Autor: Michel, M. M. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Comparison the Adsorption Capacity of Ukrainian Tuff and Basalt with Zeolite–Manganese Removal from Water Solution
Autorzy:: Trach, Yuliia
Tytkowska-Owerko, Marta
Reczek, Lidia
Michel, Magdalena M.
Powiązania:: https://bibliotekanauki.pl/articles/1839128.pdf
Data publikacji:: 2021
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: water treatment
natural sorbent
ion exchange minerals
saponite
hematite
andesine
Opis:: Manganese is an undesirable element in tap water but is common in the groundwater. Several methods can be used for manganese removal, including adsorption. Mined rocks are commonly evaluated as adsorbents and it was the objective of this paper – to investigate the Ukrainian volcanic tuff and basaltic rock from the Ivanodolinsky quarry and compare it with Ukrainian zeolite as well as with literature data. The research was based on equilibrated batch tests at a temperature of 10°C and slightly acidic pH. The data were treated using Langmuir and Freundlich models in the linear form. The results indicated the spontaneous and favourable adsorption of manganese. The volcanic tuff was characterized by the highest adsorption capacity, twice higher than basalt and zeolite. The heterogeneity of the active adsorption sites on the tuff was also greater and resulted from the diversity of the mineral composition. Considering the literature data, the properties of tuff are worth further research.
Źródło:: Journal of Ecological Engineering; 2021, 22, 3; 161-168
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Technological Conditions for the Coagulation of Wastewater from Cosmetic Industry
Autorzy:: Michel, Magdalena M.
Tytkowska, Marta
Reczek, Lidia
Trach, Yuliia
Siwiec, Tadeusz
Powiązania:: https://bibliotekanauki.pl/articles/125001.pdf
Data publikacji:: 2019
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: industrial wastewater
pre-treatment
ferric coagulant
Opis:: Coagulation is often used for the pre-treatment of industry wastewater, with effectiveness strictly dependent on technological conditions. This study aimed at determining what technological parameters of coagulation of cosmetic industry wastewater provide the highest efficiency of clarification. The dosages of reagents, the order of dosing, as well as the one- and two-stage processes were investigated. The samples of raw wastewater were collected from average daily effluent from a cosmetics manufacturing plant. Liquid coagulant PIX 111 (FeCl₃) and NaOH as a pH-adjusting agent were used. Jar-test experiments were carried out to determine the optimum conditions for turbidity and total organic carbon (TOC) removal. The efficiency of clarification was high (90–99%) across a wide range of pH values (6–9) and coagulant doses (0.5–1.25 mL/L). What is important is that the coagulant dose of 0.56 mL/L provided 97.6% clarification efficiency without the addition of the alkali. The minimal stoichiometric excess of alkalinity for effective coagulation was 0.5 mmol/L. In all samples, the removal efficiency for TOC was lower than for turbidity, because some of the organic carbon forms were non-coagulating dissolved compounds. The wastewater from tonic and fluid production was very susceptible to coagulation. The addition of the coagulant before the alkali resulted in better wastewater treatment efficiency than the reverse order. Single-stage process with optimal doses of the reagents allowed to clarify wastewater to a level of 10 NTU. On the other hand, the two-stage process brought the turbidity down to 1 NTU level.
Źródło:: Journal of Ecological Engineering; 2019, 20, 5; 78-85
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Michel, M. M." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język