Temat: BLAST - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Numerical simulation of blast resistant steel plate strengthened with composite
Autorzy:: Kosiuczenko, K.
Niezgoda, T.
Barnat, W.
Panowicz, R.
Powiązania:: https://bibliotekanauki.pl/articles/245529.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: blast
composite
FEM
ply
simulation
Opis:: The paper presents the process of enhancing blast resistance of a thin steel plate by reinforcing it by a composite. The composite consisted of five differently orientated layers of high resistant S2/Glass fabric. Such system was subjected to a pressure wave generated by detonation of small TNT charge placed at a certain distance from the plate. Reinforcing the plate with composite layer improved the ballistic and blast wave protection level of the shield. Due to the usage of the composite the overall mass of the entire plate raised only slightly. Proposed solution can be used to improve the characteristics of existing armours by adding extra panels or modifying armours of transport vehicles. For the purpose of the numerical analysis, the Finite Element Method and explicit time integration were used. Calculations were done using LS-Dyna software. Numerical solutions of both steel plate and steel plate with composite are presented and evaluated. Pressure wave of the blast impulse, the physical model of the blast test, Structure of the four composite layer, deformation shape of steel-composite plate (pressure wave in Z-direction, t=1 ms), failure of plies, Huber-Mises-Hencky stress as material effort on plate are presented in the paper.
Źródło:: Journal of KONES; 2011, 18, 3; 155-160
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Investigation of a panel with an elastomer layer plus carbon fibres loaded with a blast wave
Autorzy:: Barnat, W.
Niezgoda, T.
Gieleta, R.
Panowicz, R.
Powiązania:: https://bibliotekanauki.pl/articles/247636.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: blast wave
experiment
FE analysis
elastomer layer
Opis:: Terrorist attacks are directed against the most important elements of the infrastructure and human life. Crews of the combat vehicles as well as transmission installation of oil, gas and electric energy are, first of all, exposed to such operations. Such a situation caused striving to increase the safety against the activity of short-time loads coming from explosions [l, 2]. The object of the presented investigations was a numerical-experimental analysis of an elastomer layer of the protective panel combined with an experimental verification. Developed elastomer structures constitute perspective materials and will be applied to solve the problems connected with the increase of combat vehicle safety as well as trouble constructions of pipelines and gas pipelines especially in the dangerous places such as passages over rivers. A plate with an elastomer layer (with carbon fibres) loaded with a 100 g TNT charge was subjected to the analysis. The numerical analysis was verified experimentally. The results of the conducted analyses will be applied in further works on the selection of the kinds and parameters of the energy absorbing layers. They will be also used for further validating and optimizing investigations, which will aim at absorbing or dispersion of a maximum great value of energy influencing the energy absorbing panel. Such panels can be used for constructing armoured vehicles and protective elements of stationary strategic constructions. The constructions which can be exposed to damages resulted from a different kind of dynamic forces such as impacts or influences of the pressure wave comingfrom detonation of an explosive material should have the structure enabling absorption of as great as possible part of energy which influences them. Energy absorbing elements are constructed in the form of sandwich structures coats with a specially selected core material. One of the interesting types of materials which can be used for this purpose is elastomer. These materials enable significant increasing of the protective degree due to their capacities of absorbing energy of a blast wave. Applying of these materials results in decreasing of vibrations frequency of a system loaded with a pressure impulse.
Źródło:: Journal of KONES; 2010, 17, 4; 19-26
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Analysis of a protective composite panel with energy adsorbent in the form of foamed aluminium
Autorzy:: Barnat, W.
Panowicz, R.
Niezgoda, T.
Gieleta, R.
Powiązania:: https://bibliotekanauki.pl/articles/247656.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: blast wave
analytical model
FE analysis
aluminium panel
Opis:: The article presents the results of the investigations into modelling a blast wave for huge charges of l kg TNT equivalent. Modelling of huge charges is a very interesting problem due to a scale effect. During numerical analyses a detonation phenomenon was ignored (for the reason of the analysis time). The paper considers the effects of the influence of a pressure wave coming from a huge TNT charge (modelled with energy) on a 6 mm thick steel plate as well as on a protective panel made of foamed aluminium with composite layer. A panel of foamed aluminium was used for the protection of the described plate. The particular elements of a panel, subjected to an experimental analysis, were jointed with the use of a glueing method. In the numerical model the particular component layers were jointed with contact. The ALE (Arbitrary-Lagrange-Euler) function was used for coupling between the Euler domain and the Lagrange domain. The method requires absolute location compatibility of the nodes from both jointed areas. In the results of the conducted investigations, the permanent deformation of the steel plate was obtained.. Additionally, the possibility of the steel plate deformation evaluation was considered on the basis of accessible literature. Due to a huge charge, the analysis was performed with the use of the finite element method with the eiperimental verification.
Źródło:: Journal of KONES; 2010, 17, 4; 35-44
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Introduction to modelling side IED explosion influence on special military vehicle
Autorzy:: Barnat, W.
Sławiński, G.
Moneta, G.
Panowicz, R.
Powiązania:: https://bibliotekanauki.pl/articles/241755.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: special military vehicle
improvised explosive devices
blast wave
numerical study
Opis:: One of the most endangering and challenging threats during recent warfare are explosions of Improvised Explosive Devices (IED) and their destructive influence on a light armoured vehicle. Providing sufficient protection is the most challenging issue which can be achieved thanks to complex studies and a proper design process. The article presents preliminary numerical analyses of side explosion near a special military vehicle with regards to newdeveloped standards. The results were used to modify the existing hull and enhance its protection capabilities against critical charge to provide better protection for personnel inside the vehicle. A numerical model was developed in LSPrePost software. All the computational analyses were carried out using an explicit LS-Dyna solver, where material properties of finite elements were described by the Johnson-Cook material model with the basic parameters specified in the standard tensile tests. Due to time consuming simulations, the Linux-based computational cluster was adopted. The setup (mass of the explosive, distance between explosive charge and vehicle, etc.) was taken from military codes. In their computational research, the authors performed also a kind of a sensitivity study changing some of parameters. Pressure, stress distribution and plastic deformations vehicle structure were analyzed.
Źródło:: Journal of KONES; 2012, 19, 4; 15-20
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Numerical-Experimental Investigation of Squared-Based Metal Pyramids Loaded with A Blast Wave From A Small Explosives Charge
Autorzy:: Panowicz, R.
Barnat, W.
Niezgoda, T.
Szymańczyk, L.
Grzymkowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/387276.pdf
Data publikacji:: 2012
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:: MES (metoda elementów skończonych)
fala uderzeniowa
interakcja struktury płynu
FEM
blast wave
flud structure interaction
Opis:: The paper presents the results of computer simulation and experimental investigation of blast wave action arising from a small explosive charge on a metal pyramid with a square base. This explicit finite element has been used to perform numerical analyses. This method is included in the Ls-Dyna software for modelling the behaviour of the pyramid exposed to the action of a pressure wave arising from the detonation of an explosive charge. The detonation process was described in programming bubble structure interaction was used to describe an influence of a blast wave on the structure.
Źródło:: Acta Mechanica et Automatica; 2012, 6, 1; 49-52
1898-4088
2300-5319
Pojawia się w:: Acta Mechanica et Automatica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Wpływ umiejscowienia ładunku wybuchowego na intensywność fali podmuchowej
Numerical simulation of blast wave
Autorzy:: Panowicz, R.
Barnat, W.
Powiązania:: https://bibliotekanauki.pl/articles/208831.pdf
Data publikacji:: 2010
Wydawca:: Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:: metoda elementów skończonych
model konstytutywny gruntu
fala podmuchowa
finite element method
soil constructive relation
blast wave
Opis:: W pracy przedstawiono wstępne wyniki badań nad rozprzestrzenianiem się fali podmuchowej pochodzącej od wybuchu 2,5 kg ładunku trotylu. Rozpatrzono najczęściej spotykane przypadki umiejscowienia ładunku w stosunku do powierzchni gruntu: na powierzchni, równo z powierzchnią, 5 i 10 cm pod powierzchnią gruntu. Do opisu procesu detonacji wykorzystano przybliżenie optyki detonacyjnej, a zachowanie się produktów detonacji opisano równaniem JWL. Zachowanie się elementów modelu opisano za pomocą równań mechaniki ośrodków ciągłych w ujęciu Eulera. Badano wpływ związku konstytutywnego opisującego zachowanie się gruntu na intensywność fali podmuchowej. Praca ma charakter aplikacyjny do badań nad bezpieczeństwem załóg znajdujących się w lekkich patrolowych pojazdach opancerzonych.
The numerical simulations' results of the detonation of improvised explosive device which was laid on the soil or was buried, and blast wave propagation in the air, are considered. Different constitutive models of soil are taken under attention. They have not great influence on pressure wave in the air, but they have great significance on crater size and shape. The simulations show that the maximum pressure, duration of the pressure impulse and its shape varies with depth of burial. The Euler finite element method (LS-Dyna) was used to solve the problem.
Źródło:: Biuletyn Wojskowej Akademii Technicznej; 2010, 59, 1; 143-151
1234-5865
Pojawia się w:: Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Numerical Analysis of IED Detonation Effect on Steel Plate
Autorzy:: Barnat, W.
Panowicz, R.
Niezgoda, T.
Dybcio, P.
Powiązania:: https://bibliotekanauki.pl/articles/387041.pdf
Data publikacji:: 2012
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:: fala uderzeniowa
improwizowane ładunki wybuchowe
MES (metoda elementów skończonych)
blast wave
IED
improvised explosive device
FEM
finite element method
Opis:: The article presents the results of initial works on protection of vehicles crews against improvised explosive mechanisms (charges) IED. The presented coupled problem of explosion and interaction of pressure impulse coming from detonation was described in available standard documents. The presented results are the introduction to works oncomposed protective layers applied in vehicles.
Źródło:: Acta Mechanica et Automatica; 2012, 6, 1; 10-12
1898-4088
2300-5319
Pojawia się w:: Acta Mechanica et Automatica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Numerical and Experimental Comparison of Combined Multilayer Protective Panels
Autorzy:: Barnat, W.
Panowicz, R.
Niezgoda, T.
Powiązania:: https://bibliotekanauki.pl/articles/387055.pdf
Data publikacji:: 2012
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:: MES (metoda elementów skończonych)
fala uderzeniowa
interakcja struktury płynu
elastomery
panel energochłonny
FEM
blast wave
fluid structure interaction
elastomers
protective panel
Opis:: The paper presents numerical and experimental analysis of combined multilayer protective panels. The developed structures are prospective solutions for enhancing protection of military vehicles and crucial elements of pipelines especially in places like river crossings.
Źródło:: Acta Mechanica et Automatica; 2012, 6, 1; 148-153
1898-4088
2300-5319
Pojawia się w:: Acta Mechanica et Automatica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "BLAST" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język