Temat: load-bearing capacity - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Analysis of the influence of the changes in the value of dynamic viscosity coefficient in the direction of oil film thickness on the journal bearing load carrying capacity
Autorzy:: Miszczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/243539.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: slide journal bearing
load carrying capacity
friction force
friction coefficient
numerical calculation
Opis:: This article presents the results of numerical calculations of the hydrodynamic pressure distribution, load carrying capacity, friction force and friction coefficient of the slide journal bearing, if the assumed model of hydrodynamic lubrication takes into account the dependence of oil viscosity values on its temperature in all three directions of the adopted coordinate system, in particular, also across the thickness of the lubricant layer. This research considered the slide journal bearing lubricated with the Newtonian oil. The flow of oil was modelled as laminar and stationary. The bearing bushing had a full angle of wrap and its surfaces were smooth. In order to obtain hydrodynamic pressure distributions, the Reynolds type equation was numerically solved by application of the finite difference method (FDM). The numerical procedures for this research were prepared with the Mathcad 15 software. When adopting the classic models and simplifications for the hydrodynamic lubrication and a thin boundary layer, it is assumed, that the hydrodynamic pressure of lubricating oil does not depend on the position measured across the height of the lubrication gap. On the other hand, it is known, that the dynamic viscosity strongly depends on the temperature, which is a function of all three spatial variables. The aim of this work is to include, in the hydrodynamic lubrication model, the changes of viscosity in the direction of oil film thickness, and to investigate how it will affect the hydrodynamic pressure distribution and load carrying capacity of the journal bearing.
Źródło:: Journal of KONES; 2018, 25, 3; 355-362
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Carrying capacity and friction forces in a transverse journal bearing, lubricated with non-Newtonian oil
Autorzy:: Miszczak, A.
Sikora, G.
Powiązania:: https://bibliotekanauki.pl/articles/243066.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: slide journal bearing
hydrodynamic pressure
load carrying capacity
friction force
non-Newtonian oil
Opis:: In this article, the authors present the results of numerical calculations. Calculations concern dimensionless carrying capacity and friction forces in a transverse journal bearing, lubricated by the oil of non-Newtonian properties. For analytical-numerical considerations a model of apparent viscosity changes based on exploitation time, pressure, temperature, shear rate was assumed The non-Newtonian properties of lubricating oil were characterized by increasing viscosity with increasing shear rate and described as an additional part in the constitutive equationβ3·tr(A1 2)A1. Analytical-numerical calculations were performed for smooth, non-porous plain bearing with full angle of wrap. Non-isothermal, laminar and fixed flow of lubricant in the lubrication gap of the journal bearing was assumed. Numerical calculations of hydrodynamic pressure distribution were made for Reynolds boundary conditions. The finite difference method was used to determine the Reynolds equation and the successive approximation method by taking into account the influence of pressure, temperature and non-Newtonian properties on the change of apparent viscosity. The results of the calculations are presented in the form of graphs and tables illustrating the influence of relative eccentricity and pressure, temperature and non-Newtonian properties on changes in the dimensionless load and friction force. Analysis of the obtained results illustrates the high-pressure effect on the increase of the carrying capacity and friction force for high relative eccentricities. A similar situation is by considering the non-Newtonian properties.
Źródło:: Journal of KONES; 2017, 24, 3; 203-210
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Magnetic field impact on the temperature and pressure distribution in slide journal bearing
Autorzy:: Wierzcholski, K.
Miszczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/246908.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: slide journal bearing
magnetic induction field
non-Newtonian lubricant
conjugated fields
new general method
load carrying capacity
pressure decrements
pressure increments
Opis:: The topic of the presented article aims to demonstrate a new principle of hydrodynamic lubrication in mechanical, non-isothermal and electro-magnetic fields. In this article is presented hydrodynamic slide journal bearing in electromagnetic field. The aim of this article is a new general analytical and numerical solution determined the influence of the electro-magnetic field on the temperature distribution in the internal surfaces of the slide-bearing sleeve and pressure distribution in bearing gap. To the research methods and materials used in this article realization belong: the Mathcad 15 Professional Program and new semi-analytical methods applied for theory of hydrodynamic lubrication extended to the curvilinear orthogonal surface and coordinates. Particular solutions are introduced to the cylindrical coordinates. To the obtained results of lubrication of movable sleeve surface belong the increments of the bearing load carrying capacity during the presence and absence magnetic induction field in the case if non-Newtonian lubricant features and constant temperature are taken into account. Simultaneously are observed the increments of the bearing load carrying capacity during the presence magnetic field and Newtonian lubricant. Temperature increments (decrements) without and with magnetic field lead to the hydrodynamic pressure decrements (increments). Moreover are assumed simultaneously the temperature T and oil dynamic viscosity variations in length, width and bearing gapheight directions. From this assumption follows, that the energy equation must be solved simultaneously with the equations of motion i.e. consequently with pressure equation where viscosity depends on temperature and temperature depends on the coordinate in gap height direction.
Źródło:: Journal of KONES; 2017, 24, 2; 279-286
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The analysis of hydrodynamic pressure distribution and load carrying capacity in the gap of slide journal bearings with micro-grooves
Analiza rozkładu ciśnienia hydrodynamicznego oraz siły nośnej w szczelinie poprzecznego łożyska ślizgowego z mikrorowkami
Autorzy:: Miszczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/190378.pdf
Data publikacji:: 2017
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: slide bearing lubrication
journal bearings
hydrodynamic pressure
non-classical surface
micro-grooves
load carrying capacity
friction force
smarowanie łożysk ślizgowych
poprzeczne łożysko ślizgowe
ciśnienie hydrodynamiczne
nieklasyczna powierzchnia
mikrorowki
siła nośna
siła tarcia
Opis:: The purpose of this paper is to analyse the distribution of hydrodynamic pressure, load carrying capacities, and friction force in the gap of the slide bearing on account of the type, number, and size of micro-grooves on the surface of the sleeve. It was assumed that micro-grooves were distributed equally on the circumference of the sleeve as well as parallel to its axis. Micro-bearings with micro-grooves are more and more of ten utilized in the technical applications, e.g., in HDD disks or in computer fans. It is advisable to carry out a numerical analysis on the influence of the number and the size of micro-grooves on the value of the Basic flow parameters in the slide micro-bearing. A laminar flow of lubricating fluid and an isothermal model of the lubrication of the slide bearing was used for the analysis. A classical Newtonian model was applied as the constitutive equation. A cylindrical slide Bering with the finished length and smooth sleeve, and a full wrap angle was used for the research. The density and thermal conductivity of the oil were considered to be constant in the thin film of oil. The results of measurements of shape and sizes of micro-grooves in real micro-slide bearings were presented by the author in the previous publications. The results of that research are used at present to determine the preliminary assumptions concerning the shape and the size of the micro-grooves. The results obtained in the research show the minor influence of micro-grooves on the value of the friction force and a few percentages rate influence of micro-grooves on the value of load carrying capacity.
Celem niniejszej pracy jest analiza rozkładu ciśnienia hydrodynamicznego, siły nośnej i siły tarcia w szczelinie poprzecznego łożyska ślizgowego ze względu na rodzaj, liczby i wielkość mikrorowków na powierzchni panewki. Do analizy przyjęto mikrorowki rozłożone równo po obwodzie panewki i równoległe do osi panewki. Mikrołożyska ślizgowe z mikrorowkami są coraz częściej stosowane w technice, np. w dyskach HDD czy też wentylatorach komputerowych. Celowym jest dokonanie analizy numerycznej, jaki wpływ na wartość podstawowych parametrów przepływowych ma liczba i wielkość mikrorowków. Do analizy hydrodynamicznego smarowania przyjęto laminarny przepływ cieczy smarującej oraz izotermiczny model smarowania łożyska ślizgowego. Jako równanie konstytutywne zastosowano klasyczny model newtonowski. Do rozważań przyjęto walcowe łożysko ślizgowe o skończonej długości z gładką panewką o pełnym kącie opasania. W cienkiej warstwie filmu olejowego przyjęto niezmienność gęstości i współczynnika przewodzenia ciepła oleju. Wyniki pomiaru kształtu i wymiaru mikrorowków w rzeczywistych mikrołożyskach ślizgowych autor przedstawiał we wcześniejszych publikacjach. Wyniki tych badań służą obecnie do określenia wstępnych założeń dotyczących kształtu i wielkości mikrorowków. Uzyskane wyniki badań wskazują na znikomy wpływ mikrorowków na wartość siły tarcia i kilkuprocentowy wpływ mikrorowków na wartość siły nośnej.
Źródło:: Tribologia; 2017, 272, 2; 119-126
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "load-bearing capacity" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język