Temat: nickel superalloys - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Creep Behaviour of Modified Mar-247 Superalloy
Autorzy:: Cieśla, M.
Mańka, M.
Binczyk, F.
Gradoń, P.
Powiązania:: https://bibliotekanauki.pl/articles/354216.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: nickel superalloys
creep
macrostructure
microstructre
Opis:: The paper presents the results of analysis of creep behaviour in short term creep tests of cast MAR-247 nickel-based superalloy samples made using various modification techniques and heat treatment. The accelerated creep tests were performed under temperature of 982 °C and the axial stresses of σ = 150 MPa (variant I) and 200 MPa (variant II). The creep behaviour was analysed based on: creep durability (creep rupture life), steady-state creep rate and morphological parameters of macro- and microstructure. It was observed that the grain size determines the creep durability in case of test conditions used in variant I, durability of coarse-grained samples was significantly higher.
Źródło:: Archives of Metallurgy and Materials; 2016, 61, 2A; 701-704
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Evaluation of Heat Capacity and Resistance to Cyclic Oxidation of Nickel Superalloys
Autorzy:: Przeliorz, R.
Binczyk, F.
Gradoń, P.
Góral, M.
Mikuszewski, T.
Powiązania:: https://bibliotekanauki.pl/articles/381534.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: foundry technology
nickel superalloys
heat resistance
DSC calorimeter
heat capacity
technologie odlewnicze
nadstop niklu
odporność na ciepło
DSC kalorymetru
pojemność cieplna
Opis:: Paper presents the results of evaluation of heat resistance and specific heat capacity of MAR-M-200, MAR-M-247 and Rene 80 nickel superalloys. Heat resistance was evaluated using cyclic method. Every cycle included heating in 1100°C for 23 hours and cooling for 1hour in air. Microstructure of the scale was observed using electron microscope. Specific heat capacity was measured using DSC calorimeter. It was found that under conditions of cyclically changing temperature alloy MAR-M-247 exhibits highest heat resistance. Formed oxide scale is heterophasic mixture of alloying elements, under which an internal oxidation zone was present. MAR-M-200 alloy has higher specific heat capacity compared to MAR-M-247. For tested alloys in the temperature range from 550°C to 800°C precipitation processes (γ′, γ′′) are probably occurring, resulting in a sudden increase in the observed heat capacity.
Źródło:: Archives of Foundry Engineering; 2014, 14, 3; 67-70
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: ATD and DSC Analysis of IN-713C and ZhS6U-VI Superalloys
Autorzy:: Binczyk, F.
Cwajna, J.
Gradoń, P.
Powiązania:: https://bibliotekanauki.pl/articles/381895.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting materials
innovative casting technologies
Nickel superalloys
ATD method
DSC method
solidification parameters
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
stopy niklu
metoda ATD
metoda DSC
parametry krzepnięcia
Opis:: Paper presents the results of ATD and DSC analysis of two superalloys used in casting of aircraft engine parts. The main aim of the research was to obtain the solidification parameters, especially Tsol and Tliq, knowledge of which is important for proper selection of casting and heat treatment parameters. Assessment of the metallurgical quality (presence of impurities) of the feed ingots is also a very important step in production of castings. It was found that some of the feed ingots delivered by the superalloy producers are contaminated by oxides located in shrinkage defects. The ATD analysis allows for quite precise interpretation of first stages of solidification at which solid phases with low values of latent heat of solidification are formed from the liquid. Using DSC analysis it is possible to measure precisely the heat values accompanying the phase changes during cooling and heating which, with knowledge of phase composition, permits to calculate the enthalpy of formation of specific phases like γ or γ′.
Źródło:: Archives of Foundry Engineering; 2017, 17, 1; 13-16
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "nickel superalloys" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język