Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Sahin, B." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Radiation Shielding Properties of Spark Plasma Sintered Boron Carbide-Aluminium Composites
Autorzy:
Buyuk, B.
Tugrul, A.
Cengiz, M.
Yucel, O.
Goller, G.
Sahin, F.
Powiązania:
https://bibliotekanauki.pl/articles/1401941.pdf
Data publikacji:
2015-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
25.20.Dc
81.05.Je
Opis:
In this study gamma and neutron attenuation properties of boron carbide-aluminium (B₄C-Al) composites were investigated. B₄C-Al composites were produced by spark plasma sintering method. Aluminum percentages in the B₄C-Al composites were 0%, 10%, 15%, and 20% by volume. The composite materials were performed against gamma and neutron sources. Cs-137 and Co-60 gamma radioisotopes were used as gamma sources and Pu-Be neutron howitzer was used for neutron source. Theoretical mass attenuation coefficients were determined by using XCOM computer code and compared with the experimental results. It has been seen that the experimental results were close to the theoretical results. Total macroscopic cross-sections of the samples were determined for Pu-Be neutrons. It is concluded that increasing aluminum ratio in the B₄C-Al composites causes higher gamma attenuation behavior for Cs-137 and Co-60 gamma sources and the total macroscopic cross-sections of the B₄C-Al composites decrease by increasing Al concentration.
Źródło:
Acta Physica Polonica A; 2015, 128, 2B; B-132-B-134
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spark Plasma Sintering of Boron Carbide Ceramics Using Different Sample Geometries and Dimensions
Autorzy:
Cengiz, M.
Yavas, B.
Celik, Y.
Goller, G.
Yucel, O.
Sahin, F.
Powiązania:
https://bibliotekanauki.pl/articles/1216387.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.20.Ev
81.05.Je
Opis:
$B_4C$ ceramics were fabricated by spark plasma sintering technique at 1700°C-1800C for 5 min under applied pressure of 50 MPa under vacuum atmosphere. Two different grades of $B_4C$ powder from H.C. Starck Company namely HP grade and HS grade were used in all related experiments. Effect of sample geometry and dimensions as well as sample thickness on sintering parameters were analyzed. Samples having 5 mm thickness and 50 mm diameter, 8 mm thickness in circular geometries and 50 × 50 square cross-section, 8 mm thickness were fabricated. Using the powder, which provided the densest sample, yttrium oxide $(Y_2O_3)$ was added, mixed and sintered. Optimization of SPS method production parameters for pure $B_4C$ samples and $B_4C$ samples with 5 wt% yttrium oxide additive were accomplished. The effect of geometry on density, Vickers hardness, fracture toughness, and microstructure were examined. The hardness and fracture toughness values of the samples were evaluated by the Vickers indentation technique.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 260-262
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Processing, Mechanical and Nuclear Characterization of Boron Carbide Ceramics Consolidated by Spark Plasma Sintering
Autorzy:
Cengiz, M.
Ozer, S.
Buyuk, B.
Tugrul, A.
Yucel, O.
Goller, G.
Sahin, F.
Powiązania:
https://bibliotekanauki.pl/articles/1401969.pdf
Data publikacji:
2015-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
25.20.Dc
81.20.Ev
Opis:
Boron carbide (B₄C) ceramics were produced by spark plasma sintering technique with 5, 10, 15, and 20 vol.% aluminum (Al) in order to improve sintering behaviours of B₄C ceramics. B₄C ceramics were produced, having square cross-section and 50 × 50 × 5 mm³ dimensions. The sintering process was carried out at different temperatures by applying 40 MPa of pressure with 100°C/min under vacuum. The effects of various amounts of Al additive and sintering temperature on density, vickers hardness, fracture toughness and microstructure were examined. The hardness and fracture toughness of the samples were evaluated by the Vickers indentation technique. Microstructures of the samples were characterized by scanning electron microscopy technique. Fast neutron attenuation properties of the ceramics having highest density were also investigated.
Źródło:
Acta Physica Polonica A; 2015, 128, 2B; B-187-B-189
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies