Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "emission tests" wg kryterium: Temat


Wyświetlanie 1-10 z 10
Tytuł:
Ekologiczna ocena samochodów osobowych w drogowych testach emisyjnych
Ecological assessment of passenger cars in road emission tests
Autorzy:
Merkisz, J.
Pielecha, J.
Jasiński, R.
Powiązania:
https://bibliotekanauki.pl/articles/250695.pdf
Data publikacji:
2015
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
samochód osobowy
testy emisyjne
ekologia
pomiar zanieczyszczeń
car
emission tests
ecology
Opis:
W artykule przedstawiono ocenę ekologiczną samochodów osobowych, którą dokonano na podstawie opracowanego testu, używanego do pomiaru emisji zanieczyszczeń w rzeczywistych warunkach ruchu. W stosowanych modelach całkowitej emisji spalin z transportu, wskaźniki emisji zanieczyszczeń są przyjmowane na podstawie wartości dopuszczalnych, określonych w normach emisji spalin. W takim przypadku wyniki uzyskane z modeli matematycznych są jedynie wartościami, których zastosowanie jest ograniczone do wartości teoretycznych. Konieczne jest zatem poszukiwanie nowych możliwości oceny emisji spalin pojazdów. Rozwiązaniem przedstawionego zagadnienia są pomiary wykonywane w rzeczywistych warunkach ruchu pojazdów, w których wykorzystywane są przenośne systemy pomiaru emisji zanieczyszczeń. Badania prowadzone na Politechnice Poznańskiej z użyciem tej metody są próbą odpowiedzi na pytania dotyczące rzeczywistej emisji zanieczyszczeń, ich zmienności odpowiadające zmiennym parametrom pracy silników i pojazdów. Przedstawione wyniki badań oraz wyznaczone wskaźniki uzyskano na podstawie kilkuletnich pomiarów zanieczyszczeń z pojazdów o różnej klasie emisyjnej oraz różnych parametrach technicznych i technologicznych.
This paper presents the preliminary concept research to develop the test used in the measurement of emissions in real traffic conditions for passenger vehicles. In the applied models of total exhaust emissions from transport, the emission rate is adopted based on maximum admissible values prescribed in an exhaust emission homologation standard. In such a scenario, the results obtained from the models are only estimates, whose applicability may be restricted. It is thus necessary to seek new possibilities to assess vehicle exhaust emissions such as real driving measurements. The measurements are performed under vehicle actual operating conditions and they use the PEMS (Portable Emission Measurement System) equipment. The research carried out at Poznan University of Technology with the use of this method attempts to answer questions regarding the exhaust emissions, their variability and relation to the engine and vehicle operating parameters. The paper presents several vehicles investigated for exhaust emissions under actual traffic conditions – RDE (Real Driving Emissions).
Źródło:
TTS Technika Transportu Szynowego; 2015, 12; 1049-1055, CD
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected remarks about RDE test
Autorzy:
Merkisz, J.
Pielecha, J.
Powiązania:
https://bibliotekanauki.pl/articles/133698.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
passenger cars
real driving tests
emisja spalin
samochody osobowe
Opis:
New test procedures for determining exhaust emission from passenger vehicles will be introduced in 2017. For several years, the European Commission has been developing new procedures, which aim is to perform tests in road conditions. The purpose is to determine the real values of emissions, which are not always reflected by the level of emissions obtained in the laboratory. Proper and accurate procedures for determining emissions in real traffic conditions (RDE – Real Driving Emission) have not yet been approved (as opposed to Heavy Duty Vehicles for which such conditions already exist), but there are proposals that are currently being analyzed by major research centers in Europe. There are many differences between those proposals such as determining road emission or research methodology related to emission measurement of hydrocarbons. The work compares the results of emissions measured in road tests using the latest legislative proposals related to passenger cars. The results are shown in relation to the used measurement method: classic method of determining exhaust emission; uses all measurement data determining the mass of harmful compounds and distance travelled during the test; method of averaging the measuring windows (MAW – moving average windows), also in the literature called EMROAD method, which determines the measurement windows (on the basis of carbon dioxide emissions from the WLTC test) and on its basis determines the road emission in RDE test; generalized method of instantaneous power (Power Binning), known in the literature as CLEAR – Classification of Emissions from Automobiles in Real driving, determines road emissions on the basis of generalized instantaneous power during the RDE test.
Źródło:
Combustion Engines; 2016, 55, 3; 54-61
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The parameters of passenger cars engine in terms of real drive emission test
Autorzy:
Merkisz, J.
Jacyna, M.
Merkisz-Guranowska, A.
Pielecha, J.
Powiązania:
https://bibliotekanauki.pl/articles/952926.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
exhaust emission
road tests
passenger cars
emisja spalin
testy drogowe
samochody osobowe
Opis:
This paper presents the preliminary concept research to develop the test used in the measurement of emissions in real traffic conditions for passenger vehicles. Work based on the lack of legal solutions for determining the environmental performance of light vehicles – as opposed to heavy-duty vehicles for which such regulations have specified. The elaboration is to compare the emission test used in clinical approval of passenger cars, while the synthesis of the results obtained under different conditions road tests. The intention is to develop a test for assessing the ecological vehicle in real traffic conditions, where restrictions will only drive type (gasoline engine, diesel engine, hybrid vehicle), which is consistent with the requirements of the certification tests. The result should be the foundation for the development of the test in terms of: the duration, to determine the operating conditions and vehicle and proposals for emission limit values.
Źródło:
Archives of Transport; 2014, 32, 4; 43-50
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problems of exhaust gas emission of modernized diesel locomotives operating in Poland
Problemy emisji spalin z modernizowanych lokomotyw spalinowych eksploatowanych w Polsce
Autorzy:
Stawecki, W.
Marciniak, Z.
Pielecha, I.
Pielecha, J.
Powiązania:
https://bibliotekanauki.pl/articles/133170.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
tests of diesel locomotives
exhaust gas emission
badania lokomotyw spalinowych
emisja spalin
Opis:
This article presents the analysis of emissivity of diesel locomotives operating in Poland. In the last years a significant part of the rail vehicles have been subjected to remotorization consisting in replacement of the combustion engine with the new generation model. This leads to the reduction of toxic constituents emission of exhaust gases from the railway vehicles. The analysis was conducted bearing in mind the histograms of locomotives loads in normal work conditions. It allowed to assess the ecological benefits of these engines during their operation.
W artykule przedstawiono analizę emisyjności eksploatowanych lokomotyw spalinowych w Polsce. Znaczną część pojazdów szynowych w ciągu ostatnich lat poddano remotoryzacjom polegającym na zastąpieniu silnika spalinowego nowszym generacyjnie modelem. Skutkuje to zmniejszeniem emisji składników toksycznych spalin z pojazdów szynowych. Analizę przeprowadzono z uwzględnieniem histogramów obciążeń lokomotyw w typowych warunkach pracy, co pozwoliło na ocenę korzyści ekologicznych związanych z tymi silnikami w czasie ich eksploatacji.
Źródło:
Combustion Engines; 2014, 53, 1; 48-58
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Propozycja testu RDE dla samochodów osobowych o napędzie hybrydowym
The proposal of RDE test for passenger cars with hybrid drive
Autorzy:
Merkisz, J.
Pielecha, J.
Molik, P.
Powiązania:
https://bibliotekanauki.pl/articles/134180.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
emisja spalin
testy drogowe
samochody osobowe
exhaust emission
road tests
passenger cars
Opis:
Priorytetem działań Unii Europejskiej na rzecz ochrony środowiska jest ocena emisji zanieczyszczeń w rzeczywistych warunkach ruchu pojazdów. Procedury takiej oceny opracowano dla pojazdów ciężkich i pojazdów pozadrogowych, natomiast brak jest unormować prawnych takiej oceny dla pojazdów lekkich (samochodów osobowych). W związku z tym, w artykule podano propozycję metodyki opracowania testów kontrolnych badań emisji zanieczyszczeń z samochodów osobowych. Do analizy wybrano samochody osobowe o napędzie hybrydowym, gdyż jest to najszybciej rozwijająca się grupa pojazdów o największych walorach ekologicznych, a jednocześnie najmniejszym przebiegowym zużyciu paliwa, spełniająca najnowsze normy emisji spalin. Według autorów koncepcja opracowania testów dla samochodów osobowych powinna opierać się następujących przesłankach: wyznaczeniu spójnego obszaru pracy silnika dla wybranych pojazdów osobowych, w taki sposób, aby w największym stopniu odpowiadał najczęstszym warunkom ruchu oraz określeniu parametrów mierzonych pod-czas testów drogowych i uzyskiwanych wskaźnikach emisji. W artykule przedstawiono procedurę wyznaczenia warunków pracy silników spalinowych, co w efekcie umożliwiło zaproponowanie testu RDE dla samochodów osobowych o napędzie hybrydowym.
The priority of the European Union operation is protecting the environment by evaluating emissions under real operating conditions. The procedures have been developed for the assessment of heavy vehicles and off-road vehicles, however there is no legal rules for such evaluation for light vehicles (passenger cars). The article contains, proposal for develop a test methodology for control of emissions from passenger cars. Hybrid vehicle was selected for analysis, because it is the fastest growing group of vehicles with the highest ecological value, while the smallest fuel consumption that meets the latest emission standards. The concept of designation of the road test for passenger cars should be based on the following considerations: the appointment of a consistent engine operating range for selected cars, in such a way that the greatest corresponded most frequent in real conditions and the parameters measured during the road test and obtained emission factors. The paper presents a procedure for the designation of the operating conditions of internal combustion engines, which enabled to propose RDE test for hybrid vehicles.
Źródło:
Combustion Engines; 2015, 54, 3; 369-375
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emisja spalin z wozów bojowych Rosomak w warunkach poligonowych
Exhaust emissions under combat simulating conditions from amv rosomak
Autorzy:
Merkisz, J.
Pielecha, I.
Pielecha, J.
Szukalski, M.
Powiązania:
https://bibliotekanauki.pl/articles/222245.pdf
Data publikacji:
2011
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
emisja spalin
badania drogowe
wozy bojowe
exhaust emission
road tests
combat vehicle engines
Opis:
W artykule przedstawiono rezultaty badań silnika spalinowego wozu bojowego — kołowego transportera opancerzonego 8x8 Rosomak w warunkach poligonowych. Do pomiarów wykorzystano mobilny analizator, który umożliwiał pomiar stężenia związków szkodliwych i jednocześnie masowego natężenia spalin. Analizy emisji cząstek stałych dokonano w oparciu o pomiar masy oraz liczbę cząstek stałych. Wykonano pomiary CO, HC, NOx oraz PM i zużycia paliwa w warunkach standardowej jazdy poligonowej, a także w trybie overboost. Na podstawie uzyskanych wyników dokonano analizy warunków pracy silnika i pojazdu, porównano wartości emisji spalin (drogowej i jednostkowej) oraz zużycia paliwa.
The paper presents the results of tests on a combustion engine of an armored modular vehicle 8x8 Rosomak under combat simulating conditions. For the tests a portable exhaust analyzer was used. It measured the concentrations of the exhaust components and the exhaust gas mass flow. The analysis of the PM emission was done based on the measurement of the mass and number of the particles. The measurements of CO, HC, NOx, PM and fuel consumption were performed under the conditions of combat simulation and in the overboost mode. Based on the obtained results an analysis of the engine and vehicle operation was performed and the on-road and unit exhaust emissions as well as on-road and unit fuel consumption were compared.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2011, R. 52 nr 1 (184), 1 (184); 85-90
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena porównawcza emisji zanieczyszczeń spalin autobusów: zasilanego CNG i olejem napędowym
Comparative assessment of exhaust emission buses: powered CNG and Diesel
Autorzy:
Merkisz, J.
Pielecha, J.
Gis, W.
Gis, M.
Jasiński, R.
Powiązania:
https://bibliotekanauki.pl/articles/133186.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
ekologia
emisja spalin
CNG
olej napędowy
testy drogowe
ecology
exhaust emission
diesel
road tests
Opis:
Artykuł odnosi się do badań emisji zanieczyszczeń spalin i zużycia paliwa autobusów: zasilanego CNG i olejem napędowym w krajowych rzeczywistych warunkach ruchu drogowego. Analiza ma charakter porównawczy. W artykule przedstawiono charakterystyki stężenia i natężenia emisji związków szkodliwych spalin i przebiegowego zużycia paliwa przez autobusy o różnym zasilaniu. Wnioski odniesiono do aspektów ekologicznych uzyskanych dla zasilania autobusu CNG (biometanem) i zasilanego konwencjonalnym olejem napędowym.
Article refers to the study of exhaust emissions and fuel consumption of buses: powered CNG and diesel oil in the domestic real traffic conditions. The analysis is comparative in nature. This paper presents the characteristics of concentration and intensity of harmful exhaust emissions and mileage fuel consumption by the above buses. Applications referred to the environmental aspects of the power generated for CNG bus (biomethane) and conventionally powered diesel.
Źródło:
Combustion Engines; 2015, 54, 3; 775-781
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of vehicle dynamic parameters on the exhaust emissions in RDE tests
Autorzy:
Pielecha, J.
Kurtyka, K.
Skobiej, K.
Powiązania:
https://bibliotekanauki.pl/articles/133633.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
passenger cars
road tests
Real Driving Emissions
emisja spalin
samochody osobowe
testy drogowe
rzeczywiste warunki emisji
Opis:
The article compares driving test data using the latest legislative proposals applicable to passenger cars with different drives. For this purpose, cars of one type were selected, meeting the same exhaust toxicity standard (Euro 6c) and differing in used internal combustion engines (with spark-ignition, compression-ignition and hybrid drive). Several measurements were performed on the same test route in accordance with the RDE test guidelines, which requires a several of criteria to be met. These criteria include the length of the measuring sections, their overall timeshare and the dynamic characteristics of the drive. A portable emissions measurement system (PEMS) was used to record the engine and vehicle operating parameters and to measure the exhaust emissions during tests. This allowed for the monitoring of parameters such as: load value, engine speed and vehicle velocity. Then the obtained results were analyzed for their compatibility with the RDE procedure requirements. By determining the road emission of individual harmful compounds for all vehicles and the dynamic parameters of drive (relative positive acceleration and product of speed and positive acceleration) in various phases of the road test it was possible to compare them. On this basis, the impact of dynamic conditions of road tests on the obtained results of the road exhaust emission of harmful compounds for passenger cars with various drives was defined.
Źródło:
Combustion Engines; 2018, 57, 4; 26-34
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Observations from PEMS testing of combustion engines of different applications
Autorzy:
Merkisz, J.
Pielecha, J.
Powiązania:
https://bibliotekanauki.pl/articles/133975.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
passenger cars
road tests
Real Driving Emissions
emisja spalin
samochody osobowe
testy drogowe
rzeczywista emisja cząstek
Opis:
The article compares data obtained in road tests with the latest legislative proposals relating to various applications of internal combustion engines. Passenger car emission tests have been performed several times on the same test route in accordance with the RDE procedure guidelines, for which a dozen or so criteria must be met, including the distance of each of the drive sections, their in the drive time and the dynamic characteristics of the drive. The analysis was also based on a two-dimensional operating density characterization, presented in the vehicle speed-acceleration coordinates. As a result, it was possible to compare dynamic properties, operating time density and, thus, to check the validity of conducted drive tests in terms of their feasibility and emission values. An exhaust emission related comparison of three types of powertrain have been presented: gasoline, diesel and hybrid in the RDE tests. The authors proposed a new form of presenting the road exhaust emissions results in relation to the carbon dioxide emission, referred to as a standardization of the emission results. The exhaust emissions from city buses fitted with different powertrains tested on an actual bus route and in the SORT test were also compared.
Źródło:
Combustion Engines; 2018, 57, 3; 40-55
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane zagadnienia dotyczące drogowych testów emisyjnych
Selected remarks about real driving emissions tests
Autorzy:
Pielecha, J.
Merkisz, J.
Markowski, J
Jasiński, R.
Magdziak, A.
Powiązania:
https://bibliotekanauki.pl/articles/314563.pdf
Data publikacji:
2016
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
samochody osobowe
emisja spalin
normy emisji spalin
ograniczanie emisji spalin
testy drogowe
procedura badawcza
metody pomiarów
automobile
emissions standards
reduction of emissions
exhaust emission reduction
road tests
research procedure
measurement methods
Opis:
Nowe procedury badawcze wyznaczania emisji drogowej zanieczyszczeń spalin dla pojazdów osobowych mają wejść w życie w 2017 roku. Od kilku lat Komisja Europejska zajmuje się opracowaniem nowych procedur, których celem jest wykonywanie badań w warunkach drogowych. Ma to na celu określenie rzeczywistych wartości emisji spalin, co nie zawsze odzwierciedla poziom emisji spalin w warunkach laboratoryjnych. Dokładne procedury badawcze emisji zanieczyszczeń w rzeczywistych warunkach ruchu (RDE – Real Driving Emissions) nie zostały jeszcze uchwalone (w odróżnieniu do pojazdów ciężarowych, dla których takie uwarunkowania już funkcjonują), jednakże istnieją propozycje, które obecnie są analizowane przez główne ośrodki badawcze w Europie. Propozycje te różnią się między sobą, m.in. sposobem wyznaczania emisji drogowej zanieczyszczeń, oraz metodyką badań uwzględniającą np. pomiar emisji drogowej węglowodorów. W artykule porównano wyniki emisji spalin uzyskiwane w testach drogowych z wykorzystaniem najnowszych propozycji legislacyjnych odnoszących się do samochodów osobowych. Uzyskane wyniki przedstawiono w odniesieniu do następujących metod pomiarowych: metoda klasyczna wyznaczania emisji drogowej związków szkodliwych – wykorzystuje się wszystkie dane pomiarowe wyznaczając masę związków szkodliwych i przebytą drogę podczas testu; metoda uśredniania okien pomiarowych (MAV – moving average windows), zwana również w literaturze metodą EMROAD, w której wyznacza się okna pomiarowe (na podstawie danych o emisji dwutlenku węgla z testu WLTC) i na ich podstawie wyznacza się emisję drogową w teście RDE; metoda kategoryzacji mocy (Power Binning), zwana w literaturze jako CLEAR – Classification of Emissions from Automobiles in Real driving, wyznacza się emisję spalin na podstawie kategoryzacji mocy podczas testu RDE.
New test procedures for determining exhaust emission from passenger vehicles will be introduced in 2017. For several years, the European Commission has been developing new procedures, which aim is to perform tests in road conditions. The purpose is to determine the real value of emissions, which are not always reflected by the level of emissions obtained in the laboratory. Proper and accurate procedures for determining emissions in real traffic conditions (RDE – Real Driving Emissions) have not yet been approved (as opposed to Heavy-Duty Vehicles for which such conditions already exist), but there are proposals that are currently being analyzed by major research centers in Europe. There are many differences between those proposals such as determining road emission or research methodology related to emission measurement of hydrocarbons. The work compares the results of emissions measured in road tests using the latest legislative proposals related to passenger cars. The results are shown in relation to the used measurement method: classic method of determining exhaust emission; uses all measurement data determining the mass of harmful compounds and distance traveled during the test; method of averaging the measuring windows, also in the literature called EMROAD method, which determines the measurement windows (on the basis of carbon dioxide emissions from the WLTC test) and on its basis determines the road emission in RDE test; generalized method of instantaneous power (Power Binning), known in the literature as CLEAR – Classification of Emissions from Automobiles in Real driving, determines road emissions on the basis of generalized instantaneous power during the RDE test.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2016, 17, 12; 1297-1303
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies