Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Liquids" wg kryterium: Temat


Wyświetlanie 1-7 z 7
Tytuł:
Ecotoxicity of ionic liquids as lubricants
Autorzy:
Kałdoński, T. J.
Kałdoński, T.
Załęska-Radziwiłł, M.
Pawlak, Z.
Powiązania:
https://bibliotekanauki.pl/articles/244323.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ionic liquids
ecotoxicity tests
Daphnia Magna
Opis:
In this article there is discussed the influence of ionic liquids on natural environment on the basis of detailed analysis of the literature information and the results of the Authors' researches carried out within the framework of the development and research project no. PBR/15-249/2007/WAT-OR00002904 financed by Ministry of Science and Higher Education during 2007-2011. The literature information about toxic features of ionic liquids is very skimpy, but the detailed analysis of it and the results of our own researches allow us to say that not all ionic liquids should be treated as fully environmentally friendly substances. Among these substances, there are non-toxic and moderately toxic but there are very toxic liquids, too. Therefore, uncritical rating all ionic liquids among Green Chemistry is inappropriate. The test results of ionic liquids ecotoxicity were compared with the results obtained for standard oils used at lubrication technologies, particularly at motorization. All reference oils, according to EU classification, were non-toxic. The tests were carried out in accordance with OECD 202 European normative document, which recommends carrying out the tests for Daphnia Magna crustaceans. There were carried out: acute immobilization tests to Daphnia Magna, calculation of the effective concentrations EC50-t and evaluation of ionic and reference liquids toxicity with regard to used bioindicators
Źródło:
Journal of KONES; 2015, 22, 1; 135-142
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identifying of thermotropic liquid crystal phase and its influence on lubricity of ionic liquids
Autorzy:
Kałdoński, T. J.
Piecek, W.
Kałdoński, T.
Pawlak, Z.
Powiązania:
https://bibliotekanauki.pl/articles/244373.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
mesophase identification
liquid crystals
ionic liquids
Opis:
In this article there is discussed a possibility of forming the liquid crystal structure in ionic liquids and its influence on performance characteristics, especially tribological, of these liquids. Formation of such thermal phase might influence on, among other things, easier creation of the boundary lubricating film, which is characterized by high viscous anisotropy. The results of tribological tests showed better lubricity of selected ionic liquids than modern PFPE oils. Identification of mesophase in ionic liquids was necessary. This method is described in the paper. Biolar PL polarizing interference microscope with thermal stabilizing table, with birefraction system, and Brüker Discover 8 powder diffraction instrument with a Cu lamp and monochromator were used. There was being searched the state characterized simultaneously by optical anisotropy properties and liquid state of aggregation. For identification of phase transition temperature, the additional calorimetric tests were carried out during the cycle of heating and cooling. These researches were carried out within the framework of the development and research project no. PBR 15-249/2007/WAT-OR0002904, financed by Ministry of Science and Higher Education during 2007-2011.
Źródło:
Journal of KONES; 2015, 22, 1; 143-156
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Initial studies on lubricity and surface properties of selected ionic liquids
Autorzy:
Kałdoński, T. J.
Stańczyk, M.
Gryglewicz, Ł.
Kałdoński, T.
Powiązania:
https://bibliotekanauki.pl/articles/244598.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
tribology
ionic liquids
surface tension
contact angle
lubrication
Opis:
The paper discusses the results of the studies on the surface properties and lubricating abilities of five ionic liquids compared to a high quality gear oil: Mobilube 1SHC 75W90 and two base oils: PAO-6 and SN-650. The investigated ionic liquids were: 1) tetrafluoroborate 1- benzyl-3-methylmidazolium, 2) bis (trifluoromethylsulfonyl) imide 3-methyl-1- propylpyridinium, 3) bis (trifluoromethylsulfonyl) imide 1,2-dimethyl-3-propylimidazolium, 4) bis (trifluoromethylsulfonyl) imide trihexyltetradecylphosphonium), 5) tetrafluoroborate trihexyltetradecylphosphonium. The density, surface tension and wetting angle as well as dynamic and kinematic viscosity were measured. Next, the lubricity properties were evaluated using the four-ball tester. The research results showed the more better lubricity properties of ionic liquids than the base oils. The research results showed the more better lubricity properties of ionic liquids than the base oils. The ionic liquids had the comparable properties to a high quality gear oil. Obtained results of these preliminary studies confirmed a possibility of using selected ionic liquids as new lubricants. These compounds can probably replace the lubricants used so far and find a wide scope of application in lubrication technology in the future. However, particular implementations require further complex studies.
Źródło:
Journal of KONES; 2011, 18, 1; 213-226
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wstępne badania właściwości smarnościowych i powierzchniowych wybranych cieczy jonowych
Investigations on lubricity and surface properties of selected ionic liquids
Autorzy:
Kałdoński, T. J.
Stańczyk, M.
Gryglewicz, Ł.
Kałdoński, T.
Powiązania:
https://bibliotekanauki.pl/articles/210921.pdf
Data publikacji:
2012
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
tribologia
ciecze jonowe
smarowanie
tribology
ionic liquids
lubrication
Opis:
W pracy omówiono wyniki badań właściwości powierzchniowych i smarnościowych pięciu cieczy jonowych w porównaniu do wysokiej jakości oleju przekładniowego Mobilube 1SHC 75W90 oraz dwóch olejów bazowych PAOAO-6 i SN-650.
In the paper, the investigation results of lubricity and surface properties for five ionic liquids, compared with the high quality gear oil Mobilube 1SHC 75W-90 and two base oils PAOAO-6 and SN-650, are discussed.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2012, 61, 1; 279-297
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The energetic - superficial and lubricity properties of petroleum products and ionic liquids
Autorzy:
Kałdoński, T. J.
Kałdoński, T.
Pakowski, C.
Powiązania:
https://bibliotekanauki.pl/articles/244139.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
boundary layer
lubricity
ionic liquids
surface tension
contact angle
Opis:
This paper presents the results of comparative investigations on the lubricity and energetic superficial properties of selected petroleum products and new ionic liquids (ILs). Three base oils from polish petroleum refinery (PAO—6, SN-650, SN—350) and lubricity additive (Additin RC2515 EP) have been investigated comparatively to four ionic liquids with imidazolium organic cations and different inorganic anions, i. e. bis (trifluoromethylsulfonyl) imide and tetrafluoroborate. The lubricating ability properties petroleum products and ionic liquids have been assessed according to Polish Standard PN-76/C-04 1 47 (ASTMD2596-69 and ASTM D2270-77) on Four-Ball Testing machine. The investigation range of lubricity properties are limited to the assessment only two parameters i. e. P(t) - seizure load for increasing continuous loading and G(oz) - wear limiting load capacity. The superficial properties of oil compounds and ionic liquids have been assessed by means of modern KSV Sigma 701 Tensiometer. Surface tension o and wetting angle fi were assessed. The obtained results confirmed the possibilities of using tested ionic liquids as lubricants. The best lubricity properties, close to properties of Additin RC2515, had 1—methyl— 3—oktyloxymethylimidazolium tetrafluoroborate.
Źródło:
Journal of KONES; 2009, 16, 1; 239-244
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Iron Porous Slide Bearings Impregnated with a Selected Ionic Liquid
Żelazne porowate łożyska ślizgowe nasycone dobraną cieczą jonową
Autorzy:
Kałdoński, T. J.
Kałdoński, T.
Powiązania:
https://bibliotekanauki.pl/articles/188620.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
tuleje porowate
spiek żelazny
ciecze jonowe
porous sleeves
iron sinter
ionic liquids
Opis:
W artykule przedstawiono wybrane wyniki badań porowatych łożysk ślizgowych spiekanych z proszku żelaza Höganas NC.100.24 z dodatkiem 2,5% mas. miedzi nasączonych dobranymi cieczami jonowymi na drodze kompleksowych i szczegółowych badań [L. 1–6]. Badania te zrealizowano w ramach projektu rozwojowego PBR/15-249/2007/WAT-OR00002904 finansowanego przez MNiSzW w latach 2007–2011 [L. 7]. Uzyskano wielokrotnie wyższą nośność i trwałość w porównaniu ze standardowymi tulejami ø25/ø35×20 mm smarowanymi dotychczas stosowanymi olejami, w tym także perfluoropolieterowymi. Dotychczas nie są znane łożyska spiekane z proszku żelaza i nasączone cieczami jonowymi, dzięki czemu ich trwałość i nośność są znacznie większe, dlatego postanowiono zgłosić do Urzędu Patentowego Rzeczypospolitej Polskiej odpowiednie zastrzeżenie patentowe [L. 8].
This article presents some selected results of the research on the slide porous bearings, sintered from the iron powder Höganas NC.100.24, with 2.5% of copper addition by weight, impregnated with selected ionic liquids, through comprehensive and detailed research works [L. 1–6]. The research was carried out within the framework of PBR/15-249/2007/WAT-OR00002904 Research Project financed by the Ministry of Science and Higher Education, during 2007–2011 [L. 7]. Several times higher load capacities and durabilities were obtained in comparison with standard ø25/ø35×20 mm sleeves lubricated with previously used oils, including perfluoropolyether oils. To date, there were no bearings sintered from the iron powder and impregnated with ionic liquids. The durability and load capacity of such bearings are higher, and that is why it was decided to submit a proper patent claim to the Polish Patent Office [L. 8].
Źródło:
Tribologia; 2018, 282, 6; 43-50
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania porównawcze olejów perfluoropolieterowych i wybranych cieczy jonowych jako smarów
Comparative investigations of perfluoropolyether oils and selected ionic liquids used as lubricants
Autorzy:
Kałdoński, T. J.
Ozimina, D.
Cudziło, S.
Durejko, T.
Gocman, K.
Zasada, D.
Kałdoński, T.
Powiązania:
https://bibliotekanauki.pl/articles/211248.pdf
Data publikacji:
2013
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
tribologia
smarowanie
ciecze jonowe
oleje perfluoropolieterowe
tribology
lubrication
ionic liquids
perfluropolyether oils
Opis:
W pracy omówiono wyniki badań porównawczych dwóch olejów perfluoropolieterowych o strukturze rozgałęzionej i dwóch olejów perfluoropolieterowych o strukturze liniowej oraz trzech cieczy jonowych alkoksymetyloimidazolwych o zróżnicowanej długości podstawników, lecz z tym samym hydrofobowym anionem bis(trifluorometylosulfonylo)imidowym. Wykonano badania właściwości reologicznych, termicznych (TG/DTA), powierzchniowo-energetycznych, tribologicznych, profilografometrycznych i mikroskopowych (SEM/EDS). Stwierdzono, że zbadane ciecze jonowe lepiej spełniały funkcję smaru w styku stal-stal niż renomowane oleje perfluoropolieterowe.
The paper presents the results of comparative investigations of two perfluoropolyether oils of branching structure and two perfluoropolyether oils of linear structure as well as three alkoxymethyloimidazole ionic liquids of diversified long alkyl cation but with the same hydrophobic bis(trifluoromethylsulfonyl)imide. The investigations of rheological, thermal (TG/DTA), surface energetical, tribological, profilographometrical and microscope (SEM/EDS) properties have been carried out. It was confirmed that the tested ionic liquids better fulfil a function of grease in steel - steel contact than the tested PFPE.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2013, 62, 1; 235-251
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies