Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wcisło, A." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Influenceof Perkins 1104D-44TA motor powered with SME supply on the CO, NOx, THC and O2 emissions
Autorzy:
Wcisło, G.
Kurczyński, D.
Łagowski, P.
Pracuch, B.
Leśniak, A.
Tomyuk, V.
Powiązania:
https://bibliotekanauki.pl/articles/411145.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
combustion engine
biofuels
methyl esters of sunflower oil SME
external speed characteristics
Opis:
The paper presents the results of research on the impact of Perkins 1104D-44TA engine powered with sunflower oil methyl esters and, for comparison, with diesel fuel, in terms of emission of CO, THC, NOx and O2. The tests were carried out on the engine test stand. During the tests, the engine worked according to the external speed characteristics in the range from 1000 to 2200 rpm. The esters used for powering the tested engine were produced using the GW 200 reactor designed and made by Grzegorz Wcisło, one of the co-authors of the paper. The results of the tests carried out showed a decrease in the concentration of carbon monoxide in the exhaust gases, hydrocarbons when powering the engine with sunflower oil esters in relation to powering the engine with diesel fuel. At the same time, the concentration of nitrogen oxides and oxygen in the exhaust gases increased. The reduction of THC and CO emissions is the result of better combustion and afterburning of fuel. However, the increase in the amount of oxygen in the exhaust gases results from the fact that in the biofuel structure there is oxygen which is used in combustion and reduces the oxygen demand from the atmosphere. On the other hand, the increase in NOx emissions is the result of a higher combustion temperature than when the engine is powered by diesel fuel.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2018, 7, 4; 49-52
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the SME run Perkins 1104D-44TA engine on the power and torque as well as unitary and hourly fuelconsumption
Autorzy:
Łagowski, P.
Kurczyński, D.
Wcisło, G.
Pracuch, B.
Leśniak, A.
Tomyuk, V.
Powiązania:
https://bibliotekanauki.pl/articles/410954.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
combustion engine
biofuels
methyl esters of sunflower oil
external speed characteristics
Opis:
The article presents the results of tests determining the impact of using sunflower oil methyl esters on power and torque as well as unitary and hourly fuel consumption of the Perkins 1104D-44TA engine. Biofuels were produced in the Fuel and Energy Laboratory belonging to the Maopolskie Centrum Energii Odnawialnej (Małopolskie Center for Renewable Energy Sources), while analyzes of the selected fuel parameters were performed both in the above-mentioned laboratory and in the Liquid Biofuels Laboratory at the University of Agriculture in Krakow. Engine tests were carried out on the engine test stand at the Kielce University of Technology. During the tests, the engine worked according to the external speed characteristic. The results of the tests have shown that the engine supplied with the SME achieves slightly lower values of both power and torque than in the case of commercial fuel oil type Ekodiesel Ultra from the ORLEN S.A company. There was also an increase, especially in the case of higher unitary fuel consumption. Hourly fuel consumption was higher when supplied with SME in relation to the diesel fuel supply, although not as much as unitary consumption. The increase in SME consumption at the engine supply can be explained by the lower fuel value of SME, which contains oxygen in its structure.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2018, 7, 4; 49-52
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determining the effect of the addition of temperature on the rheological properties of biofuels FAME and RME
Autorzy:
Wcisło, G.
Pracuch, B.
Łagowski, P.
Kurczyński, D.
Leśniak, A.
Tomyuk, V.
Powiązania:
https://bibliotekanauki.pl/articles/411023.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
Biodiesel
FAME - Fatty Acid Methyl Esters
RME - Rapeseed Methyl Esters
diesel engine
dynamic viscosity
shearing rate
biofuel mix tur
Opis:
The aim of the study was to compare the impact of dynamic viscosity of two biofuels. One was a mixture of 50% (m / m) SBME and 50% (m / m) RME of own production. The mixture was conventionally called FAME. The second biofuel was commercial RME from a gas station. Dynamic viscosity as a function of temperature from -20 to 50oC was tested. The main device used at the measuring stand was ReolabQC rheometer manufactured by a German Anton Paar GmbH company. Dynamic viscosity especially grew rapidly after cooling biofuels to temperatures below -5°C. Dynamic viscosity FAME biofuels produced from pure vegetable oil (soybean oil and rapeseed oil) in a temperature range of 50 to -20°C has a value of c.a. 9 to 53[mPa∙s]. Dynamic viscosity of Biofuel FAME produced from mixtures of vegetable oils it was on average lower by about 1 to 8 [mPa∙s] of RME shopping from a gas station.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2019, 8, 4; 3-7
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies