Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "He, Z." wg kryterium: Autor


Wyświetlanie 1-4 z 4
Tytuł:
Improving separation efficiency of 6-1 mm coal by introducing vibration energy to dense medium gas-solid fluidized bed
Autorzy:
He, J.
Zhao, Y.
Luo, Z.
Zhao, J.
Duan, C.
He, Y.
Powiązania:
https://bibliotekanauki.pl/articles/110018.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
vibration energy
dense medium gas-solid fluidized bed
fluidization quality
density uniformity
separation efficiency
Opis:
Effects of the vibration energy on the fluidization quality and separation performance of dense medium gas-solid fluidized bed were investigated experimentally. The magnetite powder with a wide size range of 0.3-0.074 mm was utilized as the basic medium solids. 6-1 mm fine coal sample from Yongcheng (China) was used to perform the separation experiments. The results indicate that the vibration amplitude A and superficial gas velocity U are greatly significant to the fluidization stability and the density distribution uniformity. Comparing with the bed without vibration, the optimal SP and Sρ values of 0.034 kPa and 0.018 g/cm3 are acquired in vibration bed with the operating factors of A = 1 mm, U = 1.8Umf, f = 15 Hz and Hs = 150 mm. The coal ash content was reduced from 27.84% to 9.50% at a separating density of 1.68 g/cm3 with a probable error E value of 0.505. The separation efficiency of 6-1mm fine coal is effectively improved by introducing vibration energy to dense medium gas-solid fluidized bed. The technology provides a novel approach to achieve high-efficiency separation of 6-1 mm fine coal in the arid and water-shortage areas.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 95-108
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanisms for the improved flotation of inherently hydrophobic graphite in electrolyte solution
Autorzy:
Lai, Q.
Liao, Y.
Liu, Z.
He, Y.
Zhao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/110761.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation
graphite
low-grade
electrolyte
Opis:
It is well documented that unavoidable ions in a pulp such as Mg2+, Ca2+, and K+ have a significant effect on the interaction for particles, especially for flotation of metallic sulfide minerals and clay minerals. In this study, the effect of electrolytes on the flotation of inherently hydrophobic mineral-graphite was studied. It was found that the zeta potential showed a dramatic decrease, and the reagent adsorption capacity of mineral enhanced in the present of electrolytes. The possible mechanism responsible for improved recovery was investigated by electrokinetic, surface tension and ions adsorption tests. It is likely that the hydrophobic force is stronger than the electrostatic force due to the reduced potential of graphite. This might be in favor of the formation of hydrophobic oil film leading to an increase in the graphite floatability. The experiments provided a new spectacle to study inherently hydrophobic mineral processing with electrolyte solution.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 944-954
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical and Experimental Study on Detonation Wave Propagation in Cylindrical High Explosive Charges with a Wave-shaper
Autorzy:
Pan, J.
Zhang, X.
He, Y.
Deng, Q.
Guan, Z.
Powiązania:
https://bibliotekanauki.pl/articles/358040.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
high explosive
detonation wave
Mach reflection
wave-shaper
Whitham method
Opis:
The use of a cylindrical high-explosive charge with a wave-shaper is an efficient way to obtain an ultra-high pressure and a convergent detonation wave. An analysis of flow fields corresponding to the regular and Mach reflection of detonation waves in a cylindrical high-explosive charge with a wave-shaper is presented in this paper. The pressure, flow velocity and triple point growth angle of the Mach stem were calculated. The Mach stem height was also determined by using the modified Whitham method. The results show that the Mach stem height rises from zero at the critical angle of Mach reflection and changes to the Chapman-Jouguet detonation state with the propagation of the detonation waves. Shock indentation experiments were conducted, in which a wave-shaper was used in a cylindrical high-explosive charge to form Mach reflection detonation waves. The results showed that the discrepancy between the experimental results and the theoretical calculations was less than 15%, which proves the validity of the proposed theoretical model.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 3; 658-676
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Response of energy-size reduction to the control of circulating load in vertical spindle pulverizer
Autorzy:
Li, H.
He, Y.
Zhang, Y.
Ge, Z.
Xie, W.
Wang, S.
Li, K.
Powiązania:
https://bibliotekanauki.pl/articles/110803.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
circulating load control
response of energy-size reduction
mixture grinding
energy efficiency
Opis:
In the vertical spindle pulverizer (VSP), the large circulation ratio and high ash and sulfur contents in circulating load would result in intensive energy consumption and low grinding efficiency. Although the control of circulating load would help increase the energy efficiency, no quantitative study has been conducted due to the high temperature and pressure in the closed VSP. In this study, response of energy-size reduction to the control of circulating load was studied by the experimental simulation method. Coal mixtures with fine/coarse ratio of 11:1, 8:1 and 6:1 were ground by a lab-scale roller mill. Energy-size reductions of the coarse coal were compared to evaluate the influence of circulating load control. Results showed that the product with the coarse coal increased by 30% when the specific breakage energy was 1.0 kWht–1 as the circulation ratio decreased from 11 to 6. Meanwhile, a breakage characteristic index of the coarse coal was two times higher due to the cushioning effect of fines. Besides, decrease of circulation ratio led to increase of the breakage rate of coarse coal, and the energy saving improved by 57%. With the same energy input of 2.0 kWht-1, the yield of –0.09 mm pulverized fuel (PF) increased from 22 to 43%. Therefore, controlling the circulating load is an effective method to improve the breakage rate of coarse coal and energy efficiency for PF generation.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 793-801
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-4 z 4

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies