Wszystkie pola: combustion efficiency - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The description of the total efficiency of 2SZ-FE engine with the variable valve timing
Autorzy:: Sendyka, B.
Sochan, A.
Noga, M.
Rodak, Ł.
Powiązania:: https://bibliotekanauki.pl/articles/243046.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: silnik spalinowy
obieg Atkinsona
spalanie
sprawność ogólna
silnik
combustion engine
Atkinson cycle
combustion
total efficiency
engine
Opis:: In this paper there were conducted tests of the combustion engine with the Atkinson cycle and with applying variable valve timing. There was described the 2SZ-FE engine characteristics and assigned the total efficiency before and after application of the phase shifter. Secondly, there was determined the thermal efficiency of the single engine work cycles and also engine 's total efficiency by using the optoelectronic pressure sensor and mathematical programme. After that, it was available to present the range of the variable valve timing. Atkinson system, phases of 2SZ-FE engine timing gear, the total efficiency distribution during 75 % of throttle opening and when inlet valves are open, the total efficiency increase during 75 % of throttle opening, the total efficiency distribution during 50 % of throttle opening and when suction valves are open, the total efficiency increase during 50 % of throttle opening, the total efficiency distribution during 25 % of throttle opening and when inlet valves are opened, the total efficiency increase during 25 % of throttle opening, the total efficiency distribution with application of phases shifter are presented in the paper.
Źródło:: Journal of KONES; 2007, 14, 2; 401-407
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Determination of thermal efficiency of the spark ignition systems
Autorzy:: Sendyka, B.
Mitianiec, W.
Noga, M.
Wachulec, W.
Powiązania:: https://bibliotekanauki.pl/articles/246099.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion process
ignition system
thermal efficiency
spark plug
CNG
Opis:: The paper presents results of measurements performed to determine thermal efficiency of spark ignition systems. Because of small pressure change after sparking process smali volume chamber has been proposed for measurements. A direct measurement method of pressure increment determination has been chosen. In this method one pressure chamber is used. The caloric chamber isfilledwith nitrogen, which is a neutral gas. It is preferable medium than air because it is one-component gas and it has a precisely-known value of a specific gas constant. The value of speciflc gas constant is reąuested to calculate a value of discharge energy given to the gas. In the chosen method pressure increment in the chamber during spark discharge is measured. The pressure increment in the chamber during ignition is strictly related to the energy of spark discharge. The energy balance calculations determined values of heat los s es for two types of electrodes (normal and "thin") anddifferent initial pressure (p=0 bar and p=25 bar). The maximal value of the thermal efficiency was observedfor the higher value of pressure in chamber and thin electrodes of spark ping. It was also stated, that the higher thermal efficiency for" thin " spark ping electrodes is a result of reduced heat transfer. The paper presents results of the tests carried out in the caloric chamber of 4. l cm3 filled with nitrogen at ambient temperature using PCB transducer direct measurement method. Results of the measurements done using differential pressure transducer for the same parameters like in thefirst measurement method were similar.
Źródło:: Journal of KONES; 2010, 17, 1; 365-371
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Test bed studies of an engine with combustion initiation from ignition dose of fuel
Autorzy:: Sendyka, B.
Noga, M.
Powiązania:: https://bibliotekanauki.pl/articles/245825.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: two-cycle engine
compression ignition
spark ignition
total efficiency of engine
Opis:: Results of test bed studies of combustion engine with work possibility with application of spark ignition and combustion from ignition dose injected directly into the combustion chamber were described in this article. In engine working according to the patent solution of Prof. B. Sendyka, during start and work at low rotational speed and low load a system realizing spark ignition of homogenous mixture formed in classical way in the intake manifold is active. For higher rotational speeds and heavy load the ignition system is switched off whereas, injectors of ignition dose injecting fuel by the end of the compression stroke directly into the working space of the engine are activated. The fuel dose injected into the combustion chamber undergoes auto-ignition and in this way the combustion process in the whole volume of the homogenous combustion charge accumulated in the cylinder is initiated. The mass of ignition dose of fuel constitutes about 5 – 10% of the whole fuel mass per working cycle what differs decisively the presented solution from other known engines working according to similar principles. Application of two combustion system in four stroke combustion engine aims at combining the advantages of spark ignition a compression ignition engines. The engine is characterized by easy starting and during work at higher rotational speed and higher load in the mode of ignition from pilot dose exploitation efficiency of energy contained in fuel is higher than for spark ignition engine, this finds direct reflection in increase in total efficiency by over 9% as related to the base value.
Źródło:: Journal of KONES; 2011, 18, 4; 427-509
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "combustion efficiency" wg kryterium: Wszystkie pola

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język