Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kim, K." wg kryterium: Autor


Tytuł:
Analysis Of Drilling Of A Metal Plate With Pilot Hole
Analiza wiercenia metalowej płyty z otworem pilotującym
Autorzy:
Kim, K. S.
Powiązania:
https://bibliotekanauki.pl/articles/354541.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
finite element method
drilling
pilot hole
cutting force
plastic strain
metoda elementów skończonych
wiercenie
otwór pilotujący
siła cięcia
odkształcenie plastyczne
Opis:
This paper performed a numerical analysis study of the cutting characteristics when drilling a taper hole whose upper and lower diameters are different, that is, a pilot hole. 3-dimensional drilling analysis was performed using a commercial code, and these results were used to determine analytically and compare the cutting temperature, the phenomenon of cutting chip formation, deformation and pressure, etc., for the tools, chips, and specimens during cutting. Also, cutting force and the required energy were calculated and compared. To verify the results of analysis, a cutting dynamometer was used to analyze 3-axis cutting force. Results of analysis showed that the specimen maintained a temperature of approximately 650°, with rapid cooling after chips were formed from the specimen. The tool reached a maximum of 700°, similarly to the chips. It is expected that these results will be utilized to optimize cutting processes and work conditions when drilling holes.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1307-1310
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distribution and Management of the Invasive Exotic Species Ambrosia Trifida and Sicyos Angulatus in the Seoul Metropolitan Area
Autorzy:
Kim, K. D.
Powiązania:
https://bibliotekanauki.pl/articles/124560.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
Ambrosia trifida
exotic
invasive
management
Sicyos angulatus
spreading
urban ecosystem
Opis:
We investigated the status of invasive exotic plants disturbing the ecosystem of the Seoul metropolitan area and examined the management of such plants. We selected our study sites based on those used in previous studies and on information in databases. All flora were classified into 57 families and 211 species; we evaluated 253 plant communities. The representative, invasive exotic species were Sicyos angulatus, Lactuca scariola, Ambrosia trifida, Ambrosia artemisiifolia, and Eupatorium rugosum. Stands of A. trifida ranged in area from 214 to 16,882 m2 and were present in riparian zones, road and forest edges, slopes, and other open habitats at all sites, covering an average of 37.87% of all study areas. In Gwangju, Ansan, and Anyang cities and in Yeoncheon-gun, A. trifida coverage was >50%; the total mean coverage was near-continuous along the Han and the South Han rivers, broken only by cliffs in some riparian zones, and anthropogenic constructions. A. trifida and S. angulatus require careful management because of extensive growth, shading, and twining. The biodiversity of native species may be conserved by physical eradication of these plants. We describe the extents and distribution patterns of these two representative invasive exotic species in the enormous urban ecosystem of Seoul.
Źródło:
Journal of Ecological Engineering; 2017, 18, 5; 27-36
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An integrated framework for various operation plans in container terminals
Autorzy:
Won, S. H.
Kim, K. H.
Powiązania:
https://bibliotekanauki.pl/articles/258792.pdf
Data publikacji:
2009
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
container terminals
planning
resource capacity
Opis:
This study provides a framework for integrating various planning activities in container terminals. First, we introduce various planning activities in container terminals and identify decision-making problems for each planning activity. Input parameters, decision variables, objectives, constraints, time buckets, and the planning horizon for each decision activity are identified. Next, we introduce the concept of a resource profile and planning procedure simultaneously by considering availabilities of various resources and resource requirements in a planning activity.
Źródło:
Polish Maritime Research; 2009, 3; 51-61
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Property of Indium Tin Oxide (ITO) After Various Methods of Cleaning
Autorzy:
Kim, K.
Ihm, K.
Kim, B.
Powiązania:
https://bibliotekanauki.pl/articles/1401317.pdf
Data publikacji:
2015-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.20.-r
Opis:
We investigated the surface property change of indium tin oxide (ITO) with the various cleaning methods, using photoemission spectroscopy (PES), work function change and near-edge X-ray adsorption fine structure (NEXAFS). The detergent treatments of ITO with acetone (C₃H₆O), methanol (CH₄O), 2-propanol (C₃H₈O), and deionized (D) water yielded work function shifts as high as 0.99 eV compared to the no-treatment ITO. In contrast, work function shifts of 0.10-0.35 eV were measured after other treatments. The lowest C 1s concentration was obtained after O2 plasma treatment of ITO. There was no big change in the peak position and the shape of $In 3d^{5//2}$, and $Sn 3d^{5//2}$ after each treatment. But C 1s and O 1s spectra shows a peak shift and shape change. Presence of carbon can be minimized by NaOH treatment combined with oxygen plasma. In NEXAFS spectra of C K-edge on each sample, we found two π-binding states whose positions are 284.5 and 287.9 eV, C=C and C=O, respectively.
Źródło:
Acta Physica Polonica A; 2015, 127, 4; 1176-1179
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis Of The Extrusion Process Of A Square Tube Multi-Channel Heat Pipe
Analiza procesu wytłaczania wielokanałowych ciepłowodów o kwadratowym przekroju
Autorzy:
Kim, K. S.
Kim, J. Y.
Powiązania:
https://bibliotekanauki.pl/articles/353935.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum hot extrusion
FE simulation
stress analysis
extrusion experiment
aluminium wytłaczane na gorąco
symulacja FE
analiza naprężeń
wytłaczanie
Opis:
Heat pipes have been recently in use for cooling purposes in various fields, including electronic circuit boards and vehicle parts that generate large amounts of heat. In order to minimize the loss of heat transferred, there is a need to maximize the contact area of the working fluid. This study produced a square tube multi-channel heat pipe to replace the existing circular pipe type to maximize the internal surface area thereof. This expands the surface, allowing the working fluid to come into contact with a wider area and enhancing thermal radiation performance. A mold for the production for such a product was designed, and finite element simulation was performed to determine whether production is possible.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1463-1466
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Xenoxylon synecology and palaeoclimatic implications for the Mesozoic of Eurasia
Autorzy:
Oh, C.
Philippe, M.
Kim, K.
Powiązania:
https://bibliotekanauki.pl/articles/945484.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
paleontology
fossil wood
Xenoxylon
phytocoenosis
paleoecology
paleoclimate
Mesozoic
Eurasia
Opis:
The distribution of fossil wood genera has been demonstrated to be an effective proxy for Mesozoic terrestrial climates. In this study, we investigated the phytocoenoses, which were associated with Xenoxylon confirmed to be a marker for a cool and/or wet climate in a boreal hemisphere (i.e., Xenoxylon-phytocoenoses) during the Mesozoic, using specimens of fossil wood. It was confirmed that Xenoxylon co-occurs more often with some wood genera than with others. For example, Protocedroxylon, a wood that is most likely related to the Pinaceae, is the genus most often associated with Xenoxylon-phytocoenoses. Although Taxodioxylon is also found in Xenoxylon-phytocoenoses, it is not found, however, as consistently as Protocedroxylon. The distribution and diversity of Xenoxylon-phytocoenoses changed throughout the Mesozoic. During the Late Triassic and Late Cretaceous, Xenoxylon-phytocoenoses had low diversity and were restricted to higher palaeolatitudes during the Late Cretaceous. However, during the Early to Middle Jurassic, Xenoxylon-phytocoenoses were distributed much farther south, while their diversity concomitantly increased sharply. From the Late Jurassic to the Early Cretaceous, the distribution of Xenoxylon phytocoenoses moved northward in Europe and even more so in East Asia. The changes in the distribution of Xenoxylon-phytocoenoses are in agreement with changes in both global and regional climates. Our results also demonstrated that, within the Xenoxylon distribution range, the corresponding phytocoenoses were differentiated along a latitudinal gradient and according to the global climate change patterns during the Mesozoic.
Źródło:
Acta Palaeontologica Polonica; 2015, 60, 1; 245-256
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Electroless Ni–P Plating on the Bonding Strength of Bi–Te-Based Thermoelectric Modules
Autorzy:
Kim, S. S.
Son, I.
Kim, K. T.
