Autor: Kulczycki, A. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Discussion over correctness of methods used for test of resistance fuels to ageing processes
Autorzy:: Dzięgielewski, W.
Kulczycki, A.
Powiązania:: https://bibliotekanauki.pl/articles/241909.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: fuel
storage
fuel aging
Opis:: Research of usefulness of fuels for long-term storage is an important research of products of special use (meant for stock keeping as national or military reserves). Important fact is that fuels after storage should be used according to their initial use so their phisico-chemical and exploratory properties should remain the same during the whole storage cycle. Basic condition, enabling to foreseen that fuel will keep its quality at sufficient level in certain timeframe should be positive results of ageing tests. Below the doubts are presented whether methodology of evaluation is correct because of important differences in mechanisms of accelerated laboratory tests as well as real storage in typical conditions of storage tanks with large capacity. Differences in courses of chemical reactions and conditions of their initiation and course were pointed out. Scheme of equipment for marking content of existing gums, scheme of equipment for testing induction period, scheme of filtering and oxidizing equipment to test resistance of fuel to oxidation, effectiveness of collisions of molecules of reactants, scheme of chemical ageing process of fuels storaged in different temperature, function for different conditions ageing process of FAME, influence of value of potential molecules energy on initializing of chemical reactions are presented in the paper.
Źródło:: Journal of KONES; 2014, 21, 4; 103-109
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Low temperature properties of fuel mixtures of kerosene and fame type used to supply turbine engines in marine and other non-aeronautical applications
Autorzy:: Dzięgielewski, W.
Gawron, B.
Kulczycki, A.
Powiązania:: https://bibliotekanauki.pl/articles/260024.pdf
Data publikacji:: 2015
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: jet fuel
biocomponents
marine turbine engine
low temperature properties
Opis:: A worldwide trend to popularise gradually increasing use of biofuels in various applications was a motivation for gaining interest in FAME as a commonly available biocomponent to fuels combusted in turbine engines. These engines are mainly used in aeronautics, but many of them are also used in other, non-aeronautical areas, including marine navigation. Specific conditions in which fuels are combusted in turbine engines used in these applications are the reason why fuel mixtures of kerosene and FAME type should reveal relevant low temperature characteristics. The article presents results of tests of low temperature properties of mixtures of the jet fuel Jet A-1 and methyl esters of higher fatty acids (FAME). The prepared mixtures contained different contents of FAME. The obtained results present changes of: viscosity, cloud point, pour point, crystallising point, and cold filter plugging point, depending on the percentage by volume of FAME. They also prove that the course of changes of low temperature properties of these mixtures is affected by chemical structure of the biocomponent.
Źródło:: Polish Maritime Research; 2015, 2; 101-105
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Impact of the additives used in mineral jet fuels on the lubricating properties of synthetic fuels for turbine aircraft engines
Autorzy:: Dzięgielewski, W.
Kaźmierczak, U.
Kulczycki, A.
Ozimina, D.
Powiązania:: https://bibliotekanauki.pl/articles/245539.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: lubricity
fuels for turbine aircraft engines
synthetic components
additives
Opis:: Hydrocarbon containing synthetic fuels represent a promising alternative fuels. Despite different chemical compositions, their properties should be similar to properties of mineral fuels, as they are designed for the same drive units. The basic parameter related to the protection of the adequate service life of the power supply devices, including precision pairs, is lubricity. Lubricity depends on a number of factors, including these related to the chemical composition of fuel components and operating additives introduced into fuels in order to modify their properties. The preliminary results of research on the effect of additives: lubricating, anti-corrosion and anti-electrostatic once, on the lubricating properties of a synthetic fuel are shown in the paper. It was observed that there are relations between the content of additives and the dynamics of film formation. It is significant that this does not apply only to the lubricating additive, but also the additive, which protects the correct electrostatic balance by providing sufficiently high electrical conductivity of the fuel. This may indicate that the formation of a lubricating film remains in relation to the intensity of energy transport from the lubricated surface to the molecules of lubricating additives inside the film. The results shown in the paper preliminary confirm the hypothesis, that synthetic components of fuels change the concentration of ordered molecular structures (which are present in mineral part of fuels and which can be responsible for energy transport inside the lubricating film), what resulted in worse fuel ability to create protective film, and anti-electrostatic additive improves lubricity of blends of synthetic and mineral components.
Źródło:: Journal of KONES; 2018, 25, 2; 121-128
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Butanol/biobutanol as a component of an aviation and diesel fuel
Autorzy:: Dzięgielewski, W.
Gawron, W.
Kaźmierczak, U.
Kulczycki, A.
Powiązania:: https://bibliotekanauki.pl/articles/247384.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: aviation
diesel fuels
biocomponents
CO2 emission
Opis:: This paper describes the analysis and conclusions regarding the use of butanol/biobutanol as a component of conventional mineral fuels employed in different areas of transportation. Butanol from biomass - biobutanol is interesting as biocomponent of gasoline, diesel fuel as well as aviation fuels. This is especially important in case of air transport, which is the carbon dioxide emission source of the fastest growth. Biobutanol is tested as biocomponent of gasoline, including aviation ones, but there are no information about biobutanol added to mineral Jet fuel as well as diesel fuel. Direction of research conducted by leading aviation companies indicates that hydrocarbon biocomponent will be main biofuel used as aviation turbine fuel. One of reported technology is focused on use of butane-1-ol as semi-finished products for isoparaffinic hydrocarbons generation that then would be used for aviation turbine fuels production. In order to do such analysis the preliminary lab testing of blends of butanol isomers with aviation fuel Jet A-1 and diesel fuel were performed. The paper contains the results of standard tests for blends of mineral fuels with butane-1-ol and butane-2-ol added in concentration of 0-20 %(V/V). Both the advantages and disadvantages regarding the use of such component of mineral fuels are presented. Butanol decreases value of flash point and significantly influence on conductivity of Jet fuel. In case of aviation fuel for turbine engines, and diesel fuel, the restrictions regarding direct use of butanol are important. However, butanol can be treated as semi-finished material for synthesizing of biohydrocarbons used in above applications.
Źródło:: Journal of KONES; 2014, 21, 2; 69-75
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The role of molecularly ordered structures in energy transport enhancement during combustion process : a new conception of a reaction mechanism of fuel components oxidation
Autorzy:: Białecki, T.
Dzięgielewski, W.
Gawron, B.
Kaźmierczak, U.
Kulczycki, A.
Powiązania:: https://bibliotekanauki.pl/articles/245703.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: molecular clusters
turbojet engine
butanol
combustion process
carbon oxide emission
Opis:: This article presents the results of investigations focused on the role of molecularly ordered structures (molecular clusters) on combustion process. The proposed new mechanism of the reactions initiation takes into account the role of molecular clusters in energy (heat and energy of electrons emitted by the surface of the walls of combustion chamber) conductivity regulation. Literature survey shows that molecular clusters created by aromatic hydrocarbons are responsible for particulate matter. The combustion process itself is not uniform in whole combustion chamber. Such diversity, caused mainly by heterogeneous thermal state of combustion chamber is recognized as significant reason to create various products of combustion including carbon oxides, carbon dioxides and nitrogen oxides. Jet fuel and its blends with n-butanol and biobutanol in concentration from 10 to 75 % (V/V) were subjected to laboratory tests. Such blends were also tested on the test rig with a miniature turbojet engine – MiniJETRig. Engine operating parameters and carbon oxide emission were measured. The relations between electrical conductivity and parameters of engine test (e.g. temperature in selected points in combustion chamber) were assessed. Engine tests were carried out according to specific profile of engine test, which models different engine operating modes. The results of experimental investigations, shown in the article, initially confirm the proposed mechanism of the oxidation reactions initiation during combustion process.
Źródło:: Journal of KONES; 2018, 25, 4; 17-24
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: The method, based on storage simulator and IR – VIS spectroscopy, for predicting the allowable time of storage of biocomponents for CI engines
Autorzy:: Dzięgielewski, W.
Kaźmierczak, U.
Kulczycki, A.
Okniński, R.
Stefanowicz, P.
Powiązania:: https://bibliotekanauki.pl/articles/242434.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: fuel
fuel aging
oils
lubrication
biocomponents
Opis:: The paper presents the results of investigations concerning a new method used for predicting the allowable time of storage of biocomponents – FAME. The method was based on laboratory research carried out with the use of a storage tank simulator. The aging process was carried out in the conditions increasing the reaction rate – at high temperature. There are several methods/procedures used for predicting the allowable time of storage of fuels and biocomponents – FAME, but all of them are based on tests at the temperature so high that the mechanism of aging process is different than the one observed in storage tanks. It was assumed that the aging process could be divided into two stages: at the first stage, the aging precursors are created and at the second stage, precursors are converted into the fuel aging products. These products lead to changes in fuel properties. The kinetics of precursor creation determines the rate of all reactions, which lead to the final aging products. It was found that the rate of reaction at the first stage of fuel aging can be effectively increased by an increase in temperature and even relatively high temperature does not change the mechanism of the creation of aging precursors. The method that has been worked out makes it possible to control the mechanism of aging process during quick laboratory tests. The products of aging processes were detected with the use of the IR-VIS spectrometry. The allowable time of storage was determined for several FAME samples on the basis of quick laboratory tests. The results of laboratory quick tests were verified by comparing them with the results of the aging process of FAME in storage tanks. On the basis of the test results, the algorithm of allowable time of FAME storage calculation was worked out.
Źródło:: Journal of KONES; 2016, 23, 1; 115-121
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: The new stand for aging of biocomponents and biofuels process testing at relatively short time
Autorzy:: Dzięgielewski, W.
Kaźmierczak, U.
Kulczycki, A.
Okniński, R.
Stefanowicz, P.
Powiązania:: https://bibliotekanauki.pl/articles/949517.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: biofuels
biocomponents
ageing process
test bench
method of measuring
Opis:: In the paper, the concept of a model bench for accelerated ageing of bio-components and biofuels was presented. It is used to simulate the ageing process of biofuels and components of vegetable or animal origin, taking place during storage in the storage tanks. The construction of the bench’s essential elements and its equipment were designed and implemented in such a way as to mostly reflect actual storage conditions in large capacity tanks. An additional and unprecedented function of the bench includes the possibility to simulate the product transport conditions. Furthermore, a method of the test, with the use of simultaneously performed traditional tests on the physical and chemical properties monitored in the process of storage was presented. An analysis of the relation between values of the parameters obtained with different methods (on the model bench and under laboratory conditions) was conducted. In addition, their usefulness to assess the impact of logistic processes on the product quality was presented. In the paper, the results of the work executed within the framework of the project “Development of a prototype of the monitoring system the ageing rate and degree of bio-components and biofuels” within the Program Innovative Economy Operational Programme, Measure 1.4. “Support for goal-oriented projects” were used.
Źródło:: Journal of KONES; 2016, 23, 2; 105-112
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Procesy starzenia chemicznego biokomponentów do paliw silnikowych w warunkach przechowywania w zbiornikach magazynowych
Chemical aging of biocomponents for motor fuels during storage in tanks
Autorzy:: Dzięgielewski, W.
Karp, G.
Kaźmierczak, U.
Kulczycki, A.
Okniński, R.
Stefanowicz, P.
Powiązania:: https://bibliotekanauki.pl/articles/251284.pdf
Data publikacji:: 2015
Wydawca:: Instytut Naukowo-Wydawniczy TTS
Tematy:: paliwo silnikowe
zbiornik magazynowy
biokomponent
starzenie
motor fuel
storage tank
biocomponent
ageing
Opis:: artykule omówiony został problem starzenia chemicznego biokomponentów do paliw silnikowych. Problem ten stał się ważny dla jakości benzyn i oleju napędowego w sytuacji powszechnego dodawania bioetanolu i FAME. Badaniami objęto bioetanol i FAME przechowywane w różnych warunkach w laboratorium. Zastosowano do oce-ny stopnia zestarzenia biokomponentów standardowe metody badań oraz analizę spektroskopową w zakresie IR i chromatografię gazową. Przedstawiono wyniki badań bioetanolu i FAME przechowywanych przez 1 rok oraz wyniki analiz próbek bioetanolu i FAME przechowywanych w warunkach laboratoryjnych w różnych warunkach. W wyniku przeprowadzonych badań stwierdzono, że proces starzenia bioetanolu przebiega poprzez aldehyd octowy i acetal, a FAME trójetapowo poprzez epitlenki i nadtlenki. Stwierdzono także, że zanieczyszczenia biokomponentów, tj. woda i stałe produkty korozji zbiorników magazynowych przyspieszają procesy starzenia biokomponentów.
The article explains the chemical processes responsible for aging of biocomponents during their storage. This problem is import ant for quality of gasolines and diesel fuel. The study involved bioethanol and FAME stored under different conditions in the laboratory. The standard methods and IR spectroscopy as well as gas chromatography were use for aging processes assessment. The obtained results showed that aging process of bioethanol runs through aldehyde and acetal. Aging of FAME runs through three stages which comprise epioxides and peroxides. It was found that water as well as solid contaminants increase the ratio of aging processes of bioethanol and FAME.
Źródło:: TTS Technika Transportu Szynowego; 2015, 12; 473-477, CD
1232-3829
2543-5728
Pojawia się w:: TTS Technika Transportu Szynowego
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Problems in fuelling spark ignition engines with dimethyl ether
Autorzy:: Kruczyński, S. W.
Ślęzak, M.
Gis, W.
Orliński, P.
Kulczycki, A.
Dzięgielewski, W.
Bednarski, M.
Powiązania:: https://bibliotekanauki.pl/articles/133662.pdf
Data publikacji:: 2017
Wydawca:: Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:: alternative fuels
fuel system
paliwa alternatywne
system paliwowy
Opis:: This paper discusses briefly the production technology of dimethyl ether, taking into account plant raw materials and the physical and chemical properties of DME as compared to diesel fuel. The benefits and disadvantages of DME as a fuel are presented and changes in the emission of harmful substances characterised as compared to the combustion of diesel fuel. Also, basic usage problems are addressed, e.g. the wear of engine’s elements, cavity and leakages in the fuel system.
Źródło:: Combustion Engines; 2017, 56, 3; 154-158
2300-9896
2658-1442
Pojawia się w:: Combustion Engines
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Kulczycki, A." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język