Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Xie, S" wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Adsorption behavior of surfactants on lignite particles with different densities in aqueous medium
Autorzy:
Wang, J.
He, Y.
Wen, B.
Ling, X.
Xie, W.
Wang, S.
Powiązania:
https://bibliotekanauki.pl/articles/110538.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
interfacial surface free energy
adsorption
lignite
surfactant
Washburn equation
Opis:
Lignite is well known for its strong hydrophilicity and hard-to-float properties. However, the surface free energy of the solid is made up of two components, that is the Lifshitz-van der Waals and acid-base interaction energy. Differences in these two components between the low ash (lower density) and high ash fraction (higher density) provide a benefit for improving the separation efficiency through introducing surfactants in flotation. In this paper, thermodynamic characterization of three density lignite fractions was measured by a Washburn dynamic method. Combining the Washburn equation and Van Oss-Chaudhury-Good theory, the surface free energy components of three samples were calculated according to the wetting process by n-hexane, diiodomethane, deionized water and ethylene glycol. The Lifshitz-van der Waals part of surface free energy reduced with the coal density increase, especially between fractions of -1.45 g/cm3 and 1.45-1.80 g/cm3, while the Lewis base part increased slightly. The interfacial interaction free energies between the surfactant and lignite in aqueous medium indicated that the low hydrophilic index benefited for the stronger adsorption intensity. Increase of the surfactant Lifshitz-van der Waals component increases the adsorptive intensity on lower density lignite and the repulsive intensity on higher density lignite, which is beneficial for separation.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 996-1008
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Design and the First Test Results of a Fast LTD Stage
Autorzy:
Chen, L.
Zhou, L.
Zou, W.
Ren, J.
Li, Y.
Wu, S.
Xie, W.
Feng, S.
Deng, J.
Powiązania:
https://bibliotekanauki.pl/articles/1807988.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
84.70.+p
52.75.Kq
84.60.Ve
Opis:
Linear transformer driver stages are designed to be used as a primary energy storage in high power pulsed generators. In this report, the design and test results of the linear transformer driver stage prototype that delivers ≈100 kA fast pulse with 133 ns FWHM into a ≈0.87 Ω resistive load are described. This stage consists of 20 (100 kV, 20 nF) storage capacitors that are arranged in 10 identical bricks located evenly around the axis of the stage. Each brick contains two capacitors, a multi-gap switch, and the output connector that transfers the energy to the resistive load. The outer diameter of the stage is ≈1.5 m, at a length of ≈20 cm. The stage is developed to demonstrate the possibility of the fast linear transformer driver technology to create high power pulsed generators.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 1186-1188
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Response of energy-size reduction to the control of circulating load in vertical spindle pulverizer
Autorzy:
Li, H.
He, Y.
Zhang, Y.
Ge, Z.
Xie, W.
Wang, S.
Li, K.
Powiązania:
https://bibliotekanauki.pl/articles/110803.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
circulating load control
response of energy-size reduction
mixture grinding
energy efficiency
Opis:
In the vertical spindle pulverizer (VSP), the large circulation ratio and high ash and sulfur contents in circulating load would result in intensive energy consumption and low grinding efficiency. Although the control of circulating load would help increase the energy efficiency, no quantitative study has been conducted due to the high temperature and pressure in the closed VSP. In this study, response of energy-size reduction to the control of circulating load was studied by the experimental simulation method. Coal mixtures with fine/coarse ratio of 11:1, 8:1 and 6:1 were ground by a lab-scale roller mill. Energy-size reductions of the coarse coal were compared to evaluate the influence of circulating load control. Results showed that the product with the coarse coal increased by 30% when the specific breakage energy was 1.0 kWht–1 as the circulation ratio decreased from 11 to 6. Meanwhile, a breakage characteristic index of the coarse coal was two times higher due to the cushioning effect of fines. Besides, decrease of circulation ratio led to increase of the breakage rate of coarse coal, and the energy saving improved by 57%. With the same energy input of 2.0 kWht-1, the yield of –0.09 mm pulverized fuel (PF) increased from 22 to 43%. Therefore, controlling the circulating load is an effective method to improve the breakage rate of coarse coal and energy efficiency for PF generation.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 793-801
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies