Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Li, M" wg kryterium: Wszystkie pola


Wyświetlanie 1-11 z 11
Tytuł:
Sol-Gel Synthesis of Nanocomposite $Cu-Li_4Ti_5O_{12}$ Structures for Ultrahigh Rate Li-Ion Batteries
Autorzy:
Erdas, A.
Ozcan, S.
Guler, M.
Akbulut, H.
Powiązania:
https://bibliotekanauki.pl/articles/1401274.pdf
Data publikacji:
2015-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
82.47.Aa
88.80.ff
Opis:
In this study, spinel $Li_4Ti_5O_{12}$ materials were successfully synthesized by a simple and facile sol-gel process and electroless copper deposition techniques. The characteristics of the as-prepared $Li_4Ti_5O_{12}$ and $Cu-Li_4Ti_5O_{12}$ were examined by X-ray diffraction and scanning electronic microscopy, while the electrochemical performances including charge/discharge and rate performance tests were also investigated. $Cu-Li_4Ti_5O_{12}$ electrode demonstrated the superior initial discharge capacity and rate capability to $Li_4Ti_5O_{12}$ electrode, cycled between 1.0 and 2.5 V. The enhanced rate capability can be attributed to the higher $Li^{+}$ diffusivity and lower charge-transfer resistance due to the electroless deposition of copper. Moreover, when both electrodes discharged with 80 C state of discharge conditions, the reversible capacities were further increased ım70 mAh $g^{-1}$ with excellent cycling stability and almost no irreversible capability was observed during cycling.
Źródło:
Acta Physica Polonica A; 2015, 127, 4; 1026-1028
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Li-Air Batteries With EC-DEC Based Nanocomposite Electrolytes
Autorzy:
Akbulut, A.
Guler, M.
Cetinkaya, T.
Uysal, M.
Akbulut, H.
Powiązania:
https://bibliotekanauki.pl/articles/1401250.pdf
Data publikacji:
2015-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
82.45.Gj
88.80.ff
82.45.Xy
Opis:
Electrolytes based on organic carbonate solvents of ethylene carbonate (EC) and diethyl carbonate (DEC) were prepared by using LiPF₆ as the Li-source. Nano sized Al₂O₃ (50 nm) was used as a reinforcing component in order to control corrosion and Li₂CO₃ formation. Corrosion of the Li foil anode and electrochemical tests were performed by using EC/DEC/LiPF₆ and nanocomposite EC/DEC/LiPF₆/5wt.% Al₂O₃ electrolytes. Electrochemical tests were performed in the swagelok cells by using Li foil anode and carbon air cathode electrodes. Structural tests were carried out by using scanning electron microscopy (SEM), x-ray diffraction (XRD) and Raman spectroscopy. Results revealed that incorporation of nano Al₂O₃ leads to a decrease of corrosion rate of Li anode and a small decrease in the capacity of the air cells.
Źródło:
Acta Physica Polonica A; 2015, 127, 4; 1023-1025
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cr and V Substitution in the LiMn₂O₄Spinel Positive Electrode Li-Ion Batteries
Autorzy:
Akbulut, A.
Cetinkaya, T.
Guler, M.
Uysal, M.
Akbulut, H.
Powiązania:
https://bibliotekanauki.pl/articles/1401245.pdf
Data publikacji:
2015-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
82.47.Aa
81.20.Fw
81.15.-z
Opis:
In this study, $LiCr_{0.2}V_{0.4}Mn_{1.4}O_4$ cathode active electrode materials were produced via a facile sol-gel method at 800°C. The surfaces of the $LiCr_{0.2}V_{0.4}Mn_{1.4}O_4$ cathode active electrode materials were then coated with Cu in order to increase the conductivity and suppress the manganese ion dissolution into the electrolyte. The structure and electrochemical properties of the obtained Cr and V substituted LiMn₂O₄ powders were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), galvanostatic charge- discharge test and electrochemical impedance spectroscopy (EIS). The improvement in the cycling performances attributed to stabilization of spinel structure by bication ion substation and Cu coating on the spinel particles. EIS analysis confirmed that bication doping and conductive Cu coating contributed stability of the spinel electrodes and provided stable electrolyte/electrode interface due to the suppression of electrolyte decomposition
Źródło:
Acta Physica Polonica A; 2015, 127, 4; 1019-1022
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics and Electrochemical Performance of $TiO_2$:MWCNT Nanocomposite Anodes for Li-Ion Batteries
Autorzy:
Guler, M.
Cetinkaya, T.
Cevher, O.
Tocoglu, U.
Akbulut, H.
Powiązania:
https://bibliotekanauki.pl/articles/1218684.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
82.45.Mp
61.48.De
Opis:
In this study, highly porous buckypapers were manufactured via vacuum filtration techniques and nanocrystalline $TiO_2$ thin films were deposited on buckypapers using reactive radio frequency magnetron sputtering to understand the role of the deposition power. In addition, the effects of the deposition parameters on the electrochemical properties as an anode electrode for Li-ion batteries have also been studied.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 322-324
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of Tin Oxide Based Nanocomposites for Li-Ion Batteries
Autorzy:
Cevher, O.
Cetinkaya, T.
Tocoglu, U.
Guler, M.
Akbulut, H.
Powiązania:
https://bibliotekanauki.pl/articles/1399889.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
88.30.rh
81.05.Dz
81.15.Cd
82.47.Aa
Opis:
In this work, tin oxide ($SnO_2$) films were deposited on multiwall carbon nanotube buckypaper using a rf magnetron sputter process in a mixed oxygen/argon (1/9) gas environment. Conditions for the growth of $SnO_2$ thin films on multiwall carbon nanotube buckypaper by rf sputtering are: target composition $SnO_2$ (99.999 wt%); total system pressure 1 Pa; sputtering power (rf) 75, 100 and 125 W, respectively; $O_2//Ar$ (1/9) gas mixture. The surface morphology of the $SnO_2$ multiwall carbon nanotube composite films was investigated by scanning electron microscopy. The crystallographic structure of the sample was determined by X-ray diffraction. The electrochemical properties of $SnO_2$ multiwall carbon nanotube composite anodes were investigated by galvanostatic charge-discharge experiments.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 358-360
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Characterization of Antimony Doped Tin Oxide Nanocomposites for Li-Ion Batteries
Autorzy:
Guler, M.
Cevher, O.
Tocoglu, U.
Cetinkaya, T.
Akbulut, H.
Powiązania:
https://bibliotekanauki.pl/articles/1399942.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.48.De
82.45.Mp
82.47.-a
Opis:
High content carbon nanotubes mats have been produced to multi-walled carbon nanotubes. Sb doped $SnO_2$ films were then deposited by rf magnetron sputtering on buckypapers substrates. The effect of oxidation pressure on the structural, compositional, and electrochemical properties of the films was investigated.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 383-385
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Electrochemical Properties of Cu Coated $LiCr_{0.2}V_{0.2}Mn_{0.6}O_2$ Nanocomposites for High Rate Li-Ion Batteries
Autorzy:
Algul, H.
Erdas, A.
Tokur, M.
Guler, M.
Akbulut, H.
Alp, A.
Powiązania:
https://bibliotekanauki.pl/articles/1401278.pdf
Data publikacji:
2015-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
82.47.Aa
81.15.-z
88.80.ff
Opis:
Several reported problems of commercial LiCoO₂ electrode materials such as high cost, toxicity, limited rate capability and safety concerns are still remain to be problematic to develop the lithium ion consumer electronics such as mobile phones, tablets and notebook computers. In this study, an alternative nanocomposite electrode material based on $LiCr_{0.2}V_{0.2}Mn_{0.6}O_2$ and copper coated one were produced via a facile sol-gel method and electroless Cu deposition techniques. The resulting samples were characterized by X-ray diffraction (Rigaku DMax 2200 diffractometer) using a monochromatized Cu-Kα source (λ=1.5406 Å) and 2θ scan range from 10° to 80° with a speed of 1° $\text{min}^{-1}$. The scanning electron microscope (SEM) was used in order to characterize the morphology of the active materials. The as-synthesized $Cu//LiCr_{0.2}V_{0.2}Mn_{0.6}O_2$ composite cathode exhibits a stable capacity on cycling and good rate capability after 50 cycles and total capacity retention of 93% is obtained. The unique 2D structure of the composite cathode material, its good electrochemical performances and its relatively low cost comparing to LiCoO₂, make this material very promising for applications.
Źródło:
Acta Physica Polonica A; 2015, 127, 4; 1038-1041
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thin Film Nanostructured ATO and ATO Based Composite Anodes for Li-Ion Batteries
Autorzy:
Cevher, O.
Guler, M.
Tocoglu, U.
Cetinkaya, T.
Akbulut, H.
Okumus, S.
Powiązania:
https://bibliotekanauki.pl/articles/1218094.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.72.uj
88.30.rh
82.47.Aa
Opis:
In this study, antimony doped tin oxide films were deposited on multiwall carbon nanotube buckypaper and Cr coated stainless steel substrates using a radio frequency magnetron sputtering process in a mixed oxygen/argon (5/95) gas environment. The depositions of antimony doped tin oxide on the multiwall carbon nanotube buckypaper and stainless steel substrates were carried out using the parameters organized as: target composition antimony doped tin oxide ($SnO_2$:Sb = 90:10 wt%); total system pressure 1 Pa; sputtering power (RF) 100 W. The surface morphology of the antimony doped tin oxide films was investigated by field emission scanning electron microscopy. The crystallographic structure of the samples was determined by X-ray diffraction. The electrochemical properties of antimony doped tin oxide and antimony doped tin oxide-multiwall carbon nanotube nanocomposite anodes containing CR2016 cells were measured by galvanostatic charge-discharge experiments.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 296-298
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Electrochemical Performance of ZnO Films as Anode Materials for Li-Ion Batteries
Autorzy:
Cevher, O.
Cetinkaya, T.
Tocoglu, U.
Guler, M.
Akbulut, H.
Powiązania:
https://bibliotekanauki.pl/articles/1399886.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Dz
81.15.Cd
82.47.Aa
Opis:
In this work, the effect of rf power on the structural, electrical and electrochemical properties of ZnO thin films was investigated. ZnO thin films were deposited on glass and Cr coated stainless steel substrates by rf magnetron sputtering in pure Ar gas environment. ZnO thin films for different rf powers (75, 100, and 125 W) were deposited keeping all other deposition parameters fixed. ZnO thin films were used as negative electrode materials for lithium-ion batteries, whose charge-discharge properties, cyclic voltammetry and cycle performance were examined. A high initial discharge capacity about 908 mAh g^{-1} was observed at a 0.5 C rate between 0.05 and 2.5 V. The crystallographic structure of the sample was determined by X-ray diffraction. The electrical resistivity of the deposited films was measured by the four-point-probe method. The thickness of the ZnO thin films was measured using a profilometer.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 355-357
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nanocomposite ZnO:MWCNT Thin Films for Li-Ion Batteries Prepared via Reactive Magnetron Sputtering
Autorzy:
Guler, M.
Cetinkaya, T.
Cevher, O.
Tocoglu, U.
Akbulut, H.
Powiązania:
https://bibliotekanauki.pl/articles/1195252.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
82.47.Aa
61.48.De
77.55.hf
Opis:
In this study, ZnO/MWCNT buckypaper nanocomposite structures were obtained as an anode electrode material for Li-ion batteries. MWCNT based buckypapers were produced via vacuum filtration techniques and the surfaces of the buckypapers were coated with ZnO in order to increase stability and mechanical integrity during charging and discharging processes. The effect of deposition powers on the battery performance is also investigated.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 319-321
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Characterisation of Silicon/Carbon Nanotube Composite Electrodes for Li-Ion Battery Systems
Autorzy:
Cetinkaya, T.
Tocoglu, U.
Cevher, O.
Guler, M.
Akbulut, H.
Powiązania:
https://bibliotekanauki.pl/articles/1399951.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.72.uf
61.48.De
81.20.Ev
81.07.-b
Opis:
Silicon powders and different amounts of multiwalled carbon nanotube were mechanically alloyed in polyacrynitrile solution via high speed planetary ball milling. Produced composite was characterised via X-ray diffraction pattern, scanning electron microscopy, energy dispersive spectroscopy and thermogravimetric analysis.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 398-400
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-11 z 11

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies