Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Han, J. Y." wg kryterium: Autor


Wyświetlanie 1-4 z 4
Tytuł:
An active fault-tolerant control framework against actuator stuck failures under input saturations
Autorzy:
Qi, X.
Theilliol, D.
He, Y.
Han, J.
Powiązania:
https://bibliotekanauki.pl/articles/331084.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
fault tolerant control
actuator stuck failure
actuator constraints
reference redesign
linear matrix inequality
sterowanie tolerujące uszkodzenia
projekt odniesienia
liniowa nierówność macierzowa
Opis:
In this paper, a control framework including active fault-tolerant control (FTC) and reference redesign is developed subject to actuator stuck failures under input saturations. FTC synthesis and reference redesign approaches are proposed to guarantee post-fault system safety and reference reachability. Then, these features are analyzed under both actuator stuck failures and constraints before fault-tolerant controller switches. As the main contribution, actuator stuck failures and constraints are unified so that they can be easily considered simultaneously. By means of transforming stuck failures into actuator constraints, the post-fault system can be regarded as an equivalent system with only asymmetrical actuator constraints. Thus, methods against actuator saturations can be used to guarantee regional stability and produce the stability region. Based on this region, stuck compensation is analyzed. Specifically, an unstable open-loop system is considered, which is more challenging. Furthermore, the method is extended to a set-point tracking problem where the reachability of the original reference can be evaluated. Then, a new optimal reference will be computed for the post-fault system if the original one is unreachable. Finally, simulation examples are shown to illustrate the theoretical results.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2017, 27, 4; 749-761
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study on Discharge Characteristics by Using MF and RF Power in Remote Dielectric Barrier Discharge
Autorzy:
Kim, D.
Shim, Y.
Kim, H.
Han, J.
Powiązania:
https://bibliotekanauki.pl/articles/1398758.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.77.Bn
Opis:
We have developed an atmospheric pressure plasma apparatus of remote dielectric barrier discharge (RDBD) applicable for a large area. We have systematically studied the characteristics of medium frequency (MF, 40 kHz) and radio frequency (RF, 13.56 MHz) discharge using an optical emission spectroscope. Nitrogen (N₂) and argon (Ar) gases were used in the MF and RF discharge excitation, respectively, in a mixture with clean dry air (CDA). The peak of oxygen radical (O*₂) appears at 259.3 nm when the RDBD is employed. Furthermore, intensive peaks are observed at gas ratios of N₂:CDA=100:1 in MF excitation and at gas ratios of Ar:CDA=70:0.5 in RF discharge excitation. On the other hand, the contact angle shows about 5° in PET samples after the RDBD treatment using the RF and MF discharge excitation. Surface analyses of polyethylene terephthalate (PET) samples were carried out using an atomic force microscope and X-ray photoelectron spectroscope.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 707-710
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simultaneous removal of SO2 and NOx from sintering flue gas using ammonia-Fe(II)EDTA combined with electrolytic regeneration
Autorzy:
Liang, Y.
Yao, X.
Quin, L.
Chen, W.
Han, J.
Powiązania:
https://bibliotekanauki.pl/articles/208117.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ammonia
desulfurization
flue gases
nitrogen oxides
nitrogen removal
sintering sulfur dioxide
amoniak
odsiarczanie
gazy odlotowe
tlenki azotu
usuwanie azotu
spiekanie
ditlenek siarki
Opis:
Sulfur dioxide and nitrogen oxide are health hazardous gases, which contribute to the formation of submicron acidic particulates. To reduce SO2 and NOx emission from the sintering flue gas, the combination of ammonia-Fe(II)EDTA solution scrubbing with Fe(III) electrolytic regeneration is proposed. The above method has the following advantages: direct conversion of NOx and SO2 to harmless N2 and SO4 2−, recovery of the by-product (NH4)2SO4), simultaneous removal of NOx and SO2 emission from flue gas in the reactor. The effect of the pH, initial Fe(II)EDTA concentration, and voltage on the desulfurization and denitration efficiencies was investigated using a bench-scale reactor. The maximal desulfurization and denitration efficiencies were 98% and 52%, respectively. The optimum parameters were pH ˃ 5.0, 2.1 V, and 0.05 mol·dm–3 Fe(II)EDTA concentration. SO2 and NOx removal from the sintering flue gas by ammonia-Fe(II)EDTA solution scrubbing combined with electrolytic regeneration was also demonstrated in a pilot-scale reactor.
Źródło:
Environment Protection Engineering; 2018, 44, 2; 19-36
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-4 z 4

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies