Autor: Wojtas, M. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Proces certyfikacji podzespołów statku powietrznego na przykładzie
Certification process of aircraft`s subassemblies based on strenght tests of innovative gyroplane rotor hub
Autorzy:: Sobieszek, A.
Wojtas, M.
Powiązania:: https://bibliotekanauki.pl/articles/213445.pdf
Data publikacji:: 2015
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:: głowica wiatrakowa
CS 27
przepisy lotnicze
badania wytrzymałościowe
gyroplane rotor hub
aviation regulations
strength tests
Opis:: W artykule przedstawiono proces przygotowawczy certyfikacji, metodologie i przebieg badań weryfikujących podstawowe założenia konstrukcji lotniczej na przykładzie innowacyjnej głowicy wiatrakowca. Przeprowadzono badania czterołopatowej głowicy wiatrakowca weryfikujące wytrzymałość statyczną przy obciążeniach dopuszczalnych, określonych przez siły występujące przy manewrze wyrwania. Scharakteryzowano przebieg badań, metody badawcze oraz weryfikowane parametry. Opisano aspekty prawne dopuszczenia do lotu oraz uzyskania certyfikatu uwzględniając przepisy CS 27, podczęść C - Badania Wytrzymałościowe, według których prowadzono badania. Przedstawione wyniki i wnioski były podstawą do dopuszczenia obiektu do prób w locie przez Urząd Lotnictwa Cywilnego.
This paper describe the preparatory process of certification, methodology and tests which verify the assumptions of aeronautical construction based on innovative gyroplane rotor hub. Presented legal aspects of admission to the flight tests and the Type Certification (TC) taking into account legislation (CS 27 Subpart C - Strength Requirements). In this paper presented tests of innovative four - rotor blades rotor hub which verify static strength up to limit loads. The loads during "pull-up from level flight" maneuver are limit loads. Discussed are tests process, methodology of tests and verified parameters. The results and conclusions were the basis the admission object for flight testing by the Civil Aviation Authority.
Źródło:: Prace Instytutu Lotnictwa; 2015, 4 (241); 73-86
0509-6669
2300-5408
Pojawia się w:: Prace Instytutu Lotnictwa
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Composite rotor blades tests essential before mounting on gyroplane
Autorzy:: Sobieszek, A.
Wojtas, M.
Powiązania:: https://bibliotekanauki.pl/articles/242636.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gyroplane
strength test
blades properties
composites
Opis:: The article presents the course of the composite rotor blades tests. Object of study was designed in Institute of Aviation, new airfoil for gyroplane rotors and technology of manufacturing carbon rotor blades were made. When the test program was developed, we focused for special test to check not only typical rotor blades properties but also composite structures thereby technology of manufacturing. One of the basic rotor blades test is to determine the breaking force, which, taking into account the safety factor, cannot exceed the maximum centrifugal force occurring on the rotor blades during flight. The first step of rotor blades tests was static test, which gave us answer about stiffness in plane of low stiffness and torsional stiffness, it’s very important properties related to vibrations. Another mechanical properties measured during tests were centre of gravity and mass moment of inertia in rotor blade. Next step was dynamic test – tracking and balancing verification. After static and dynamics, which has proper results – good balance and no vibration on the entire range of rotational speed – rotor blades can be use on fly object. After getting proper results of static and dynamic test next step was a specially prepared test, which defined the time needed for delamination to take place. During the delamination tests, the rotor blade was subjected to adequate loads that occur in horizontal flight. That kind of test is basis to determine service life of rotor blades.
Źródło:: Journal of KONES; 2016, 23, 4; 487-494
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The influence of the blades leading edge anti-erosion protection on main rotor performances
Autorzy:: Wojtas, M.
Czajkowski, Ł.
Sobieszek, A.
Powiązania:: https://bibliotekanauki.pl/articles/243585.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: airfoil
rotor blades
flight tests
light rotorcrafts
ultra-light rotorcrafts
Opis:: This article presents the influence of rotor blade airfoil shape on main rotor performances. In this case, we analysed the influence of anti-erosion tape, which is applied to the leading edge of the blade to protect the blades from environmental conditions. In Gyro-Tech Innovation an Aviation Company and Institute of Aviation the independent tests of helicopter and gyroplane main rotors were performed. Research includes: bench tests, on the test stand for dynamic testing of insulated rotors and tests on two flying constructions, gyroplane Cavalon produced by AutoGyro GmbH Company and ultralight helicopter Dynali H3. On the test bench, a two-blade rotor, used in ultralight and unmanned helicopters, was tested. In article, the authors present importance of the proper selection and application of anti-erosion coatings on rotor blades. Discuss the behaviour of the above-mentioned constructions with main rotor blades leading edge covered anti-erosion tape, during flight tests. The results of bench tests, including the comparison of polar curves of the main rotor with anti-erosion coating and without were also presented and discussed. In the summary of this article among others the solution of technological pocked introduced in the rotor blade, corresponding to the thickness of the anti-erosion tapes, in such way that after tape is applied it does not change the contour of the blade airfoil were presented.
Źródło:: Journal of KONES; 2018, 25, 2; 409-414
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Strength analysis of the magnesium alloy control system lever of the ILX-27 unmanned helicopter
Autorzy:: Wojtas, M.
Sobieszek, A.
Żurawski, R.
Powiązania:: https://bibliotekanauki.pl/articles/246896.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: magnesium alloys
FEM
strain gauges
geometry verification
strength test
Opis:: The article presents the potential use of magnesium alloys in the aerospace industry. In this project the static strength analysis of magnesium alloy AZ31 of the control – system lever of the ILX-27 unmanned helicopter was carried out. Control-system levers are located between the swash plate and an actuator. The aim of the tests was to confirm the strength properties of the magnesium alloy control-system lever for their implementation on the ILX-27 unmanned helicopter. Strain gauge sensor was used during the tests. Strain gauges installation on easily corrodes surface requires special method. The laboratory tests were proceeded by the lever static strength calculations in the computing environment ANSYS Inc. Additionally, a geometry measurement of the control-system lever at CMM equipped with a laser scanner head was made to compare with the lever CAD model to assess the quality and method of conformance. Unmanned helicopter ILX-27 is being developed through the introduction new materials and technologies. Tests of control system lever have shown if it is possible to use lighter materials than aluminum alloy to provide sufficient strength properties while reducing the mass of the object. Analysis of the available materials used in aerospace engineering allowed selecting the best of magnesium alloy.
Źródło:: Journal of KONES; 2017, 24, 2; 293-300
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Innovative composite gyroplane rotor blades : fatigue tests
Autorzy:: Wojtas, M.
Sobieszek, A.
Szczepanik, T.
Powiązania:: https://bibliotekanauki.pl/articles/241581.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: rotor blades
fatigue tests
NDT
composite
Opis:: The paper presents test bench method for verifying the fatigue life of the rotor blades, working in operating conditions in a position steady flight (autorotation), on the aviation construction called the gyroplane. One of the critical elements of this design is the main rotor, which in its modern versions takes the form of advanced composite structures subjected to loads in flight complex variable, the nature of which differs from the well-known operating conditions of helicopter rotors. The article includes a description of the test object, which are composite rotor blades designed specifically to work in autorotation, the specificity of loads of autorotation rotor, and method of implementation of the gyroplane rotor work cycles in the test bench. The main aim of this research is to evaluate the sustainability of the composite blades under the gyroplane operating loads with the goal to allow the rotor to operate in the air. The tests were carried out for 100 hours of gyroplane flight at loads do not exceed the maximum operating loads, and for several hours under a load higher than operating. During test for the evaluation of composite structure, the infrared camera with dedicated software IRNDT was used. The reached showed structural integrity in critical mounting section of the blade.
Źródło:: Journal of KONES; 2018, 25, 4; 447-453
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Wojtas, M." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język