Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Huang, S.L." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Copper adsorption reaction rate and ion exchange ratio during the copper activation of sphalerite
Autorzy:
Liu, J.
Luo, D.
Huang, L.
Wang, Y.
Wen, S.
Powiązania:
https://bibliotekanauki.pl/articles/110651.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
sphalerite
copper activation
solution chemistry
ion exchange ratio
reaction rate
Opis:
A theoretical analysis method of the solution chemistry characteristic of Cu(II) at various pH values was developed. Using such method, the existence form of Cu species and their proportions in aqueous solution can be clearly determined. After that, the copper adsorption and ion exchange ratio (E) during the copper activation of sphalerite were investigated. The results indicated that the copper activation of sphalerite can be divided into two stages, i.e., the fast activation stage (t ≤4 min) and slow activation stage (t >4 min). The general form of the copper adsorption rate was determined as ΓCu=K1ln(t) +Γ1, which is confirmed by the data fitting of the fast activation stage. The lower activation pH results in higher ion exchange efficiency for Cu substituting Zn. For a strong acid pH of 4.1, the E maintains about 1:1 in the entire activation time range and is not dependent on the activation time. However, the value of E is greater than 1 under weak acidic (pH=6.2) and alkaline (pH=9.1) pH conditions and it significantly depends on the activation time. For such conditions, E decreases with increase in the activation time, which supports the ion exchange mechanism, but within short activation time, it is not a 1:1 ion exchange process.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 377-385
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficient sulfidization of lead oxide at high temperature using pyrite as vulcanizing reagent
Autorzy:
Zheng, Y.-X.
Lv, J.-F.
Wang, H.
Wen, S.-M.
Huang, L.
Powiązania:
https://bibliotekanauki.pl/articles/110351.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
lead oxide
sulfidization roasting
pyrite
reaction mechanism
TG
Opis:
A sulfidization roasting-flotation process was usually viewed to be effective in treating the refractory oxide ore. In this paper, pyrite was proposed to be applied as a potential vulcanizing reagent to transform PbO or its surface to PbS based on feasibilities of technology and economy. The evolution process, phase and characteristics of crystal growth were investigated by TG, XRD and SEM-EDS, respectively, to interpret the interaction mechanism of lead oxide and pyrite at high temperature. It was found that the decomposition process of pyrite under argon atmosphere was a slow process of sulfur released from FeS2 to FexS, which made the process easier to be controlled. When PbO was introduced into the system, the initial solid-solid (PbO-FeS2) reaction and prevailing solid-gas (PbO-S2(g)) reaction occurred at about 500 °C and 700 °C, respectively. Combined with the SEM-EDS analyses results, the optimal temperature for the sulfidization of PbO should be in the range of 700-750 °C.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 270-277
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Precise and High Speed Charge-Pump PLL Model Based on SystemC/SystemC-AMS
Autorzy:
Ma, K.
Van Leuken, R.
Vidojkovic, M.
Romme, J.
Rampu, S.
Pflug, H.
Huang, L.
Dolmans, G.
Powiązania:
https://bibliotekanauki.pl/articles/227120.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
SystemC/SystemC-AMS
phase locked loop PLL
radio frequency
mixed-signal modeling
hardware description language
Opis:
The Phase Locked Loop (PLL) has become an important part of electrical systems. When designing a PLL, an efficient and reliable simulation platform for system evaluation is needed. However, the closed loop simulation of a PLL is time consuming. To address this problem, in this paper, a new PLL model containing both digital and analog parts based on SystemC/SystemC-AMS (BETA version) is presented. Many imperfections such as Voltage Control Oscillator (VCO) noise or reference jitter are included in this model. By comparing with the Matlab model, the SystemC/SystemC-AMS model can dramatically reduce simulation time. Also, by comparing with Analog Devices ADI SimPLL simulation results, Cadence simulation results and real measurement results, the accuracy of the SystemC/SystemC-AMS model is demonstrated. The paper shows the feasibility of a unified design environment for mixed-signal modelling based on SystemC/SystemC-AMS in order to reduce the cost and design time of electrical systems.
Źródło:
International Journal of Electronics and Telecommunications; 2012, 58, 3; 225-232
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies