Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Liu, Z.-Z." wg kryterium: Autor


Tytuł:
An experimental study of deep borehole pre-cracking blasting for gas pre-drainage on a mine heading roadway in a low permeability seam
Badania eksperymentalne wysadzania przedszczelinowego otworów wiertniczych dla wstępnego odprowadzania gazu z chodnika w złożu o niskiej przepuszczalności
Autorzy:
Liu, J.
Liu, Z.
Gao, K.
Powiązania:
https://bibliotekanauki.pl/articles/348587.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
wysadzanie przedszczelinowe otworów wiertniczych
wiercenie przez pokłady
złoże o niskiej przepuszczalności
wstępne odprowadzanie gazów
deep borehole pre-cracking blasting
drilling through strata
low permeability seam
gas pre-drainage
Opis:
In low permeability outburst coal seam mine heading roadway, boreholes through the floor pre-drainage coal seam gas were used to eliminate the outburst risk of coal seam. Due to the low permeability, the gas pre-drainage time is long and the effect is poor, which further adds to the mining-excavation relay in the mine production and safety. In view of the above problems a study was conducted on the outburst prevention mechanism of the pre-cracking blasting and permeability improvement with the deep boreholes in the low permeability seam as well as on the improvement of the coal seam gas drainage rate. The description of the study is presented in the present paper. The results showed that after the pre-cracking blasting and permeability improvement technical measures with the deep boreholes completed in the low permeability outburst seam, the elastic potential of the seam was effectively released, the gas pressure gradient of the seam was reduced and the excitation outburst stress was effectively eliminated. The permeability coefficient of the seam was increased by150 times and the pure quantity of the gas drainage from the seam was 8-10 times higher than before the blasting operation was completed. The gas concentration in the working face is between 0.2-0.3% during the process of heading roadway. The drive speed was increased by 2 times.
W złożu o niskiej przepuszczalności w chodniku kopalnianym wykonano przezstropowo otwory wiertnicze do wstępnego odprowadzania gazów ze złoża w celu wyeliminowania ryzyka eksplozji. Słaba przepuszczalność złoża wpływa na długi czas i niezadowalający efekt wstępnego odprowadzania gazu, co dodatkowo opóźnia komunikację na linii wydobycia pod względem produkcji i bezpieczeństwa w kopalni. W świetle powyższych problemów przeprowadzono badanie nad mechanizmem ochrony przed wybuchem przy wysadzaniu przedszczelinowym oraz nad poprawą przepuszczalności poprzez wywiercenie głębokich otworów w złożu o niskiej przepuszczalności, a także nad usprawnieniem odprowadzania gazu ze złoża węgla kamiennego. W niniejszej publikacji przedstawiono opis badania. Wyniki wykazały, że po podjęciu kroków związanych z wysadzaniem przedszczelinowym dla poprawy przepuszczalności poprzez wykonanie głębokich otworów wiertniczych w złożu o słabej przepuszczalności uzyskano większą elastyczność złoża, obniżono gradient ciśnienia gazu w złożu oraz skutecznie wyeliminowano naprężenia występujące w wyniku inicjacji wybuchu. Współczynnik przepuszczalności złoża zwiększył się 150-krotnie, a ilość czystego gazu odprowadzanego ze złoża poprawiła się 8-10-krotnie w stosunku do jakości sprzed wysadzania. Stężenie gazu w przodku roboczym wyniosło 0,2-0,3% w momencie głębienia chodnika. Prędkość zwiększyła się dwukrotnie.
Źródło:
AGH Journal of Mining and Geoengineering; 2012, 36, 3; 225-232
1732-6702
Pojawia się w:
AGH Journal of Mining and Geoengineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fast edge detection approach based on global optimization convex model and Split Bregman algorithm
Autorzy:
Jing, Y.
Liu, J.
Liu, Z.
Cao, H.
Powiązania:
https://bibliotekanauki.pl/articles/329158.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
edge detection
active contour
global optimization
numerical minimization
split Bregman algorithm
detekcja krawędzi
kontur aktywny
optymalizacja globalna
algorytm Bregmana
Opis:
Active contour model is a typical and effective closed edge detection algorithm, which has been widely applied in remote sensing image processing. Since the variety of the image data source, the complexity of the application background and the limitations of edge detection, the robustness and universality of active contour model are greatly reduced in the practical application of edge extraction. This study presented a fast edge detection approach based on global optimization convex model and Split Bregman algorithm. Firstly, the proposed approach defined a generalized convex function variational model which incorporated the RSF model’s principle and Chan’s global optimization idea and could get the global optimal solution. Secondly, a fast numerical minimization scheme based on split Bregman iterative algorithm is employed for overcoming drawbacks of noise and others. Finally, the curve evolves to the target boundaries quickly and accurately. The approach was applied in real special sea ice SAR images and synthetic images with noise, fuzzy boundaries and intensity inhomogeneity, and the experiment results showed that the proposed approach had a better performance than the edge detection methods based on the GMAC model and RSF model. The validity and robustness of the proposed approach were also verified.
Źródło:
Diagnostyka; 2018, 19, 2; 23-29
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An investigation of a detection method for a subsurface crack in the outer race of a cylindrical roller bearing
Badania metody wykrywania pęknięć podpowierzchniowych w zewnętrznej bieżni łożyska walcowego
Autorzy:
Liu, J.
Shi, Z.
Shao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/300980.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
metoda wykrywania podpowierzchniowych pęknięć
łożysko walcowe
widmowa gęstość mocy (PSD)
krzywizna
detection method
subsurface crack
cylindrical roller bearing
power spectral density (PSD)
curvature
Opis:
Zmęczeniowe pęknięcia podpowierzchniowe, stanowiące jedną z głównych przyczyn uszkodzeń łożysk tocznych powodowanych okresowym działaniem sił kontaktowych i zewnętrznych obciążeń impulsowych, mogą prowadzić do katastrofalnych awarii maszyn wirnikowych. Badania metod wykrywania podpowierzchniowych pęknięć łożysk tocznych mają niezwykle istotne znaczenie dla obsługi serwisowej tych urządzeń. W prezentowanym badaniu, zaproponowano nową metodę detekcji podpowierzchniowych pęknięć w zewnętrznej bieżni łożyska walcowego. Metoda ta opiera się na pomiarze krzywizny oraz gęstości widmowej mocy (PSD) przemieszczeń. Opracowano dynamiczny model łożyska walcowego, w którego zewnętrznej bieżni powstało pęknięcie podpowierzchniowe . Model stworzono przy użyciu pakietu oprogramowania do analizy zjawisk szybkozmiennych metodą elementów skończonych w celu określenia przemieszczeń w dziedzinie czasu. Badano różnice krzywizny i PSD przemieszczeń dla łożyska, w którym powstało pęknięcie podpowierzchniowe w bieżni zewnętrznej łożyska oraz łożyska bez takiego pęknięcia. Różnice te wykorzystano do lokalizacji pęknięć podpowierzchniowych różnych rozmiarów. Wyniki pokazują, że różnice krzywizny i PSD przemieszczeń względem punktów pomiarowych na bieżni zewnętrznej między łożyskami walcowymi, z których jedno charakteryzujące się pęknięciem w warstwie podpowierzchniowej, a drugie nie, mogą być wykorzystywane do wykrywania położenia pęknięcia.
As one of major failure modes of roller bearings due to periodic contact forces and external impulse loads, subsurface cracks caused by fatigues may produce catastrophic failures of rotating machines. Investigations of subsurface crack detection methods for roller bearings are very useful for maintenance purposes of these machines. In this study, a new detection method based on the curvature and power spectral density (PSD) of displacements is presented to detect a subsurface crack in the outer race of a cylindrical roller bearing. A dynamic finite element model of the cylindrical roller bearing with a subsurface crack in its outer race is developed using an explicit dynamics finite element software package to obtain the time-domain displacements. Differences of the curvature and PSD of displacements of the bearing without and with the subsurface crack are investigated, which are used to detect the location of the subsurface crack with different sizes in the outer race of the bearing. The results show that differences of the curvature and PSD of displacements from the measurement points on the outer race of the cylindrical roller bearing without and with the subsurface crack can be used to detect the location of the crack.
Źródło:
Eksploatacja i Niezawodność; 2017, 19, 2; 211-219
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Strong Laser Field Induced Modifications of Electron-Transfer Processes in Ne⁺-He Collisions
Autorzy:
Lu, Z.
Sun, Y.
Ma, L.
Liu, J.
Powiązania:
https://bibliotekanauki.pl/articles/1032308.pdf
Data publikacji:
2017-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
32.70.Jz
34.50.-s
Opis:
A strong laser field ( ≈ 10¹⁵ W/cm²) induced low-collisional-energy charge transfer process in Ne⁺-He system is explored. In the low collisional energy regime, the cross-section can be ≈ 10¯¹⁷ cm² which is about two orders of magnitude higher than the collision-only process. With increasing collisional energy the cross-section curve displays flattens and the charge capture tends to be practically independent of the laser detuning. In addition, we find that the capture probability in this Ne⁺-He system varies significantly with the laser polarization angle.
Źródło:
Acta Physica Polonica A; 2017, 131, 6; 1519-1524
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laser Induced Quadrupole-Dipole Collisional Energy Transfer in Ca-Sr
Autorzy:
Lu, Z.
Sun, Y.
Ma, L.
Liu, J.
Powiązania:
https://bibliotekanauki.pl/articles/1400504.pdf
Data publikacji:
2015-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
32.70.Jz
34.50.-s
Opis:
A laser induced quadrupole-dipole collisional energy transfer system of Ca-Sr is proposed and the four-state quadrupole-dipole laser induced collisional energy transfer model is presented. The excitation spectrum calculated for the Ca-Sr system is characterized by a doublet structure and a width which is about twice wider than the dipole-dipole laser induced collisional energy transfer results. Calculating results show that the full width at half peak of the profile becomes larger and the quasi-static wing tends to be a broad flat as the field intensity increases, which are different from the reported results of dipole-dipole laser induced collisional energy transfer processes, dipole-quadrupole and quadrupole-quadrupole. A cross-section of $2.48 \times 10^{-14} cm^{2}$ at a laser field intensity of $5.21 \times 10^{7}$ V/m is obtained which indicates that the quadrupole-dipole process can be an effective way to transfer energy selectively.
Źródło:
Acta Physica Polonica A; 2015, 127, 6; 1620-1624
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on mine ventilation resistance coefficient inversion based on genetic algorithm
Badanie inwersji współczynników oporu wentylacji kopalnianej na podstawie algorytmu genetycznego
Autorzy:
Gao, K.
Deng, L.
Liu, J.
Wen, L.
Wong, D.
Liu, Z.
Powiązania:
https://bibliotekanauki.pl/articles/219844.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wentylacja kopalni węgla
współczynnik wentylacji
odwrócenie
algorytm genetyczny
coal mine ventilation
ventilation coefficient
inversion
genetic algorithm
Opis:
The frictional resistance coefficient of ventilation of a roadway in a coal mine is a very important technical parameter in the design and renovation of mine ventilation. Calculations based on empirical formulae and field tests to calculate the resistance coefficient have limitations. An inversion method to calculate the mine ventilation resistance coefficient by using a few representative data of air flows and node pressures is proposed in this study. The mathematical model of the inversion method is developed based on the principle of least squares. The measured pressure and the calculated pressure deviation along with the measured flow and the calculated flow deviation are considered while defining the objective function, which also includes the node pressure, the air flow, and the ventilation resistance coefficient range constraints. The ventilation resistance coefficient inversion problem was converted to a nonlinear optimisation problem through the development of the model. A genetic algorithm (GA) was adopted to solve the ventilation resistance coefficient inversion problem. The GA was improved to enhance the global and the local search abilities of the algorithm for the ventilation resistance coefficient inversion problem.
Współczynnik oporu oporu wentylacji jezdni w kopalni węgla jest bardzo ważnym parametrem technicznym w projektowaniu i renowacji wentylacji kopalnianej. Obliczenia oparte na wzorach empirycznych i badaniach terenowych w celu obliczenia współczynnika oporu mają ograniczenia. W niniejszym badaniu proponuje się inwertowaną metodę obliczania współczynnika oporu wentylacji kopalni za pomocą kilku reprezentatywnych danych dotyczących przepływu powietrza i ciśnienia w węzłach. Model matematyczny metody inwersji jest opracowywany na zasadzie najmniejszych kwadratów. Zmierzone ciśnienie i obliczone odchylenie ciśnienia wraz z zmierzonym przepływem i obliczonym odchyleniem przepływu są uwzględniane przy określaniu obiektywnej funkcji, która obejmuje również ciśnienie w węźle, przepływ powietrza i ograniczenia współczynników oporu wentylacji. Problem odwrotności współczynnika oporu wentylacji został przekształcony w nieliniowy problem optymalizacji poprzez opracowanie modelu. Zastosowano algorytm genetyczny (GA) w celu rozwiązania problemu inwersji współczynnika oporu wentylacji. GA został ulepszony w celu zwiększenia globalnych i lokalnych możliwości wyszukiwania algorytmu problemu odwrotności współczynnika oporu wentylacji.
Źródło:
Archives of Mining Sciences; 2018, 63, 4; 813-826
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Soft-tissue preservation in the Lower Cambrian linguloid brachiopod from South China
Autorzy:
Zhang, Z
Han, J.
Zhang, X.
Liu, J.
Shu, D.
Powiązania:
https://bibliotekanauki.pl/articles/20001.pdf
Data publikacji:
2004
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Lingulellotreta malongensis
Chengjiang Lagerstatte
soft tissue preservation
lophophore
brachiopod
linguloid brachiopod
China
Linguloidea
gastrointestinal tract
Cambrian
Lower Cambrian
paleontology
Opis:
The organization of the lophophore and the digestive system are recognized as two of the diagnostic characters in the definition of higher brachiopod taxa, and hence play a major role in their phylogenetic analysis, their structure, however, is very rarely fossilized. Here we describe and interpret specimens of the brachiopod Lingulellotreta malongensis, from the Lower Cambrian Chengjiang Lagerstätte (South China), one of the earliest known taxa of the Lingulellotretidae, in which lophophores and intact, U−shaped digestive tracts are extraordinarily well−preserved. The lophophore, with clearly preserved tentacles, corresponds to an early spirolophe developmental stage. The digestive tract consists of a mouth, esophagus, distended stomach, intestine and an anterior anus, and differs from that of the Chengjiang obolid Lingulella chengjiangensis by the presence of the dilated stomach and by the absence of a looped intestine as in Lingula. In addition, the relative sizes of the mantle and visceral cavities of Lingulellotreta malongensis also are described. These fossils demonstrate that by the Atdabanian brachiopods had already possessed advanced features, and suggest that a lophophore and a U−shaped intestine with an anterior anus are brachiopod plesiomorphies.
Źródło:
Acta Palaeontologica Polonica; 2004, 49, 2
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trunk ornament on the palaeoscolecid worms Cricocosmia and Tabelliscolex from the Early Cambrian Chengjiang deposits of China
Autorzy:
Han, J
Liu, J.
Zhang, Z.
Zhang, X.
Shu, D.
Powiązania:
https://bibliotekanauki.pl/articles/23260.pdf
Data publikacji:
2007
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Tabelliscolex hexagonus
Palaeoscolecida
Priapulida
Chengjiang deposit
Cricocosmia jinningensis
trunk ornament
fossil worm
China
Early Cambrian
Cambrian
Lower Cambrian
paleontology
Opis:
Cricocosmia jinningensis, one of the most abundant palaeoscolecid worms from the Lower Cambrian Chengjiang deposits of south China, was originally described as bearing double longitudinal rows of lateral conical sclerites on the trunk. New observation reveals that the ventral trunk bears an additional set of ventral sclerites while the lateral sclerites display a tubercle−bearing (inner surface) and net−like (outer surface) microstructure similar to that of Tabelliscolex hexagonus. These findings mean that: (1) Cricocosmia shows a dorso−ventral and antero−posterior differentiation in trunk ornament; (2) as seen from the microstructure, Cricocosmia is close to Tabelliscolex hexagonus, supporting the idea that lobopodians and arthropods, both of which show an upper capping layer in the outer sclerites, are more closely related than the palaeoscolecidans; and (3) the similarities among the scalids, pharyngeal teeth and the trunk spines of palaeoscolecidans are superficial. Tabelliscolex maanshanensis sp. nov., characterized by an inner concentric circlet of laminae in each tubercle of the lateral trunk plate, is proposed herein. Element mapping reveal that four known pathways of preservation can be found co−occurring in a single specimen of Cricocosmia or Tabelliscolex, which sheds new light on the preservation of the Chengjiang fossils.
Źródło:
Acta Palaeontologica Polonica; 2007, 52, 2
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Relationship between the Monomer Chain Length and the Electro-Optical Properties of Polymer Dispersed Liquid Crystals
Autorzy:
Liu, J.
Ozga, K.
Liu, X.
Zhen, Z.
Plucinski, K. J.
Szota, M.
Kityk, I. V.
Powiązania:
https://bibliotekanauki.pl/articles/958219.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
liquid crystal
electro-optical property
polymer dispersed
mesh size
response time
Opis:
Five polymers dispersed liquid crystalline (LC) films were fabricated using photo-polymerizable monomers with different lengths of carbon chains. These LC films have shown different electro-optical (EO) properties. Through their SEM pictures, the relationship between the linear electro-optical effect and the mesh size of the polymer network was explored. With the increase of number of photo-polymerizable monomers, the mesh size of the polymer network would become larger. So the liquid crystal molecules would be easily oriented in the electric field and therefore, the threshold voltage and saturation voltage would decrease. The open state response times were also reduced and the off state response times would be extended. The DFT simulations have shown principal role of the ground state dipole moments in the observed electro-optical efficiency.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 1; 457-460
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rejuvenating older apple trees by root pruning combined with arbuscular mycorrhizal fungi
Autorzy:
Zhang, J.
Liu, J.
Zhang, Z.
Pan, S.
Yang, L.
Yang, S.
Powiązania:
https://bibliotekanauki.pl/articles/11855204.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Opis:
Older apple trees often demonstrate physiologically unreasonable shoot distribution due to root system aging, which results in lower fruit yield and poor fruit quality. Therefore this study was conducted to test whether root pruning combined with arbuscular mycorrhizal fungi could restore growth potential of fortyyear-old Red Fuji apple trees (Malus × domestica Borkh.) in a commercial orchard in 2013, by root pruning along both sides of rows, 80 cm from the trunk, to a depth of 30 cm and application of 100 ml arbuscular mycorrhizal inoculum per plant. Results showed that the percentage of root colonized by mycorrhizal fungi increased as root pruning was combined with arbuscular mycorrhizal fungi, however mycorrhizal colonization was not seen in the control roots and roots only by root pruning. For control tree total number of shoots decreased by 28.22% in 2015 than in 2013 and shoots mainly distributed in the outer canopy accounting for 58.10% of the total, which caused the lower light intensity inside the canopy, followed by lower fruit yield and poor fruit quality. Compared to control plant, shoot reduced by 33.96 and 38.51% in the outer canopy but increased by 97.99 and 123.69% in the inner canopy in 2015, as well as 390.20 and 478.43% in the vertical height of 1.5 to 2.5 m canopy, respectively treated by root pruning alone and combined with arbuscular mycorrhizal fungi. Root pruning alone and combined with arbuscular mycorrhizal fungi also raised the relative light intensity by 38.71 and 60.26% in the inner canopy in 2015, subsequent fruit yield by 315.79 and 373.68% respectively, in comparison to control plant. Shoot re-distribution improved fruit quality such as increase in firmness and soluble solid. Data indicated that the effect of root pruning combined with arbuscular mycorrhizal fungi on the rejuvenation of older apple trees was stronger than root pruning alone. It is therefore concluded that root pruning combined with arbuscular mycorrhizal fungi can think of as a measure to renew the older apple trees.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2017, 16, 3; 27-35
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
iTRAQ-based quantitative proteomics analysis reveals inhibitory mechanismsof the antimicrobial peptide MDAP-2 against Salmonella gallinarum
Autorzy:
Zhang, Y.
Yu, S.
Ying, X.
Jia, B.
Liu, L.
Liu, J.
Kong, L.
Pei, Z.
Ma, H.
Powiązania:
https://bibliotekanauki.pl/articles/2087299.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Salmonella gallinarum
AMP
iTRAQ
inhibitory mechanism
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 3; 405-414
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of ZL400 mine cooling unit using semi-hermetic screw compressor and its application on local air conditioning in underground long-wall face
Opracowanie zestawu chłodzącego ZL400 składającego się z pół-hermetycznej sprężarki śrubowej i jego zastosowanie do klimatyzacji lokalnej w rejonie przodka ścianowego
Autorzy:
Chu, Z.
Ji, J.
Zhang, X.
Yang, H.
Dong, H.
Liu, J.
Powiązania:
https://bibliotekanauki.pl/articles/963990.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kopalnia węgla
zagrożenia spowodowane wysokimi temperaturami
przodek ścianowy
wentylacja
chłodzenie
coal mine
heat injuries
cooling unit
long-wall working face
ventilation and cooling
Opis:
Aiming at heat injuries occurring in the process of deep coal mining in China, a ZL400 mine-cooling unit employing semi-hermetic screw compressor with a cooling capacity of 400 kW is developed. This paper introduced its operating principle, structural characteristics and technical indexes. By using the self-built testing platform, some parameters for indication of its operation conditions were tested on the ground. The results show that the aforementioned cooling unit is stable in operation: cooling capacity of the unit was 420 kW underground-test conditions, while its COP (coefficient of performance) reached 3.4. To address the issue of heat injuries existing in No. 16305 U-shaped long-wall ventilation face of Jining No. 3 coal mine, a local air conditioning system was developed with ZL400 cooling unit as the system’s core. The paper presented an analysis of characteristics of the air current flowing in the air-mixing and cooling mode of ZL400 cooling unit used in air intake way. Through i-d patterns we described the process of the airflow treatment, such as cooling, mixing and heating, etc. The cooling system decreased dry bulb temperature on working face by 3°C on average and 3.8°C at most, while lowered the web bulb temperature by 3.6°C on average and 4.8°C at most. At the same time, it reduced relative humidity by 5% on average and 8.6% at most. The field application of the ZL400 cooling unit had gain certain effects in air conditioning and provided support for the solution of mine heat injuries in China in terms of technology and equipment.
Aby zapobiec zagrożeniom spowodowanym wysokimi temperaturami panującymi w podziemnych kopalniach w Chinach, zaprojektowano zestaw chłodzący ZL400 składający się z pół-hermetycznej sprężarki śrubowej o wydajności 400 kW. W pracy omówiono zasady działania zestawu chłodzącego, jego budowę oraz parametry techniczne. Przy wykorzystaniu specjalnie do tych celów zbudowanej platformy testowej, działanie zestawu zostało szczegółowo zbadane. Wyniki wskazały, że działanie zestawu jest stabilne, wydajność chłodzenia w warunkach testowych pod ziemią wyniosła 420 kW a współczynnik pracy wyniósł 3.4. W celu zapobiegania zagrożeniom spowodowanym przez nadmierne temperatury w rejonie przodka nr 16305 w kształcie litery U w kopalni węgla Jining 3, zaprojektowano układ klimatyzacji, którego głównym elementem jest zestaw chłodzący ZL400. W pracy przedstawiono charakterystyki przepływu strumienia powietrza w strefie mieszania i w strefie chłodzenia dla zestawu chłodzącego umieszczonego w rejonie wlotu powietrza. Analizy przepływu powietrza (chłodzenie, mieszanie, ogrzewania) opisano przy pomocy przebiegów i-d. Dzięki układowi chłodzenia obniżono temperatury termometru suchego w rejonie przodka średnio o 3°C, a maksymalnie o 3.8°C, zaś temperatura termometru wilgotnego obniżyła się średnio o 3.6°C, a maksymalnie o 4.8°C. Jednocześnie obniżeniu uległa wilgotność powietrza, średnio o 5%, a maksymalnie o 8.6%. Zastosowanie zestawu chłodzącego ZL400 w warunkach roboczych daje określone efekty i przyczynia się do rozwiązania problemu zagrożeń spowodowanych nadmiernymi temperaturami w kopalniach chińskich poprzez poszukiwania skutecznych technik i sprzętu.
Źródło:
Archives of Mining Sciences; 2016, 61, 4; 949-966
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fruit biomechanics based on anatomy: a review
Autorzy:
Li, Z.
Yang, H.
Li, P.
Liu, J.
Wang, J.
Xu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/24093.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Opis:
Fruit biomechanics is needed for quality determination, multiscale modelling and engineering design of fruit processes and equipments. However, these determined fruit biomechanics data often have obvious differences for the same fruit or tissue. In order to investigate it, the fruit biomechanics based on anatomy was reviewed in this paper. First, the anatomical characteristics of fruit biomaterials were described at the macroscopic ‘tissue’ level and microscopic ‘cellular’ level. Subsequently, the factors affecting fruit biomechanics based on anatomy and the relationships between fruit biomechanics, texture and mechanical damage were summarised according to the published literature. Fruit biomechanics is mainly affected by size, number and arrangement of cells, quantity and volume of intracellular spaces, structure, thickness, chemical composition and permeability of cell walls, and pectin degradation level and turgor pressure within cells based on microanatomy. Four test methods and partial determined results of fruit biomechanics were listed and reviewed. The determined mechanical properties data of fruit are only approximate values by using the existing four test methods, owing to the fruit biomaterials being non-homogeneous and living. Lastly, further aspects for research on fruit biomechanics were proposed for the future.
Źródło:
International Agrophysics; 2013, 27, 1
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selective agglomeration of magnetite in entlandite-serpentine system and implication for their separation
Autorzy:
Lu, J.
Yuan, Z.
Liu, J.
Li, L.
Wang, N.
Meng, Q.
Powiązania:
https://bibliotekanauki.pl/articles/110411.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
serpentine
pentlandite
magnetite
selective magnetic agglomeration
magnetic separation
Opis:
In nickel sulfide processing, magnesium silicates (serpentines) can easily form slime coatings or hetero-aggregation on pentlandite surfaces, and hence decrease the pentlandite flotation rate and recovery. In this work, magnetic separation of pentlandite from serpentine using selective magnetic coating through adding magnetite fines as magnetic seeds was investigated. Interactions of magnetite-pentlandite and magnetite-serpentine were calculated by the DLVO (Derjaguin-Landau-Verwey-Overbeek) theory. The results show that the interaction of magnetite-pentlandite was obviously stronger than that of magnetite-serpentine with an external weak magnetic field (4776 A/m-1). Therefore, fine magnetite fractions selectively adhered to the pentlandite surfaces and enhanced its magnetism, resulting in being separated from serpentine by magnetic separation, which was further verified by magnetic coating-magnetic separation and SEM observations.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 943-955
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Crystallization Process of $Fe_{75}Co_5Zr_{10}B_{10}$ Amorphous Alloy
Autorzy:
Sun, Y.
Zuo, B.
Wang, D.
Meng, X.
Liu, J.
Wang, L.
Hua, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1399278.pdf
Data publikacji:
2013-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.43.Dq
64.60.My
Opis:
$Fe_{75}Co_5Zr_{10}B_{10}$ amorphous alloy prepared by melt-spinning was annealed at various temperatures. The thermal property and microstructures were investigated by differential thermal analysis, X-ray diffraction, and transmission electron microscopy. The crystallization process of $Fe_{75}Co_5Zr_{10}B_{10}$ amorphous alloy is complex. The α-Fe phase precipitates from the amorphous matrix in the initial stage of crystallization. The α-Mn type (χ) phase precipitates at 570°C, but transforms to α-Fe phase and the Laves C14(λ) phase at higher temperature. In the final stage of crystallization, $Fe_3Zr$, $Fe_2Zr$, and unknown phases are observed and the λ-phase disappears. The α-Fe phase preferentially nucleates after annealing at 530C for 10 min and the χ-phase preferentially nucleates after annealing at 600C for 10 min. The nucleation barrier of χ-phase is larger than that of α-Fe phase. The local structure of χ-phase is more similar to amorphous phase.
Źródło:
Acta Physica Polonica A; 2013, 124, 4; 685-687
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies