- Tytuł:
- Scale effect of cement mortar specimens subjected to high temperatures using uniaxial compressive and splitting tensile tests
- Autorzy:
-
Xiong, L. X.
Zhang, X. J.
Xu, Z. Y.
Geng, D. X. - Powiązania:
- https://bibliotekanauki.pl/articles/230921.pdf
- Data publikacji:
- 2020
- Wydawca:
- Polska Akademia Nauk. Czytelnia Czasopism PAN
- Tematy:
-
zaprawa cementowa
temperatura wysoka
ściskanie jednoosiowe
rozciąganie przy rozłupywaniu
efekt skali
cement mortar
high temperature
uniaxial compression
splitting tensile
scale effect - Opis:
- In this study, cubic and cylindrical cement mortar specimens were first subjected to high temperatures, then the cubic and cylindrical specimens were taken out and conducted with uniaxial compressive test and splitting tensile test, respectively. The effect of the length to side ratio on the uniaxial compressive properties and the effect of thickness-to-diameter ratio on the splitting tensile properties of cement mortar specimens after high temperature were studied. Test results show that: (1) With temperature increasing from 25 ºC (room temperature) to 400 ºC, the compressive strength and elastic modulus of cubic specimens with three kinds of side lengths decrease; the decreasing rates of compressive strength and elastic modulus of cubic specimen with side length of 70.7 mm is higher than those of cubic specimens with side length of 100 mm and 150 mm, and the strain at the peak stress of cubic specimens with three kinds of side lengths increase. (2) After the same temperature, the tensile strength of cylindrical specimen decreases with the thickness-to-diameter ratio increasing from 0.5 to 1.0. The decreasing rate of tensile strength of cylindrical specimen with thickness-to-diameter ratio is highest when the temperature is 25 ºC (room temperature), followed by that after the temperature of 200 ºC, and that after the temperature of 400 ºC is the lowest.
- Źródło:
-
Archives of Civil Engineering; 2020, 66, 3; 139-155
1230-2945 - Pojawia się w:
- Archives of Civil Engineering
- Dostawca treści:
- Biblioteka Nauki
Artykuł