Temat: piston combustion engine - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Analysis of the wear of piston rings prototype in terms of team endurance test
Autorzy:: Kaźmierczak, A.
Dudziński, W.
Kaźmierczak, Ł.
Powiązania:: https://bibliotekanauki.pl/articles/245677.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
piston ring
wear
Opis:: The article discusses the results of the wear of piston rings for internal combustion engines with self ignition. The research was a prototype multilayer ring sealing of the porous coating and the so-called chromium embankment diamonds [2]. Technology of the rings is the deposition of multilayer coatings in the process of chromium plating. In times of chromium deposited from the bath particles are technical diamond's shape, and granulation. This technology is a response to domestic factory piston rings to the needs of the automotive market and is an innovative development. Conducted engine tests consisted of a 50-hour cycle and to hour break-in team life cycle, which was repeated 150 times. Thus the total duration of sample equal to 200 hours. Cycle life is a team containing a phase-hour cycle engine traffic load at maximum speed and maximum torque and maximum power of the tween partial load and idling. This cycle is repeated in the 200-hour test 150 times. During the measurement of key indicators were measured at the engine, the fuel consumption, coolant temperature and pressure of the lubricating oil. In order to calculate the wear of piston rings, the difference was calculated to measure the thickness and height before and after sample of 200 hours. In a similar way as the use of thickness and height of the rings was calculated by weight loss.
Źródło:: Journal of KONES; 2013, 20, 2; 181-187
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Analysis of the wear of piston ring prototype of an embankment of diamond in terms endurance test
Autorzy:: Kaźmierczak, A.
Kaźmierczak, Ł.
Powiązania:: https://bibliotekanauki.pl/articles/242911.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
piston ring
wear
Opis:: The article discusses the results of the wear of piston rings for internal combustion engines with spark ignition. The research was a prototype multilayer ring sealing of the porous coating and the so-called chromium embankment diamonds. Technology of the rings is the deposition of multilayer coatings in the process of chromium plating. In times of chromium deposited from the bath, particles are technical diamond's shape, and granulation. This technology is a response to domestic factory piston rings to the needs of the automotive market and is an innovative development. Conducted engine tests consisted of a 50-hour cycle and to hour break-in team life cycle, which was repeated 150 times. Thus, the total duration of sample equal to 200 hours. Cycle life is a team containing a phase-hour cycle engine traffic load at maximum speed and maximum torque and maximum power of the tween partial load and idling. This cycle is repeated in the 200-hour test 150 times. During the measurement of key indicators were measured at the engine, the fuel consumption, coolant temperature and pressure of the lubricating oil. In order to calculate the wear of piston rings, the difference was calculated to measure the thickness and height before and after sample of 200 hours. In a similar way as the use of thickness and height of the rings was calculated by weight loss.
Źródło:: Journal of KONES; 2012, 19, 4; 283-289
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Numeric calculation process of expression springy pistons ring from steel tape
Obliczenia numeryczne procesu tłoczenia elementu sprężystego wieloczęściowego pierścienia tłokowego z taśmy stalowej
Autorzy:: Kaźmierczak, A.
Ożga, E.
Zabłocki, W.
Powiązania:: https://bibliotekanauki.pl/articles/243215.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: silnik spalinowy
pierścień tłokowy
taśma stalowa
zwijanie
combustion engine
piston ring
steel tape
expression
Opis:: In article shortened description of technology was introduced forming of elements of springy multiple oil rings of combustions' engines and numeric model used to calculation of deformations and loads in tape. In calculation, theoretical model of nonlinear inelastic material was applied, with bilinear isotropic hardening model. Results of calculations were shown. In particularly springy element of oil ring type Hastings, forming device of springy elements type Hastings, set of two element for forming device of springy Hastings ring, view of one elements expression part device type Hastings, diagram of folding device, geometrical model of folding device, finite element model of folding device, graph of load function, view of deformed tape model, contours view notes stresses in fragment of tape are presented in the paper. Presenting research are result of realization of one of topics of the purpose project concerning implementation of prototype technology of piston rings of combustion engines accomplished by FPT "Prime" S.A. and the Wroclaw University of Technology.
W artykule przedstawiono skrócony opis technologii formowania elementów sprężystych wieloczęściowych pierścieni olejowych silników spalinowych oraz model numeryczny tego procesu wykorzystywany do obliczania odkształceń i obciążeń w taśmie. W obliczeniach zastosowano teoretyczny model materiału sprężysto - plastycznego bilinearny, z modelem kinematycznego umocnienia. Pokazano wyniki przykładowych obliczeń. W szczególności w artykule przedstawiono element sprężysty typu Hastnigs pierścienia olejowego, Urządzenie do tłoczenia elementów sprężystych typu Hastings, zespół dwóch tłoczników urządzenia do tłoczenia elementów sprężystych typu Hastings, zbliżenie części roboczej jednego z tłoczników urządzenia do tłoczenia elementów sprężystych typu Hastings, rysunek fałdownika, schemat geometryczny fałdownika, model dyskretny fałdownika, przebieg funkcji obciążenia, widok odkształconego modelu fragmentu taśmy, warstwice naprężeń węzłowych modelu fragmentu taśmy. Prezentowane badania są efektem realizacji jednego z zadań projektu celowego dotyczącego wdrożenia technologii prototypowych pierścieni tłokowych silników spalinowych realizowanego przez FPT "Prima" S.A. oraz Politechnikę Wrocławską.
