Temat: SPARK - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Determination of thermal efficiency of the spark ignition systems
Autorzy:: Sendyka, B.
Mitianiec, W.
Noga, M.
Wachulec, W.
Powiązania:: https://bibliotekanauki.pl/articles/246099.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion process
ignition system
thermal efficiency
spark plug
CNG
Opis:: The paper presents results of measurements performed to determine thermal efficiency of spark ignition systems. Because of small pressure change after sparking process smali volume chamber has been proposed for measurements. A direct measurement method of pressure increment determination has been chosen. In this method one pressure chamber is used. The caloric chamber isfilledwith nitrogen, which is a neutral gas. It is preferable medium than air because it is one-component gas and it has a precisely-known value of a specific gas constant. The value of speciflc gas constant is reąuested to calculate a value of discharge energy given to the gas. In the chosen method pressure increment in the chamber during spark discharge is measured. The pressure increment in the chamber during ignition is strictly related to the energy of spark discharge. The energy balance calculations determined values of heat los s es for two types of electrodes (normal and "thin") anddifferent initial pressure (p=0 bar and p=25 bar). The maximal value of the thermal efficiency was observedfor the higher value of pressure in chamber and thin electrodes of spark ping. It was also stated, that the higher thermal efficiency for" thin " spark ping electrodes is a result of reduced heat transfer. The paper presents results of the tests carried out in the caloric chamber of 4. l cm3 filled with nitrogen at ambient temperature using PCB transducer direct measurement method. Results of the measurements done using differential pressure transducer for the same parameters like in thefirst measurement method were similar.
Źródło:: Journal of KONES; 2010, 17, 1; 365-371
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Simulation of exhaust gases components formation in engine working with combustion initiation from ignition dose of fuel
Autorzy:: Sendyka, B.
Mitianiec, W.
Noga, M.
Powiązania:: https://bibliotekanauki.pl/articles/242242.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: modelling
simulation
spark ignition
compression ignition
exhaust gases emission
Opis:: The paper deals with problems of model analysis of the process of exhaust gases components formation in internal combustion engine working with combustion initiation from ignition dose of fuel injected directly into the working space. In result of scientific-research works carried out in the Chair of Internal Combustion Engines of Cracow University of Technology on the basis of a four stroke engine a driving unit was elaborated which may work both with spark ignition and combustion initiation from a ignition dose of fuel. Application of two combustion systems in engine aimed at combining the advantages of spark ignition with compression ignition driving units. Such an engine is characterized by fuel consumption comparable with that gained by compression ignition engines, whereas, the exhaust gases composition is similar to that occurring in up-to-date spark ignition engines. Similar assumption concern the Homogenous Charge Compression Ignition - HCCI system which seems to be a future solution of internal combustion engines, nevertheless, up till now, in spite of intensive works in many countries all over the world, one did not succeed to control the combustion process in a large range of rotational speeds and loads what would give the possibility of using it in traction application. The solution proposed in the patent application by Prof. B. Sendyka is not burdened with this drawback since the moment of occurrence of volumetric ignition of the formed mixture in the process of filling is tightly connected with the moment of fuel dose injection. In result of simulative studies carried out by use of KIVA-3V software on the discussed solution it was stated that the process of exhaust gases toxic components formation in engine working in the mode of ignition from pilot dose does not depart in generally form from that which occurs at work with spark ignition.
Źródło:: Journal of KONES; 2011, 18, 2; 391-396
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Test bed studies of an engine with combustion initiation from ignition dose of fuel
Autorzy:: Sendyka, B.
Noga, M.
Powiązania:: https://bibliotekanauki.pl/articles/245825.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: two-cycle engine
compression ignition
spark ignition
total efficiency of engine
Opis:: Results of test bed studies of combustion engine with work possibility with application of spark ignition and combustion from ignition dose injected directly into the combustion chamber were described in this article. In engine working according to the patent solution of Prof. B. Sendyka, during start and work at low rotational speed and low load a system realizing spark ignition of homogenous mixture formed in classical way in the intake manifold is active. For higher rotational speeds and heavy load the ignition system is switched off whereas, injectors of ignition dose injecting fuel by the end of the compression stroke directly into the working space of the engine are activated. The fuel dose injected into the combustion chamber undergoes auto-ignition and in this way the combustion process in the whole volume of the homogenous combustion charge accumulated in the cylinder is initiated. The mass of ignition dose of fuel constitutes about 5 – 10% of the whole fuel mass per working cycle what differs decisively the presented solution from other known engines working according to similar principles. Application of two combustion system in four stroke combustion engine aims at combining the advantages of spark ignition a compression ignition engines. The engine is characterized by easy starting and during work at higher rotational speed and higher load in the mode of ignition from pilot dose exploitation efficiency of energy contained in fuel is higher than for spark ignition engine, this finds direct reflection in increase in total efficiency by over 9% as related to the base value.
Źródło:: Journal of KONES; 2011, 18, 4; 427-509
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: New design of the five-stroke SI engine
Autorzy:: Noga, M.
Sendyka, B.
Powiązania:: https://bibliotekanauki.pl/articles/245394.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: five-stroke engine
spark ignition
additional expansion
increase of total efficiency
Opis:: The paper describes design of the five-stroke engine developed in the Chair of Combustion Engines at Cracow University of Technology. The idea of five-stroke engine, in which the expansion ratio is significantly greater than the compression ratio has been presented by the Belgian engineer Gerhard Schmitz. The prototype of such an engine was made by Ilmor Engineering. Engine developers have released results of preliminary research, but there is no detailed information on the toxic exhaust emissions. For this reason, at Cracow University of Technology the research was undertaken to determine the impact of implementing the five-stroke cycle into the engine with spark ignition to reduce toxic emissions and increase total efficiency. To achieve this goal, the test engine was built, which is based on a concept similar to the idea of Gerhard Schmitz, with the difference that it has not been designed from the ground up, and it is based on an existing four-cylinder four-stroke engine. In comparison with the original solution, the engine built in Cracow has a completely different design of timing system, four valves per cylinder and petrol direct injection. This paper presents a detailed description of the engine design and the results of its preliminary research. The results of the tests of the five-stroke engine confirm an increase of specific torque and power (related to unit of engine displacement) and improve of total efficiency within a certain range of the engine map.
Źródło:: Journal of KONES; 2013, 20, 1; 239-246
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Effects of using a dual-injector fuel system on a process of combustion in a spark-ignition engine
Autorzy:: Sendyka, B.
Noga, M.
Powiązania:: https://bibliotekanauki.pl/articles/246083.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: dual-injector fuel system
gasoline
direct injection
port injection
combustion
spark-ignition engine
Opis:: This paper analyzes aprocess of combustion in a spark-ignition engine. The aim of the analysis was to determine the differences in the combustion process between the engine with a classic multipoint injection system and a system which injects fuel directly to the cylinders as well. To aid in the analysis the measurements of the high variable pressure in the engine's cylinder against the crankshaft angle were taken. This allowed us to obtain indicated diagrams for both types of engines. To eliminate distortions, both functions were approximated using combined functions. The other basic parameters were also measured: torque, RPM and instantaneous fuel consumption. The analysis of the indicated diagrams yielded an indicated mean pressure and thermal efficiency for both fuel systems. Then, a comprehensive analysis ofpressures in cylinders was performed in order to determine the way the flame spreads in the cylinder for the two types of engines. The results obtained from this analysis show that the speed of combustion is greater for the charge formed by the dual-injector fuel system. The increased speed of the combustion, especially when it reaches a 50% fraction of the exhaust gas in the cylinder, is what accounts for the increase in the indicated mean pressure and the increase in the thermal efficiency of the engine with a dual-injector fuel system. The time of the spreading of the flame, as well as the fast burn period were reduced. The increased efficiency of the combustion process in the cylinder me ans that the heat losses through the cylinder sleeve are greatly reduced. The results of the research in this paper confirm the purposefulness of using a dual-injector fuel system in a spark-ignition engine.
Źródło:: Journal of KONES; 2010, 17, 1; 389-397
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: An impact of using a dual-injection system on a combustion engines working parameters
Autorzy:: Sendyka, B.
Noga, M.
Powiązania:: https://bibliotekanauki.pl/articles/246089.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: dual-injector fuel system
MP1
direct injection
combustion
spark-ignition engine
experimental investigations
Opis:: The paper analyses the impact of using a dual-injection system on the engine's working parameters. The analysis is based on the results of the test stand research on a four-stroke four-cylinder, spark-ignition engine. Dual-injection system combines the multipoint injection with additional injection directly into the combustion chamber. It is used to increase the performance of an engine without affecting the fuel consumption or the low toxicity of exhaust gas. For the purposes of this research an engine from Toyota Yaris was fitted with the direct injection by installing high pressure injectors on the cylinder head. This engine is factory-equipped with MPL Based on the tests performed four controlling characteristics of the torque and brake specific fuel consumption were prepared. The controlling value was the proportion of the fuel injected into the inlet channel to the fuel injected directly into the combustion chamber. The same relationships were also described in relation to temperature of the exhaust gas and the fraction in volume in the exhaust gas of ingredients such as carbon monoxide, carbon dioxide, unburned hydrocarbons and nitric oxide. Points of measurement were decided upon basedon the existing literature on the subject. The analysis of the test results shows apossibility ofa 2-4% decrease in the brake specific fuel consumption for the dual-injection engine in the low and middle RPM range and for the partial loads. The dual-injection engine also shows a decrease in the nitric oxide's fraction in the exhaust gas and a lower temperature of the exhaust gas. There was a small increase in the carbon monoxide and hydrocarbons.
Źródło:: Journal of KONES; 2010, 17, 1; 379-388
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Simulation of the work of a spark-ignition engine with a dual-injector fuel system
Autorzy:: Sendyka, B.
Noga, M.
Powiązania:: https://bibliotekanauki.pl/articles/246079.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: dual-injector fuel system
direct injection
port injection
combustion
spark-ignition engine
modelling
simulation
KIVA-3V
Opis:: This paper is about computer modelling of a four-stroke spark-ignition engine with a dual-injector system. Using a KIVA-3V program for Linux, computer simulations were performed for one of the cylinders fuelled by multipoint injection and by the dual-injector system, i. e. with direct injection into the cylinders on top of MPI. The modelling was done for a combustion engine Toyota 2SZ-FE with a dual-injector system. Both simulations were done for the same parameters of engine's work, i.e. at the same RPM of 2000 and the intake pipe pressure of 0.079 MPa. KIVA-3V program models the processes taking place in an internat combustion engine while taking into account physical and chemical phenomena occurring during the formation of a charge and during its combustion. Using a stochastic model of injection the program takes into account the movement of droplets and their dispersion. The results of the simulation show that the dual-injector system has an improved volumetric coefficient, i.e. improved engine performance. An increase in the engine's indicated pressure was also observed; this increases the engine's total efficiency. The intensification of the charge's angular momentum in a cylinder with a dual-injector system can explain the improvements in the course of combustion process. Because the air-fuel mixture was already partially formed in the engine there was a small increase in the unburned hydrocarbons in the cylinder. However, a marked drop in the carbon monoxide and nitric oxide were observed for the dual-injector system. Analyzing the overall results of the simulations one can ascertain a positive impact of using a dual-injector system on the working parameters of a spark-ignition engine.
Źródło:: Journal of KONES; 2010, 17, 1; 399-410
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "SPARK" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język