Powiązania:
https://bibliotekanauki.pl/articles/356583.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermoelectric
Ni–P plating
bonding strength
Bi–Te
soldering
Opis:
In the present study, electroless Ni–P plating was applied to Bi–Te-based thermoelectric materials as a barrier layer and the effect of the Ni–P plating on the bonding strength of the thermoelectric module was investigated. The bonding strength of the n- and p-type modules increased after being subjected to the electroless Ni–P plating treatment. In the case of the thermoelectric module that was not subjected to electroless Ni–P plating, Sn and Te were interdiffused and formed a brittle Sn–Te-based metallic compound. The shearing mostly occurred on the bonding interface where such an intermetallic compound was formed. On the other hands, it was found from the FE-EPMA analysis of the bonding interface of thermoelectric module subjected to electroless Ni-P plating that the electroless Ni-P plating acted as an anti-diffusion layer, preventing the interdiffusion of Sn and Te. Therefore, by forming such an anti-diffusion layer on the surface of the Bi–Te based thermoelectric element, the bonding strength of the thermoelectric module could be increased.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1225-1229
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study of the local entropy generation rate in a porous media burner
Autorzy:
Mohammadi, I.
Esfahani, J. A.
Kim, K. C.
Powiązania:
https://bibliotekanauki.pl/articles/38597672.pdf
Data publikacji:
2020
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
porous media burner
chemical kinetics
volumetric heat transfer
axisymmetric combustion
local entropy generation
excess air ratio
Opis:
In this paper, the work and performance of the premixed methane-air porous axisymmetrical burner have firstly been simulated numerically using the CFD tools. For this purpose the set of governing equations has been enriched by an additional energy equation in porous solid, and the chemical species transport has been extended onto the multi-step mechanism (GRI-2-11). This numerical model has been verified on the base of available benchmark experiments. Next, we have studied the local entropy generation problem taking into account not only classical contributions like viscous and turbulent dissipation but also, the porous combustion of gases. The results showed that the greatest portion of entropy generation in the porous medium burner is related to chemical reactions, followed by heat transfer, mass diffusion (mixing) and friction (viscous dissipation), respectively. According to the results, as the excess air ratio increases, the local entropy generation rate due to heat transfer and friction increases and the local entropy generation rate due to chemical reactions is decreased. Also, by increasing the volumetric heat transfer coefficient, the local entropy generation rate due to heat transfer decreases and the local entropy generation rate due to friction and chemical reactions increases. Also, the local entropy generation rate due to mixing does not show a significant change with the changing excess air ratio and volumetric heat transfer coefficient.
Źródło:
Archives of Mechanics; 2020, 72, 3; 257-279
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Maritime traffic characteristics in waterway with time variant CPA
Autorzy:
Jeong, J.S.
Park, G.K.
Kim, K. I.
Powiązania:
https://bibliotekanauki.pl/articles/320550.pdf
Data publikacji:
2013
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
maritime traffic management
operation rate
risk assessment
collision
CPA
TCPA
Opis:
This paper aims at evaluating the collision risk between the encountering vessels under time- -variant CPA situations and then assessing the maritime traffic characteristics. Radar and AIS data are collected from Mokpo VTS in Korea. All crossing vessels that are navigating within CPA 1 miles of Mokpo-Gu waterway are analyzed. The maritime traffic characteristics is analyzed by surveying the distribution of CPA as a function of TCPA. To make it clear, the traffic operating rate in the Mokpo waterway is also computed. The averages of CPA and TCPA were observed until the encountered vessels pass safety each other after they come in a certain ship domain. As a consequence, the distribution of CPA as a function of TCPA gives a useful information to evaluate the maritime traffic safety.
Celem artykułu jest ocena ryzyka kolizji statków w funkcji zmiany wartości czasu do kolizji, a na tej podstawie oszacowanie charakterystyk determinujących ruch morski. Dane z radarów oraz systemu AIS zostały zarejestrowane w systemie VTS Mokpo w Korei. Przeanalizowano wszystkie przypadki przecinania się tras statków na podejściu do Mokpo-Gu w przypadku, gdy odległość minimalna (CPA) była mniejsza niż jedna mila morska. Charakterystyka ruchu morskiego opisana została poprzez wyznaczenie rozkładu wartości największego zbliżenia statków jako funkcji czasu do nadmiernego zbliżenia (TCPA). Dla pełnej jasności obliczono również współczynnik przepustowości drogi wodnej Mokpo. Opisano średnie wartości odległości największego zbliżenia oraz czasu do wystąpienia CPA bez względu na przekroczenia granic domeny obserwowanych statków. W konsekwencji wyznaczono rozkład wartości CPA jako funkcję TCPA, co okazuje się użyteczne dla oceny bezpieczeństwa ruchu morskiego.
Źródło:
Annual of Navigation; 2013, 20; 49-58
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A mixed control chart adapted to the truncated life test based on the Weibull distribution
Autorzy:
Khan, N.
Aslam, M.
Kim, K.-J.
Jun, C. -H.
Powiązania:
https://bibliotekanauki.pl/articles/406432.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
life test
Weibull distribution
attribute chart
binomial distribution
average run length
Opis:
The design of a new mixed attribute control chart adapted to a truncated life test has been pre-sented. It was assumed that the lifetime of a product follows the Weibull distribution and the number of failures was observed using a truncated life test, where the test duration was specified as a fraction of the mean lifespan. The proposed control chart consists of two pairs of control limits based on a binomial distribution and one lower bound. The average run length of the chart was determined for various levels of shift constants and specified parameters. The efficiency of the chart is compared with an existing control chart in terms of the average run length. The application of the proposed chart is discussed with the aid of a simulation study.
Źródło:
Operations Research and Decisions; 2017, 27, 1; 43-55
2081-8858
2391-6060
Pojawia się w:
Operations Research and Decisions
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Systematic Procedure for Modeling Usability Based on Product Design Variables: A Case Study in Audiovisual Consumer Electronic Products
Autorzy:
Kim, K.-J.
Han, S. H.
Yun, M. H.
Kwahk, J.
Powiązania:
https://bibliotekanauki.pl/articles/90811.pdf
Data publikacji:
2002
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
usability evaluation
human interface elements
consumer electronic products
produkty przemysłowe
ocena zgodności wyrobów
ocena użyteczności
produkty elektroniczne
Opis:
A systematic modeling approach to describing, prescribing, and predicting usability of a product has been presented. Given the evaluation results of the usability dimension (UD) and the measurement of the product’s design variables, referred to as the human interface elements (HIEs), the approach enables one to systematically assess the relationship between the UD and HIEs. The assessed relationship is called a usability model. Once built, such a usability model can relate, in a quantitative manner, the HIEs directly to the UDs, and thus can serve as an effective aid to designers by evaluating and predicting the usability of an existing or hypothetical product. A usability model for elegance of audiovisual consumer electronic products has been demonstrated.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2002, 8, 3; 387-406
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Loading Time of a Load Plate and Sample Size on the Measurement of Physical Properties of Resilient Materials
Autorzy:
Kim, K.-W.
Yeon, J.-O.
Yang, K.-S.
Kim, M.-J.
Powiązania:
https://bibliotekanauki.pl/articles/178069.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
resilient materials
dynamic stiffness
compressibility
long-term deformation
Opis:
This study investigates several factors that have not been specified in the standard for dynamic stiffness, compressibility, and long-term deformation; these factors can be used to evaluate the acoustic and physical performances of resilient materials. The study is intended to provide basic data for deriving the factors that need to be additionally reviewed through the standards. Since magnitude of dynamic stiffness changes with an increase in loading time, it is necessary to examine the setting of the loading time for a load plate under test conditions. Samples of size 300×300 mm, rather than 200×200 mm, yielded more reliable results for compressibility measurement. Since the test to infer long-term deformation of resilient materials after a period of 10 years in some samples showed variation characteristics different from those specified in the standards, it is recommended that the test method should be reviewed through ongoing research.
Źródło:
Archives of Acoustics; 2015, 40, 2; 159-167
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects Of Environmental Factors On The Dispersion Behavior Of Iron Oxide In Aqueous Solutions With Poly Acrylic Acid
Wpływ parametrów charakteryzujących wodne roztwory poli(kwasu akrylowego) na dyspersję tlenku żelaza
Autorzy:
Lee, E.-H.
Kim, K.-M.
Maeng, W.-Y.
Hur, D.-H.
Powiązania:
https://bibliotekanauki.pl/articles/354513.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
polyacrylic acid
dispersion stability
magnetite
nanoparticles
suspension
poli(kwas akrylowy)
stabilność dyspersji
magnetyt
nanocząstki
zawiesina
Opis:
After preparing aqueous suspensions from magnetite particles with a poly-acrylic acid, we investigated the effects of several experimental parameters. We characterized the stability of the suspensions using visual inspection, sedimentation, adsorption, and thermal stability of the dispersant. The dispersion stability is affected by the solution pH, the concentrations of magnetite particles, the molecular weight, the concentration of the dispersants, and the temperature. The stability of the suspensions increased as the concentration of the dispersant and the temperature increased. In terms of the molecular weights of the dispersant, the suspensions with dispersant of low-molecular weight (1800) were more stable than those of high-molecular weight (250000) at room temperature. However, at high temperature the suspensions with high-molecular weight showed stability. The adsorption efficiency of the dispersant was very low. The dispersant of high-molecular weight showed a higher thermal integrity than that of low-molecular weight. From this work, we obtained the optimum conditions for stable aqueous suspensions of magnetite particles.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1561-1564
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation Of Fine Grained SiC At Reduced Temperature By Two-Step Sintering
Wytwarzanie drobnoziarnistego SiC w obniżonej temperaturze przez dwuetapowe spiekanie
Autorzy:
Kim, K.-W.
Oh, K.-S.
Lee, H.
Kim, B. S.
Chung, T.-J.
Powiązania:
https://bibliotekanauki.pl/articles/353772.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
SiC
liquid phase
two step sintering
coarsening
hardness
faza ciekła
spiekanie dwuetapowe
odporność
twardość
Opis:
Two-step sintering route was applied for the densification SiC by promoting the role of liquid phase. The specimen contained 8 vol% of liquid phase composed of Al2O3 and Y2O3. The heating schedule consisted with initial rapid heating to 2000°C and immediate quenching to 1700 or 1750°C. By heating at elevated temperature, even distribution of the liquid phase was intended. The heat treatment at reduced temperature was to suppress the evaporative loss of the liquid and to secure the time for densification. The two-step sintering effectively suppressed loss of mass and coarsening. The resultant SiC was thus dense and was composed of fine grains exhibiting hardness of 2321 kgf/mm2.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1539-1542
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Characterization of Metallic Fuel Slugs Prepared by Modified Injection Casting
Autorzy:
Mun, S.-U.
Kim, K.-H.
Oh, S.-J.
Park, J.-Y.
Hong, S.-I.
Powiązania:
https://bibliotekanauki.pl/articles/351428.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sodium-cooled fast reactor
metallic fuel slug
U-Zr alloy
surface characterization
injection casting
Opis:
Metallic fuel slugs containing rare-earth (RE) elements have high reactivity with quartz (SiO2) molds, and a reaction layer with a considerable thickness is formed at the surface of metallic fuel slugs. The surface characterization of metallic fuel slugs is essential for safety while operating a fast reactor at elevated temperature. Hence, it is necessary to evaluate the surface characteristics of the fuel slugs so that chemical interaction between fuel slug and cladding can be minimized in the reactor. When the Si element causes a eutectic reaction with the cladding, it deteriorates the metallic fuel slugs. Thus, it is necessary to examine the characteristics of the surface reaction layer to prevent the reaction of the metallic fuel slugs. In this study, we investigated the metallurgical characteristics of the surface reaction layer of fabricated U-10wt.%Zr-Xwt.%RE (X = 0, 5, 10) fuel slugs using injection casting. The results showed that the thickness of the surface reaction layer increased as the RE content of the metallic fuel slugs increased. The surface reaction layer of the metallic fuel slug was mainly formed by RE, Zr and the Si, which diffused in the quartz mold.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1049-1053
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies