses a detonation phenomenon was ignored (for the reason of the analysis time). The paper considers the effects of the influence of a pressure wave coming from a huge TNT charge (modelled with energy) on a 6 mm thick steel plate as well as on a protective panel made of foamed aluminium with composite layer. A panel of foamed aluminium was used for the protection of the described plate. The particular elements of a panel, subjected to an experimental analysis, were jointed with the use of a glueing method. In the numerical model the particular component layers were jointed with contact. The ALE (Arbitrary-Lagrange-Euler) function was used for coupling between the Euler domain and the Lagrange domain. The method requires absolute location compatibility of the nodes from both jointed areas. In the results of the conducted investigations, the permanent deformation of the steel plate was obtained.. Additionally, the possibility of the steel plate deformation evaluation was considered on the basis of accessible literature. Due to a huge charge, the analysis was performed with the use of the finite element method with the eiperimental verification.
Źródło:: Journal of KONES; 2010, 17, 4; 35-44
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: The assessment of the influence of selected passive safety systems on the level of dynamic loads of soldiers during collision
Autorzy:: Hryciów, Z.
Powiązania:: https://bibliotekanauki.pl/articles/247170.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: armoured personnel carrier
impact
passive safety
dummy
FE analysis
Opis:: The work describes chosen problem connected with using of armoured personnel carriers (APC) in the frame of military operations. The soldiers inside the APC are exposed to dynamic loads and shock which are, among other things, an effect of collision with other vehicle or terrain obstacles. In military vehicles, which design is based on a rigid frame or integral body, there is no technical solution to mitigate the effects of a crash. The only applicable means of protection against the effects of collisions are lap belts and helmet designed to protect the head. Preliminary research shows that this kind of equipment is not sufficient. In the work an assessment of the influence of chosen solutions of safety belts and helmets on dynamic loads of carrier’s crew during collision with a rigid obstacle are presented. In simulation researches the HYBRID III dummies models have been used and calculations were carried out in LS-DYNA system. The work shows the numeric test results. Behaviour of the dummies during the impact on both the driver and crew member were presented. To assess a risk of injury standard indicators of crash test were used, including: maximum value of the head acceleration and the maximum values of the forces and moments in the neck. The distributions of these parameters were presented. The assessment of applied passive safety systems was made from the point of view of treat to soldiers inside a carrier.
Źródło:: Journal of KONES; 2013, 20, 3; 161-168
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Analysis of dynamic loads of the armoured personnel carrier crew during frontal crash
Autorzy:: Hryciów, Z.
Powiązania:: https://bibliotekanauki.pl/articles/241831.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: armoured personnel carrier
impact
passive safety
dummy
FE analysis
Opis:: The work describes chosen problem connected with using of armoured personnel carriers (APC) in the frame of stabilisation and peacekeeping mission. The new type of tasks appears: ramming obstacles such as fences, entry gates, light engineering obstacles and also pushing other vehicles aside the road in order to obtain trafficability. The main threat in such situation is a risk of serious injury of soldiers inside vehicle. The lack of a crumple zone increases a value of acceleration acting on the crew. In the work models of driver and crew member seats used in the APC were showed. To the tests a Hybrid III 50th male dummy model in a seated position were used, which is a good representation of the average population of men. To the modelling LS-DYNA software was applied. The work shows the numeric test results. Behaviour of the dummies during the impact on both the driver and crew member were presented. To assess a risk of injury standard indicators of crash test were used, including: maximum value of the head acceleration, the criterion HIC and the maximum values of the forces and moments in the neck. The distributions of these parameters were presented. Results of simulation indicated that velocity and location of dummies has large influence on levels of dynamic loads. To further research is proposed to take into consideration models of dummy with additional equipment of soldiers (e.g. a helmet, a weapon, a bullet-proof jacket).
Źródło:: Journal of KONES; 2012, 19, 4; 223-230
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Field test and numerical studies of the scissors-AVLB type bridge
Autorzy:: Krason, W.
Malachowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/201143.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: scissor-AVLB type bridge
experimental test
numerical FE analysis
Opis:: Scissor bridges are characterized by high mobility and modular structure. A single module-span consists of two spanning parts of the bridge; two main trucks and the support structure. Pin joints are used between modules of the single bridge span. Some aspects of the experimental test and numerical analysis of the scissor-AVLB type bridge operation are presented in this paper. Numerical analyses, presented here, were carried out for the scissors-type BLG bridge with treadways extended as compared to the classical bridge operated up to the present in the Armed Forces of the Republic of Poland. A structural modification of this kind considerably affects any changes in the effort of the force transmitting structure of the bridge. These changes may prove to be disadvantageous to the whole structure because of torsional moments that additionally load the treadways. Giving careful consideration to such operational instances has been highly appreciated because of the possibility of using this kind of bridges while organizing the crossing for vehicles featured with various wheel/track spaces (different from those used previously). The BLG bridge was numerically analysed to assess displacements and distributions of stresses throughout the bridge structure in different loading modes. Because of the complexity of the structure in question and simplifications assumed at the stage of constructing geometric and discrete models, the deformable 3D model of the scissors-type bridge needs verification. Verification of the reliability of models was performed by comparing deflections obtained in the different load modes that corresponded with tests performed on the test stand. It has been shown that the examined changes in conditions of loading the treadways of the bridge are of the greatest effect to the effort of the area of the joint which is attached to the girder bottom. Stress concentrations determined in the analysis are not hazardous to safe operation of the structure.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2014, 62, 1; 103-112
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Numerically predicted J-integral as a measure of crack driving force for steels 1.7147 and 1.4762
Autorzy:: Vukelic, G.
Brnic, J.
Powiązania:: https://bibliotekanauki.pl/articles/281147.pdf
Data publikacji:: 2017
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: crack
steel 1.7147
steel 1.4762
FE analysis
Opis:: Fracture behavior of two types of steel (1.4762 and 1.7147) is compared based on their numerically obtained J-integral values. The J-integral are chosen to quantify the crack driving force using the finite element (FE) stress analysis applied to single-edge notched bend (SENB) and compact tensile (CT) type fracture specimens. The resulting J-values are plotted for growing crack length (∆a – crack length extension) at different a/W ratios (a/W – relative crack length; 0.25, 0.5, 0.75). Slightly higher resulting values of the J-integral for 1.4762 than 1.7147 can be noticed. Also, higher a/W ratios correspond to lower J-integral values of the materials and vice versa. J-integral values obtained by using the FE model of the CT specimen give somewhat conservative results when compared with those obtained by the FE model of the SENB specimen.
Źródło:: Journal of Theoretical and Applied Mechanics; 2017, 55, 2; 659-666
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Numerical study of selected military vehicle chassis subjected to blast loading in terms of tire strength improving
Autorzy:: Baranowski, P.
Malachowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/199788.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: blast loading
LAV
tire
FE analysis
opona
analiza MES
Opis:: In the paper a chosen model of the light armoured vehicle was tested in terms of blast loading. More precisely, the blast propagation and interaction with the tire behaviour and suspension system elements of the light-armoured vehicle (LAV) was simulated. The chosen military vehicle meets the requirements of levels 2A and 2B of STANAG 4569 standard. Based on the obtained results, two modifications were proposed for the strength and resistance improvement of the wheel. The first consisted of inserting the rubber runflat ring inside the tire, whereas in the second the honeycomb-like composite wheel was implemented. Non-linear dynamic simulations were carried out using the explicit LS-Dyna code, with multi-material Arbitrary Lagrangian-Eulerian formulation for simulation the blast process.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2015, 63, 4; 867-878
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Dynamic testing of copper material : numerical approach
Autorzy:: Baranowski, P.
Małachowski, J.
Mazurkiewicz, Ł.
Damaziak, K.
Powiązania:: https://bibliotekanauki.pl/articles/387353.pdf
Data publikacji:: 2013
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:: miedź
sprężanie
analiza elementów skończonych
SHPB
copper
compression
FE analysis
Opis:: Split Hopkinson pressure bar (SHPB) is one of the most important and recognisable apparatus used for characterizing the dynamic behaviour of various materials. Incident pulse generated one the incident bar usually have a rectangular shape, which is proper for some materials but for others is not. Therefore, several methods of shaping the incident pulse are used for obtaining constant strain rate conditions during tests. Very often pulse shapers made of copper or similar material are implemented due to its softness properties. In this paper such material was investigated using the FE model of SHPB. Its mechanical behaviour was characterised with and without copper disc between the striker and incident bar. Numerical simulations were carried out using explicit LS-DYNA code. Two different methods were used for modelling the copper sample: typical finite Lagrangian elements and meshless Smoothed Particle Hydrodynamics (SPH) method. As a result of two techniques used axial stress-strain characteristics were compared for three different striker’s velocity with an influence of the copper pulse shaper taking into account. Finally, FE and SPH method was compared with taking into consideration: the efficiency, computer memory and power requirements, complexity of methods and time of simulation.
Źródło:: Acta Mechanica et Automatica; 2013, 7, 4; 195-202
1898-4088
2300-5319
Pojawia się w:: Acta Mechanica et Automatica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Experimental and numerical tests of separated side lock of intermodal wagon
Autorzy:: Barnat, W.
Krasoń, W.
Bogusz, P.
Stankiewicz, M.
Powiązania:: https://bibliotekanauki.pl/articles/246770.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: intermodal transport
railway wagon
strength test
FE analysis
Aramis
experiment
Opis:: The object of the paper is to investigate the strenght of a separated subsystem of a wagon for transport of trucks semitrailers. The wagon designed in the Department of Mechanics and Applied Computer Science, Military University of Technology, allows easy and independent loading, transport and unloading without any special equipment or additional platform infrastructure. It is possible to utilize it for transport of various vehicles types such as tractors, cars, semitrailers, containers, heavy equipment. The tests presented in the paper concern a wagon separated construction element – a side lock. It is a key subsystem of the platform allowing transfer of its loads generated in the transport position (a wagon ready to go) to the form of longitudinal forces operating in the sides of the structure. The locks are simultaneously the most strained parts of the wagon. There were carried out the numerical analyses and experimental studies of a single lock were carried out. Owing to the application of Aramis non-contact optical system of strains measurement, the lock deformations as well as the areas of the minimum and maximum main deformations were defined.
Źródło:: Journal of KONES; 2014, 21, 1; 15-22
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Thermomechanical FE analysis of the engine piston made of composite material with low histeresis
Autorzy:: Szurgott, P.
Niezgoda, T.
Powiązania:: https://bibliotekanauki.pl/articles/244407.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine piston
composite piston
coefficient of thermal expansion
thermal analysis
FE analysis
Opis:: The main purpose of the preliminary analyses presented in the paper was to compare the behaviour of the combustion engine piston made of different type of materials under thermal load. A thermomechanical FE analysis of the engine piston made of composite material was shown. A selected engine is installed in one of the popular polish tanks. The proposed new material is characterized by a low hysteresis – the differences of the coefficient of thermal expansion for heating and cooling are not significant. The results obtained for the piston made of a new material were compared with those for the current standard material. The piston was loaded by a temperature field inside it. Appropriate averaged thermal boundary conditions such as temperatures and heat fluxes were set on different surfaces of the FE model. FE analyses were carried out using MSC.Marc software. Development of the FE model was also presented. Geometrical CAD model of the piston was developed based on the actual engine piston, which was scanned using a 3D laser scanner. A cloud of points obtained from the scanner was processed and converted into a 3- dimensional solid model. FE model of a quarter part of the piston was developed for the preliminary analysis presented in the paper. 4-node tetrahedron finite elements were applied since there was no axial symmetry of the considered object. The temperature field inside the piston was determined and presented in the form of contour bands. Contours of displacement and stress in a radial direction were shown as well.
Źródło:: Journal of KONES; 2011, 18, 1; 645-650
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "FE Analysis" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język