Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Janicka, R." wg kryterium: Autor


Wyświetlanie 1-4 z 4
Tytuł:
Contour of vibroacoustic map in diagnoses of engines failure
Autorzy:
Kaźmierczak, A.
Janicka, A.
Tkaczyk, M.
Wróbel, R.
Powiązania:
https://bibliotekanauki.pl/articles/242382.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
vibroacustic maps
digital processing
automotive diagnosis
vibroacustic analysis
Opis:
Almost all engine failures have an influence on engine's vibration, which is described in the article .Of course not every time diagnostic system can report of that. This is a reason why detection of vibrations must be accomplished with high quality diagnostic systems. Therefore, Doppler laser Vibrometry based on scanner Polytec had been used. To achieve full diagnostic results multidimensional vibration's function has been invented, where the torque moment is used as an extra parameter. Measured vibrations were subjected to digital signal processing like windowing, fast Fourier transform, filtration byfinite impulse response windowed filters. The results of measure and processing per-form inform of contour 3 D plots, which indulge in speed estimate of the usefulness of presented method. Tested engine performance, vibration measurement parameters, adopted diagnostic circuit, Digital processing of vibration signal, Vibration versus torque and magnitude spectrum (contour vibroacoustic map) of engine in good working order; co = 2000 rpm, contour vibroacoustic map of engine in good working order; co = 4000 rpm, contour vibroacoustic map of engine with fail of injection system; co = 2000 rpm, contour vibroacoustic map of engine with fail of injection system; co = 4000 rpm, contour vibroacoustic map of engine withfail of turbo charger; co = 2000 rpm are presented in the paper.
Źródło:
Journal of KONES; 2009, 16, 2; 217-224
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Conditioning of a biomass gasification product gases for supplying a combustion engine
Kondycjonowanie gazów podawanych do silnika spalinowego powstałych w procesie zgazowania biomasy
Autorzy:
Górniak, A.
Janicka, A.
Skrętowicz, M.
Trzmiel, K.
Włostowski, R.
Wróbel, R.
Zawiślak, M.
Powiązania:
https://bibliotekanauki.pl/articles/132928.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
biomass gasification
SNG
gas conditioning
zgazowanie biomasy
syngaz
kondycjonowanie gazów
Opis:
The consequence of biomass gasification is generation of a gas mixture composed mainly of hydrogen, carbon mono and dioxide, and methane, called SNG (Substitute Natural Gas) which can be utilized as an alternative fuel for internal combustion engines. However, the product gas mixture cannot be directly supplied to the engine due to variability of its composition as well as its impurities. This brings the necessity to conduct a series of procedures of gas purification and conditioning before supplying the engine. This paper therefore deliberates a concept of gas conditioning method.
W wyniku procesów zgazowania biomasy powstaje mieszanina gazów składająca się między innymi z wodoru, tlenu węgla, ditlenku węgla i metanu, tzw. syngaz, który może zostać wykorzystany jako paliwo alternatywne do silnika spalinowego. Powstały syngaz, ze względu na swój skład (występowanie zanieczyszczeń) i parametry nie może być jedna podany do silnika w sposób bezpośredni. Niezbędne jest więc przeprowadzenie szeregu zabiegów kondycjonowania i oczyszczania gazu syntetycznego. W pracy przedstawiono koncepcję i metody kondycjonowania gazów.
Źródło:
Combustion Engines; 2015, 54, 3; 816-820
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The chemical properties of alternatiye fuel from Automobile Shredder Residue (ARS)
Autorzy:
Sobianowska-Turek, A.
Janicka, A.
Kolanek, Cz.
Wróbel, R.
Tkaczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/242323.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
Automobile Shredder Residue (ARS
end-of-life vehicles
Opis:
A technical object is wearing down and stop s to do its function what is connected with becoming a problem, in case of vehicles, especially in environmental aspect. The recycling rate of end-of-life vehicles (ELVs) has to increase to eighty-five per cent to 2014. Nowadays few methods of recycling can be mentioned. The most popular based on disassembly, second usage of recovered materials trough fragmentation and separation of raw materials and incineration of Automobile Shredder Residue (ARS) using maximum energy recovering and minimum emission causing processes. In this paper the methods of vehicle recycling was analyzed and discussed. Especially raw materials separation aspect was taken into consideration. An average sample of ARS which is a composition of materials like rubber, plastic, wood and fibers which is use as an alternative fuel for co-burning process in industry, was analyzed. Because of metals and organic compounds (PAHs - Polycyclic Aromatic Hydrocarbons, VOC's - Volatile Organic Compounds) toxic emission problem (combustion gas emission and waste emission with cinder) in ecology aspect it is very important to know chemical properties of burning fuel. The ARS very often consist potential hazardous on human health chemical compounds or compounds whose thermal treatment products are toxic. Even if concentration of potential dangerous compound is very low it can cause very serious consequences for environment and humans. The results of chemical properties investigation of alternative fuel from vehicle using AAS (Atomic Absorption Spectrophotometry) method are published in this paper. Also alternative solutions for those wastes (ARS) usage are proposed and discussed.
Źródło:
Journal of KONES; 2009, 16, 2; 413-419
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exposure of the Driver Staying Inside the Car Cabin to Volatile Organic Compounds
Ekspozycja kierowcy przebywającego wewnątrz kabiny nowego pojazdu na lotne związki organiczne
Autorzy:
Janicka, A.
Michniewicz, D.
Skrętowicz, M.
Trzmiel, K.
Wróbel, R.
Zawiślak, M.
Powiązania:
https://bibliotekanauki.pl/articles/389554.pdf
Data publikacji:
2016
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
car vehicle interior
indoor air quality
volatile organic compounds
wnętrze kabiny pojazdu
jakość powietrza wewnętrznego
lotne związki organiczne
Opis:
Nowadays the motorization is one of the basic branch of industry. Dynamic development of the – transportation sector has very positive impact on the social and civilization benefits, but on the other side, it generates also a lot of problems, especially related to the people health and life. The road transport is one of the main air pollution source, particularly in the cities. Furthermore, the motorization development caused increased in residence time inside vehicles. In the cities the traffic intensity is significantly higher than in the rural areas. This is the reason why road congestions are created. Exhausts, including hazardous volatile organic compounds, can easily penetrate into the cabin in the road congestion situation and they are the serious danger to the drivers and passengers. In the new cars, additional sources of volatile organic compounds are elements of the cabin interior. In this paper the results of the research on volatile organic compounds concentration inside passenger car in simulated conditions were presented. Additionally, the main sources of volatile organic compounds inside the car cabin were identify and the evaluation of driver exposure was defined.
W obecnych czasach motoryzacja stanowi jedną z głównych gałęzi przemysłowych. Dynamiczny rozwój motoryzacji, poza wieloma walorami społecznymi i cywilizacyjnymi, jest powodem licznych problemów, przekładających się w mniejszym lub większym stopniu na zdrowie i życie ludzi. Transport jest jednym z głównych źródeł emisji zanieczyszczeń do powietrza, szczególnie w aglomeracjach miejskich. Co więcej, rozwój motoryzacji sprawia również, że ludzie spędzają w samochodach coraz więcej czasu. W warunkach miejskich natężenie ruchu jest znacznie wyższe niż poza miastem. Często powstają zatory drogowe. Spaliny, których składnikami są również lotne związki organiczne, dostając się do wnętrza pojazdów uczestniczących w zatorze drogowym, stanowią poważne zagrożenie dla kierowców tych pojazdów oraz ich pasażerów. W nowych pojazdach dodatkowym źródłem lotnych związków organicznych mogą być elementy wyposażenia wnętrza kabiny. W pracy przedstawiono wyniki badań stężeń lotnych związków organicznych wewnątrz kabiny nowego, eksploatowanego samochodu osobowego. Zidentyfikowano również źródła lotnych związków organicznych znajdujących się wewnątrz pojazdu oraz dokonano oceny narażenia kierowcy.
Źródło:
Ecological Chemistry and Engineering. A; 2016, 23, 2; 139-145
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-4 z 4

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies