Temat: Surface roughness - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The influence of treatment conditions on cutting forces and surface roughness
Autorzy:: Labuda, W.
Powiązania:: https://bibliotekanauki.pl/articles/241665.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: turning dynamometer
surface roughness parameter
stainless steel
Opis:: One of the greatest problems of modern production techniques is the achievement of an appropriate quality at minimal costs and accompanied by the production efficiency increase. Therefore, while designing the production process, the technology used should have a considerable influence on the durability and reliability of machine parts to be produced. During finish treatment, the final dimensions as well as functional properties are imparted to a given element by application of proper treatment type. The engineer has a range of production techniques to choose for the proper surface layer formation. It is crucial to find a suitable solution which will meet the requirements as well as the work conditions of a given machine part. The article presents the results of influence of treatment conditions during turning of shafts on the cutting forces and surface roughness parameter. A roller made of S235JR steel was used for the research. The cutting process was carried out on a universal CDS 6250 BX-1000 and CU500MRD centre lathes. Measurement of cutting forces during lathing process used DKM 2010 and Kistler turning dynamometers. The turning process was conducted by a cutting tool with CCMT09T304 PF removable plate. During the turning, the following machining parameters were used: cutting speed Vc = 150 m/min, feed f=0.106 mm/rev and cutting depth ap = 0.5, 0.75, 1.0, 1.25, 1.5, 1.75 mm. The surface roughness was measured by T8000 profilometer.
Źródło:: Journal of KONES; 2016, 23, 1; 207-213
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The influence of cutting parameters on cutting forces and surface roughness
Autorzy:: Labuda, W.
Powiązania:: https://bibliotekanauki.pl/articles/246880.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: turning dynamometer
cutting forces
cutting temperature
surface roughness
Opis:: One of the greatest problems of modern production techniques is the achievement of an appropriate quality at minimal costs and accompanied by the production efficiency increase. Therefore, while designing the production process, the technology used should have a considerable influence on the durability and reliability of machine parts to be produced. During finish treatment, the final dimensions as well as functional properties are imparted to a given element by application of proper treatment type. The engineer has a range of production techniques to choose for the proper surface layer formation. It is crucial to find a suitable solution which will meet the requirements as well as the work conditions of a given machine part. The article presents the preliminary research results referring to the analysis of the influence of finishing lathing on the cutting forces and surface roughness of steel. The research was performed on a roller 39 mm in diameter made of S235JR steel. The finish tooling of pump shaft pins was carrying out on a universal centre lathe. The finish lathing process was carried out by means of a CCMT 09T304 PF Sandvik Coromant cutting tool with replaceable inserts. During the research, the effect of changes in the depth of cut on the value of cutting forces and temperature was defined. In addition, the influence of the depth of cut on the surface roughness was determined.
Źródło:: Journal of KONES; 2014, 21, 3; 199-204
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Experimental study on the influence of burnish parameters on the surface roughness reduction index
Autorzy:: Polanowski, S.
Labuda, W.
Powiązania:: https://bibliotekanauki.pl/articles/247016.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: burnishing process
surface roughness parameter
stainless steel elements
Opis:: The paper presents the research results of relationship between surface roughness reduction index KRa and three input parameters: burnishing speed Vn, feed fn and burnishing force Fn., and all combinations of levels of yields N measured for 48 points of experiment. The experiment was repeated 3 times. In order to select the model describing the results of tests, the stepping approximation analysis was performed. It relayed at incorporated into the model in following steps approximation elements function, giving the biggest decrease of the sum of squared deviations. The first approximation was based on the ternary monomial of the powers from 0 to 3 for each input value. This approximation aim was to show, that the index of surface roughness reduction does not depend on the burnishing speed in the made in the area of research. The reduced input parameters to two, i.e. fn and Fn. The plan of the experiment was brought to N = 12 and M = 12. The best approximation of test results obtained in the case of Laurent polynomial with stepping selection of elements. The biggest contribution to the decrease in the sum of squared deviations was element −1 ∙ 3 , and then fn 2. The article shows that in the range fn {0.6:1.2} there was not information on the successful model and the lack of influence of f and Fn on the results of the experiment. It is postulated to retry the experiment for the feed f <0.6.
Źródło:: Journal of KONES; 2016, 23, 3; 395-402
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The influence of changing the side angle of the cutting tool by wiper technology on the value of material ratio parameters of steel applied to marine pump shaft pins
Autorzy:: Labuda, W.
Charchalis, A.
Powiązania:: https://bibliotekanauki.pl/articles/244335.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: turning dynamometer
surface roughness
material ratio
stainless steal
Opis:: Angular momentum pumps are very often used in cooling circuits of medium and high power engines, power plant boilers as well as bilge, ballast and firefighting installations. Such an extensive use of angular momentum pumps on board is connected with their numerous advantages. However, during operation the wear of marine hull, the rotor and shaft seals take place. The research attempts to increase the service life of shafts. The article presents the research results of pump shaft pins after finish lathing. The research was performed on a roller 60 mm in diameter made of X5CrNi18-10 steel. The finish tooling of pump shaft pins was carried out on a universal CDS 6250 BX-1000 centre lathe. The finish lathing process was carried out by means of Sandvik Coromant cutting tool with replaceable inserts. In the research of lathing, process used inserts with Wiper technology. During the lathing, the optimal cutting parameters were used for inserts: CCMT09T302WF, CCMT09T304WF and CCMT09T308WF. The cutting process was performed at side angle of 90° ± 3°. The process of lathing used cutting tool dynamometer DKM 2010. During the research, the effect of cutting tool geometric on surface roughness parameter Ra of steel applied to marine pumps shaft pins was determined. The article presents the research results of material ratio parameters. In addition provides an examples shaft surface profile analysis and material ratio. Measurement of surface roughness and material ratio parameters was performed by T8000 profilometer.
Źródło:: Journal of KONES; 2015, 22, 2; 139-147
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The analysis of cutting tool geometric on cutting forces and surface roughness of steel applied to marine pumps shaft pins
Autorzy:: Labuda, W.
Powiązania:: https://bibliotekanauki.pl/articles/246319.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: turning dynamometer
cutting forces
cutting temperature
surface roughness
stainless steal
Opis:: One of the greatest problems of modern production techniques is the achievement of an appropriate quality at minimal costs and accompanied by the production efficiency increase. Therefore while designing the production process, the technology used should have a considerable influence on the durability and reliability of machine parts to be produced. During finish treatment the final dimensions as well as functional properties are imparted to a given element by application of proper treatment type. The engineer has a range of production techniques to choose for the proper surface layer formation. It is crucial to find a suitable solution which will meet the requirements as well as the work conditions of a given machine part. The article presents the research results referring to the analysis of the influence of finishing lathing on the cutting forces and surface roughness of stainless steel. The research was performed on a roller 60 mm in diameter made of X5CrNi18-10 steel. The finish tooling of pump shaft pins was carry out on a universal CDS 6250 BX-1000 centre lathe. The finish lathing process was carried out by means of Sandvik Coromant cutting tool with replaceable inserts. During the research, the effect of cutting tool geometric on cutting forces and surface roughness of steel applied to marine pumps shaft pins ware tested. In addition, the influence of cutting tool geometric on cutting temperatures was determined.
Źródło:: Journal of KONES; 2014, 21, 1; 147-152
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: The influence of cutting inserts geometric on surface roughness of steel applied to sea water pump shafts
Autorzy:: Labuda, W.
Powiązania:: https://bibliotekanauki.pl/articles/244988.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: turning dynamometer
surface roughness parameters
stainless steel
marine pump shaft
Opis:: One of the greatest problems of modern production techniques is the achievement of an appropriate quality at minimal costs and accompanied by the production efficiency increase. Therefore, while designing the production process, the technology used should have a considerable influence on the durability and reliability of machine parts to be produced. During finish treatment, the final dimensions as well as functional properties are imparted to a given element by application of proper treatment type. The engineer has a range of production techniques to choose for the proper surface layer formation. It is crucial to find a suitable solution which will meet the requirements as well as the work conditions of a given machine part. The article presents the research results of pump shaft pins finish turning. The research was performed on a roller 60 mm in diameter made of X5CrNi18-10 steel. The finish tooling of pump shaft pins was carry out on a universal CDS 6250 BX-1000 centre lathe. The finish lathing process was carried out by means of Sandvik Coromant cutting tool with replaceable inserts. In the research of lathing process used standard inserts (MF), inserts with increased tolerance (UM) and inserts with Wiper technology (WF). During lathing, the optimal machining parameters were used. The cutting process was performed at entering angle of 90°. The process of lathing used cutting tool dynamometer DKM 2010. During the research, the effect of cutting insert geometric and optimal cutting parameters on the surface roughness of steel applied to marine pumps shaft pins was determined.
Źródło:: Journal of KONES; 2015, 22, 3; 133-140
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Surface topography analysis of precision assemblies of fuel injector nozzles
Autorzy:: Miszczak, A.
Labuda, W.
Grondecki, M.
Powiązania:: https://bibliotekanauki.pl/articles/246251.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: Atomic Force Microscope
surface topography
roughness
plunger
barrel
injector pump pumping section
Opis:: Precision surface assemblies can be found in the two locations in a fuel system of a diesel engine. These parts are the pumping section in an injection pump and the injector nozzles. In this paper the authors present the results of surface topography measurements of precise surface assemblies of some fuel injectors. The measurements have been made with the atomic force microscope (AFM) NT-206. The results of surface topography measurements were presented in the form of 2D and 3D images and also as surface roughness profiles in some selected cross-sections of the investigated surfaces. It has been also shown cumulative roughness height distribution and roughness height distribution as well as Minkowski volume (first Minkowski functional). After scanning the surface on the atomic force microscope, the obtained data were processed with the SurfaceXplorer ® 1.311 and Gwyddion 2.35 software. The study concerned some new injector nozzles and also injector nozzles after a certain time of operation. The side and the conical precise surface assembly of the injector nozzle body and needle were tested. The atomic force microscope NT-206 allows to perform a surface scan of the sample with maximum dimensions of 32x32 μm and a maximum height of roughness ± 1 μm. Scanned area was divided into 256x256 measurement points, while the measurement was carried out in a static (contact) mode. The results presented in this paper also includes the calculated values of Ra, Sa (roughness average) and Rq, Sq (root mean square roughness) surface roughness parameters and the value of the skewness Ssk (Rsk), kurtosis Sku (Rku) and maximum distance between the lowest valley and the highest peak of investigated surface – Rt. The obtained data allow evaluating the degree and type of wear of tested surfaces on the micro-scale.
Źródło:: Journal of KONES; 2014, 21, 4; 353-360
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Surface roughness" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język