Źródło:: Journal of KONES; 2007, 14, 2; 234-238
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Research and analysis of the results of the internal combustion engine locomotive during the 85-hour endurance test
Autorzy:: Borkowska, J.
Kaźmierczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/245178.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: friction pair
internal combustion engine
piston
ring
cylinder
tribological properties
coating
EMD645
endurance test
diamond powder
Opis:: Piston – ring – cylinder assembly of combustion engine has many friction pairs examples, also one of them which decide about fastness to wear, it means first sealing ring – cylinder, called further very simply ring – cylinder unit. During work of this unit, we can observe wear of piston, precisely – of coating which is deposited on ring to prolong service life. Objective of this work was to realize a test of set durability of railway engine EMD645 with power about 1300 kW. Within the framework of this test were investigated a prototyped piston’s rings with diamond embankment. Piston rings are made of diamond coating technology with a porous chromium coating, where in pores is deposited on said diamond powder with a grain size about 1 micron. The work will be carried out of an analysis of collaboration piston – rings – cylinder unit in internal combustion engine and an analysis of the use of hard materials in friction pairs, including powders. Will be performed research of material and description of diamond powder, which will be applied to the piston rings. After stability, testing in the locomotive engine EMD645 on the basis of the collected results will be developed conclusions of the wearing intensity on piston ring and relating them to the requirements for coatings. The work aims to show the possibilities and benefits of the application of new protective coatings on structural elements of the internal combustion engine in order to reduce their wearing, which is consistent with the observed trend of technology development.
Źródło:: Journal of KONES; 2016, 23, 2; 53-59
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The impact of the energy state of the surface of friction pairs on the friction and wear in internal combustion engines
Autorzy:: Borkowska, J.
Kaźmierczak, A.
Krakowian, K.
Cienciała, M.
Skorupa, P.
Łoza, Ł.
Powiązania:: https://bibliotekanauki.pl/articles/245015.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: friction pairs
top layer of surface
sealing function
piston ring
cylinder sleeve
combustion engine
tangential force
friction coefficient
molecular structure
bond
tribology
Opis:: The elements creating a friction pairs are described to be very difficult in terms of defining all optimal parameters in an unequivocal way. The research on stability of friction pairs is focused on the surface and the top layer of surface in the parts concerned. The main goal is to find new design solutions and materials, thereby achieving one million kilometers of mileage to main repair in the case of internal combustion engines. The biggest structural difficulties are noticeable in friction pairs where it can be observed sliding and returning motion, which is also connected with sealing function. A typical example of such pair is piston ring – cylinder sleeve in piston – rings - cylinder unit in an internal combustion engine. Engineers are currently seeking an additional factor, which would enable gaining the reduction of tangential force by reducing the friction coefficient in elements of friction pair during operations. The surface free energy may be such factor - it results from molecular structure and nature of the bonds between the molecules present in the material. Components of surface free energy determine the tribological properties of the material, which is reflected in the stability of the units. Energy state of the surface, which is connected with chemistry and characteristics in the material, is the first step to consider about the impact on wearing in internal combustion engine. This is the main topic of this article.
Źródło:: Journal of KONES; 2015, 22, 4; 37-41
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Various designs of the two-stroke engine heads with the valve flushed system
Autorzy:: Łoza, Ł.
Kaźmierczak, A.
Borkowska, J.
Skorupa, P.
Krakowian, K.
Cienciała, M.
Powiązania:: https://bibliotekanauki.pl/articles/242546.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine
two-stroke
internal combustion
valve flushed system
piston-controlled cam
high petrol consumption
oil in the petrol
toxic by-products
loud noise
uneven running
low efficiency
Opis:: The two-stroke engines have never acquired the popularity of the four-stroke engines due to their inherent performance limitations. The tasks of many engineering teams were to find the basic causes, which resulted in the inferior performance of these engines. Today’s task is to build a two-stroke engine whose performance could match that of a four-stroke engine in areas of common use. The most typical performance problems of a two-stroke engine are high petrol consumption caused by low efficiency, toxic by-products of combustion being emitted into the atmosphere (caused by oil present in the petrol), and uneven and loud engine noise. The greatest challenge is to achieve a good chamber purge during one stroke in which the fresh fuel mixture flows through the piston-controlled inlet port while at the same time the fumes are being exhausted through the outlet port. This in contrast with the four-stroke engines where the intake and exhaust are each done with two separate strokes. From the energy point of view, the two-stroke engine is not efficient because a certain amount of fresh fuel is being wasted in the exhaust fumes. We propose to replace the piston-controlled cam with the valve-flushed system, which will cause the combustion process to become more efficient. The purpose of this paper is to present various designs of the engine heads and analyse their performance. The goal of this proposal is to choose the best combination of these engine heads in order to achieve the optimum overall engine performance.
Źródło:: Journal of KONES; 2015, 22, 4; 187-190
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "piston combustion engine" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język