Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Chen, H. Y." wg kryterium: Autor


Wyświetlanie 1-8 z 8
Tytuł:
Effects of colloidal montmorillonite particles on froth flotation of graphite, galena and fluorite
Autorzy:
Chen, T.
Zhao, Y.
Li, H.
Song, S.
Powiązania:
https://bibliotekanauki.pl/articles/110589.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
montmorillonite
graphite
galena
fluorite
slime coating
entrainment
Opis:
The effect of colloidal montmorillonite (MMT) on froth flotation of graphite, galena and fluorite was investigated in this work. The results showed that the presence of sufficient amount of colloidal MMT particles in the mineral slurry would be detrimental of flotation by reducing the recovery of minerals. This observation was attributed to slime coating of MMT on the coarse valuable mineral particles and entrainment of MMT particles in the froth product together with water in the triangle froth zones. The former would reduce the recovery of the valuable minerals because of hydrophilic MMT coating. The latter would decrease the concentrate grade. The degree of slime coating depended on slurry pH, while the degree of entrainment was closely related to water recovery. It was also found that slime coating was a dominant factor in mineral flotation in acidic pH regions in the presence of colloidal MMT particles.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 699-713
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New compensation scheme of magneto-optical current sensor for temperature stability improvement
Autorzy:
Chen, J.
Li, H.
Zhang, M.
Zhang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/221874.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magneto-optical current sensor
normalization
Verdet constant
birefringence
Opis:
A novel magneto-optical current sensor (MOCS) with two sensing arms is proposed to improve the temperature stability. One of the arms, with a highly stable permanent magnet attached and orthogonal to the other one, is designed to provide a reference that follows the temperature characteristics of the sensing material. By a normalization operation between two arms, the temperature drift is compensated adaptively and a sensing output proportional to the measured current can be reached. A dual-input and dual-output structure is specially designed for the reference sensing arm to demodulate the DC Faraday rotation angle. This scheme compensates simultaneously two main temperature influence factors, the Verdet constant and linear birefringence. Validation tests were carried out and are discussed.
Źródło:
Metrology and Measurement Systems; 2012, 19, 3; 611-616
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study on triboelectrostatic beneficiation of wet fly ash using Microwave Heating
Autorzy:
Li, H.
Chen, Y.
Zhang, X.
Zhao, Y.
Tao, Y.
Li, C.
He, X.
Powiązania:
https://bibliotekanauki.pl/articles/110399.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wet fly ash
triboelectrostatic beneficiation
microwave heating
efficiency
Opis:
Triboelectrostatic beneficiation, as a physical method, of fly ash cannot only meet the technical requirements of fly ash application but also recycle of an unburned carbon as a useful energy source. The aim of this study was to investigate the feasibility of improving efficiency of triboelectrostatic beneficiation of wet fly ash using microwave heating. The wet fly ash with different moisture contents had an average loss-on-ignition of 12.56%. The fly ash samples were heated in a microwave oven before the experiments. The experimental conditions were electric field voltage of 40 kV and air flux ranging from 12 to 30 m3/h. The influence of the microwave heating on the wet fly ash triboelectrostatic beneficiation was discussed under the conditions of different microwave intensity and irradiation time. The results indicated that the removal rate and recycle rate of the unburned carbon showed a significant increase performance as the wet fly ash was processed by the microwave heating which was attributed to changes of moisture contents and dielectric constants caused by the microwave heating. The feasibility had been verified according to the experimental study on fly ash with different moisture contents. It can be concluded that the microwave heating process was efficiently applied for the wet fly ash triboelectrostatic beneficiation.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 328-341
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and Magnetic Properties of Magnetron-Sputtered [Fe/Pt]ₙ Multilayer Films
Autorzy:
Zhang, Y.
Yu, W.
Chen, F.
Liu, M.
Li, H.
Powiązania:
https://bibliotekanauki.pl/articles/1401879.pdf
Data publikacji:
2015-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.55.Jk
75.50.Ss
Opis:
[Fe/Pt]ₙ multilayer films were prepared on thermally oxidized Si (100) substrates at 300°C using dc magnetron sputtering and annealed for different temperature ranging from 350 to 500°C. It is found that the as-deposited [Fe/Pt]ₙ multilayer films exhibit well-resolved periodic structures and low roughness of interface. The ordering degree of the annealed films decreases and their perpendicular magnetic anisotropy deteriorates with increasing the period number. Fe/Pt bilayer film annealed at 350°C shows (001) orientation and hard magnetic characteristic, the coercivity and perpendicular anisotropy enhance with increase of annealing temperature. In addition, the hard and soft magnetic phases are not fully magnetically coupled in the Fe/Pt film annealed at higher temperature.
Źródło:
Acta Physica Polonica A; 2015, 128, 3; 326-330
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of three species commonly known as“daqingye” by internal leaf anatomy and high-performance liquid chromatography analyses
Autorzy:
Zhang, Y.
Zhu, Y.
Chen, J.
Xia, C.
Deng, J.
Li, H.
Li, Y.
Li, J.
Liu, P.
Powiązania:
https://bibliotekanauki.pl/articles/59301.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Botaniczne
Opis:
The macroscopic and microscopic morphologies and indigo and indirubin concentration of the traditional Chinese medicine herbs Isatis indigotica Fort., Polygonum tinctorium Ait., and Baphicacanthus cusia (Nees) Bremek, all commonly known as “daqingye”, were determined and compared. The morphological analyses indicated that I. indigotica has leaves with winged petioles and no glandular hairs or crystals, P. tinctorium has leaves with membranous ocrea and clusters of calcium oxalate, and B. cusia has palisade cells in the mesophyll running over the main vein and single cells containing calcium carbonate crystals. Indigo and indirubin are chemical constituents that have been previously isolated from daqingye and were selected in this study as identification markers for high-performance liquid chromatography analysis due to their pharmacological activities. The chromatographic results showed that indigo and indirubin concentration varied significantly among the three species: high concentration of both indigo and indirubin were observed in I. indigotica, the highest concentration among the three daqingye plants was found in P. tinctorium but with low levels of indirubin, and the concentration of indigo and indirubin was quite low in B. cusia. In summary, three different species commonly known as daqingye were accurately distinguished by morphological observation, internal leaf anatomy analysis, and chromatographic analysis.
Źródło:
Acta Societatis Botanicorum Poloniae; 2018, 87, 1
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Reinforcement of the TNT System by a Newly-designed GAP-based Polyurethane-Urea: a Molecular Simulation Investigation
Autorzy:
Qian, W.
Shu, Y.
Ma, Q.
Li, H.
Wang, S.
Chen, X.
Powiązania:
https://bibliotekanauki.pl/articles/358512.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
TNT
GAP
polyurethane-urea
inter-molecular interaction
mechanical properties
Opis:
A glycidyl azide (GAP)-based polyurethane-urea (PUU) modifier used in the 1,3,5-trinitrotoluene (TNT)-based composite explosive was investigated by molecular simulation. Inter-molecular interactions were investigated using quantum chemistry calculation on the dimer of TNT and GAP-PUU, and attractive forces were found between the two molecules. The cohesive energy densities and the solubility parameters were obtained through molecular dynamics simulations combined with thermodynamic calculations on the TNT and GAP-PUU amorphous cell models, and the miscibility of the modifier in molten TNT was predicted to be good. The interaction energies and the mechanical properties were then obtained by molecular simulations and mechanical calculations on the solid-phase models of the GAP-PUU with TNT along three crystalline directions, and an improvement in the mechanical properties was predicted.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 2; 411-426
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction and Wear Behavior of 201HT Cast Aluminum Alloy with Various Competitive Material
Autorzy:
Li, R.
Chen, L. J.
Su, M.
Zeng, Q.
Li, H.
Liu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/382627.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
casting
aluminum alloy
friction and wear
competitive material
odlewanie
stop aluminium
tarcie i zużycie
materiał konkurencyjny
Opis:
The friction and wear properties of 201HT aluminum alloys and the corresponding competitive coupons were tested on an electro-hydraulic servo face friction and wear testing machine (MM-U10G). The microstructures of the competitive coupons were investigated by scanning electron microscopy (SEM) and consequently the corresponding friction and wear mechanisms were studied. The results demonstrated that: (1) the best competitive material of friction and wear performance of the 201HT was the 201HTC. (2) the 201HTC modified by carbon following the initial mill for oil storage of the micro-groove to be produced, increased the corresponding lubrication performance reduced the friction coefficient and wear rate effectively. (3) the 201HT-201HTC could obtain both better friction and wear mainly due to the initial process of grinding following the 201HT plastic deformation occurred in the surface and the formation of a series of re-melting welding points, whereas the 201HT material hardness would be similar to the 201HTC material hardness, which led into the competitive material friction and wear performance improvement.
Źródło:
Archives of Foundry Engineering; 2017, 17, 2; 55-62
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary results of spatial distribution of uranium and thorium in soil profi les near a uranium industrial site, Guangdong province, China
Autorzy:
Wang, J.
Liu, J.
Chen, Y.
Song, G.
Chen, D.
Xiao, T.
Li, H.
Wang, C.
Jiang, F.
Powiązania:
https://bibliotekanauki.pl/articles/146530.pdf
Data publikacji:
2016
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
spatial distribution
thorium
uranium
U/Th ratio
Opis:
Four soil profiles were collected from locations with different distances (5, 50, 250 and 1000 m) from a uranium mill tailings dam, Guangdong province, China, to investigate the pollution status of the soil in mining/ milling-related areas based on the contents of uranium (U) and thorium (Th), thus to understand the impacts of uranium industrial activities to the surroundings. The U and Th concentrations were determined by inductively coupled plasma mass spectrometry (ICP-MS) after conventional HF-HNO3-HClO4 digestion procedures. The results indicate that the soils within 50 m from uranium tailing were severely contaminated; those in 250 and 1000 m soil samples were observed to be with local background level even though these in 250 m had slightly higher U/Th ratios. Uranium concentrations varied from 5.50 ± 0.27 to 160.55 ± 8.03 mg/kg, with maximum values recorded in an intermediate layer of the 5-m distance soil profile. In comparison, the concentration of Th ranged from 6.02 ± 0.30 to 84.71 ± 4.24 mg/kg, with maximum values observed in the top layer of the 1000-m distance soil profile. The U/Th ratio varied from 0.15 to 11.99 compared with 0.20, 0.22 and 0.26 of the average for Guangdong province, national China and the world, respectively. The mean U/Th of four soil profiles showed a reduction with distance from the uranium mill tailing dam, suggesting the relatively large magnitude of uranium elevation in soils within limited distances.
Źródło:
Nukleonika; 2016, 61, 3; 367-371
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies