Temat: composite piston - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Dilatometric researches of novel alloy for combustion engine pistons
Autorzy:: Żurek, J.
Slawinski, Z.
Jankowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/243032.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine piston
composite alloy
piston sample elongation
hysteresis
piston clearance
Opis:: The article presents dilatometric research results of composite alloy (in-situ) for combustion engines piston. Researches were performed with a precise dilatometer. Alloy's research test stand and test results including relative elongation, course of derivative of dimension increasing versus time with phase transition and course of coefficient of linear thermal expansion α for composite alloy versus temperature are presented in the article. Novel composite alloy allows getting a minimum difference of the coefficient of linear thermal expansion α during heating and cooling. In particular, the chemical composition of the novel composite silumin alloys; ATD of standard alloy – silumin Ak12 and novel composite alloy; schema of research stand and view of the measuring-head of the extension; course of the coefficient of linear thermal expansion α versus temperature during heating and cooling for the standard alloy and novel composite alloy; course of the relative piston elongation ΔL/Lo versus temperature during heating and cooling for the standard alloy and novel composite alloy; course of the derived function of the extension in relation to time dL/dt versus temperature for the standard alloy on pistons and novel composite alloy; course of the relative elongation in function of time during ageing of composite alloy at the temperature of 200°C with two-stage ageing process; course of the relative elongation in function of time during ageing of composite alloy at the temperature of 200°C for the first stage and second stage are presented in the article.
Źródło:: Journal of KONES; 2016, 23, 3; 585-596
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: High-quality silumin on pistons of combustion engines
Autorzy:: Jankowski, A.
Pietrowski, S.
Sieminska, B.
Szymczak, T.
Powiązania:: https://bibliotekanauki.pl/articles/245889.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
piston
composite alloys
heat treatment
thermal expansion
hysteresis
Opis:: In the paper the test results are presented for the AlSH2Cu5Ni5MgO.5CrO.05MoO.05WO.05VO.05 newly worked out silumin close to eutectic piston-silumin with the elevated content ofcopper and nickel to approx. 5% with relation to generally applied the AISH2 piston silumin. The novel silumin contains also Cr, Mo, In and V micro alloy additions in quantity approx. 0.05 percent for every element. Research of microstructure, HB hardness and coefficient of lineal thermal expansion a for the AlSil2Cu5Ni5MgO.5CrO.05MoO.05WO.05VO.05 silumin in the cast state, after the separation strengthening and additional short duration high-temperature heat-treatment were performed. Research of the microstructure of the AlSH2Cu5Ni5MgO.5CrO.05MoO.05WO.05VO.05 silumin showed the occurrence in it following constituent phases: alfa(Al), beta(Si), Al2Cu and AlMoCrWVMgNiSiCuFe. The separation strengthening brought about the coagulation of silicon emissions. The short duration high-temperature heat-treatment caused additional coagulation of silicon emissions and also its coalescence. Measurement of the HB hardness showed high hardness investigated alloy in the rough state, approx. 30% higher from the AlSi2 piston silumin. Measurement of the a coefficient of thermal expansion showed beneficial effects of novel alloy connected with the value decreasing of this coefficient as well so called hysteresis. Further studies on novel alloy will concentrate on alloy-additional and processes of the heat treatment.
Źródło:: Journal of KONES; 2009, 16, 4; 563-573
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Researches of influence kind of piston on some parameters of the S12-U Wola diesel engine
Autorzy:: Jankowski, A.
Kołomecki, J.
Siemińska, B.
Powiązania:: https://bibliotekanauki.pl/articles/246538.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diesel engine
engine testing
engine piston
composite alloys
emissions
fuel consumption
Opis:: Increased weight and greater requirements, regarding manoeuvring opportunities need extension of the power of combustion engines determining their powertrain units. In case of the family "W" engines, following developmental versions came into existence as a result of the modernization of the earlier version, among others thru the optimization of the combustion process, applying of the supercharging, as well as strengthening of the internal construction, which made it possible to carry greater thermal and mechanical loads. The subjects of the study were pistons made from composite materials of the small hysteresis of the alloy mounted on the S12-U combustion engine. In the novel construction of the piston, the outline of the overcoat was modified, the shape of the combustion chamber, the hole for the piston pin, grooves for the piston rings and shape of internal surfaces remained unchanged. A characteristic feature of the novel piston is the smaller hysteresis of the coefficient of thermal expansion composite alloy, alfa of which the pistons were made, whereas a so-called hysteresis is the difference of the coefficient alfa, which occurs during warming and piston cooling, and takes place during working of the piston in the combustion engine. The smaller hysteresis of the coefficient alfa makes the decreasing clearances between piston and cylinder possible, what has a beneficial influence on work parameters of the combustion engine, especially under conditions of partial loading of the engine. Basic parameters of the engine for the maximum torque characteristics and load characteristics are the object of the paper.
Źródło:: Journal of KONES; 2012, 19, 3; 185-194
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Verification of the precise position of the aircraft in air navigation based on the solution of the RTK-OTF technique
Autorzy:: Kowalski, M.
Jankowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/242780.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
Diesel engine
engine piston
composite alloy
thermal stability
Opis:: Certain results of the comparative studies of the high-speed Diesel engine V-12 of the “W” series were presented in the article. The engine was modernised in regard of possibilities to achieve better performances at specific fuel consumption, smaller exhaust emission, smaller scavenge, lower noise and better thermal stability. The subject of this work is the piston cast of novel composite silumin. The development of novel composite silumin (aluminium-silicon alloy), which contains a little more Copper and Nickel, and the introduction of novel alloyed elements, such as Chromium, Molybdenum, Tungsten, increases the strength of the alloy and its thermal stability during successive heating and cooling. The pistons made of this alloy may have a little bigger outside diameter than the pistons made of PA-12 standard alloy, and a smaller clearance between the piston and cylinder liner. The pistons made of standard and novel alloy were mounted successively in the "W" engine. The full load and part load curves were determined. The lubrication oil consumption, fuel consumption, exhaust emission, blow-by and noise were determined too. The article presents the results of the above-mentioned research. The novel composite alloy enables further engine modernization because the engine should operate at higher pressure and temperature in the combustion chamber.
Źródło:: Journal of KONES; 2017, 24, 4; 99-108
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Research performance of novel design of diesel engine
Autorzy:: Kowalski, M.
Jankowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/949487.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
Diesel engine
engine piston
composite alloy
thermal stability
Opis:: Certain results of the comparative studies of the high-speed Diesel engine V-12 of the “W” series were presented in the article. The engine was modernised in regard of possibilities to achieve better performances at specific fuel consumption, smaller exhaust emission, smaller scavenge, lower noise and better thermal stability. The subject of this work is the piston cast of novel composite silumin. The development of novel composite silumin (aluminium-silicon alloy), which contains a little more Copper and Nickel, and the introduction of novel alloyed elements, such as Chromium, Molybdenum, Tungsten, increases the strength of the alloy and its thermal stability during successive heating and cooling. The pistons made of this alloy may have a little bigger outside diameter than the pistons made of PA-12 standard alloy, and a smaller clearance between the piston and cylinder liner. The pistons made of standard and novel alloy were mounted successively in the "W" engine. The full load and part load curves were determined. The lubrication oil consumption, fuel consumption, exhaust emission, blow-by and noise were determined too. The article presents the results of the above-mentioned research. The novel composite alloy enables further engine modernization because the engine should operate at higher pressure and temperature in the combustion chamber.
Źródło:: Journal of KONES; 2017, 24, 4; 99-108
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Design of novel composite pistons for diesel engine
Autorzy:: Jankowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/247362.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
diesel engine
piston engine
composite alloy
combustion engine performance
Opis:: The paper presents the requirements to be met by diesel engines and their components, in particular pistons for engines of military vehicles. These requirements are related to the mass of modern military vehicles, which has greatly increased. Materials for the piston should have a good strength properties and low hysteresis of thermal expansion coefficient α across the range of operating temperatures, good resistance to galling, low abrasion, low coefficient of friction and good functional properties. On the clearance of the piston in the cylinder, the coefficient of thermal expansion α and its hysteresis has a decisive influence. The paper includes information on the piston working clearances, the requirements for pistons materials, their chemical composition, standard materials for the forged pistons, for the cast pistons (silumin alloys) and for the composite pistons. The paper presents the changes in coefficient of thermal expansion for the alloy in the raw state and after heat treatment and pistons made of new composite material prior to motor testing and after these tests. The completed new pistons have a lower coefficient of thermal expansion and lower hysteresis α, which allows reducing the running piston and cylinder clearances with the resulting effects.
Źródło:: Journal of KONES; 2014, 21, 4; 211-216
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "composite piston" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język