Temat: FE Analysis - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Load carrying capacity numerical study of I-beam pillar structure with blast protective panel
Autorzy:: Mazurkiewicz, L.
Kolodziejczyk, D.
Damaziak, K.
Malachowski, J.
Klasztorny, M.
Baranowski, P.
Powiązania:: https://bibliotekanauki.pl/articles/202056.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: FE analysis
blast protection
stability study
Opis:: The paper presents numerical analyses aimed at preliminary assessment of the protective panel effectiveness, which task is to protect the elements of building structures against explosion. For the criterion of assessing the effectiveness of the panel the load capacity of the column made of steel I-beam was chosen. Ultimate force was determined by using advanced computational procedure, which consisted of four stages: preload, blast simulation, dynamic response and static analysis of deformed structure. Blast load was simulated using Lagrangian- Eulerian domain coupling. Results indicated that the application of the protective panel significantly reduces the plastic deformation of the structure.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2013, 61, 2; 451-457
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Dynamic testing of copper material : numerical approach
Autorzy:: Baranowski, P.
Małachowski, J.
Mazurkiewicz, Ł.
Damaziak, K.
Powiązania:: https://bibliotekanauki.pl/articles/387353.pdf
Data publikacji:: 2013
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:: miedź
sprężanie
analiza elementów skończonych
SHPB
copper
compression
FE analysis
Opis:: Split Hopkinson pressure bar (SHPB) is one of the most important and recognisable apparatus used for characterizing the dynamic behaviour of various materials. Incident pulse generated one the incident bar usually have a rectangular shape, which is proper for some materials but for others is not. Therefore, several methods of shaping the incident pulse are used for obtaining constant strain rate conditions during tests. Very often pulse shapers made of copper or similar material are implemented due to its softness properties. In this paper such material was investigated using the FE model of SHPB. Its mechanical behaviour was characterised with and without copper disc between the striker and incident bar. Numerical simulations were carried out using explicit LS-DYNA code. Two different methods were used for modelling the copper sample: typical finite Lagrangian elements and meshless Smoothed Particle Hydrodynamics (SPH) method. As a result of two techniques used axial stress-strain characteristics were compared for three different striker’s velocity with an influence of the copper pulse shaper taking into account. Finally, FE and SPH method was compared with taking into consideration: the efficiency, computer memory and power requirements, complexity of methods and time of simulation.
Źródło:: Acta Mechanica et Automatica; 2013, 7, 4; 195-202
1898-4088
2300-5319
Pojawia się w:: Acta Mechanica et Automatica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Identification of layers distribution in the composite coupon using finite element method and three point bending test
Autorzy:: Mazurkiewicz, Ł.
Małachowski, J.
Damaziak, K.
Baranowski, P.
Gotowicki, P.
Powiązania:: https://bibliotekanauki.pl/articles/387164.pdf
Data publikacji:: 2013
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:: fibre reinforced composite
FE analysis
hand lay-up technique
experimental validation
kompozyt włóknisty
analiza elementów skończonych
weryfikacja doświadczalna
Opis:: The main objective of the study is to develop experimentally validated FE model and perform numerical analysis of layered composites made by hand lay-up techniques during tension and bending test. The research object is glass - polyester laminate made of four unidirectional layers. In order to validate the numerical models experimental test were performed. Due to the very different stiffness modulus in tension and bending loading the material properties obtained from standard test are not suitable to apply in numerical model. Significantly different behaviour compared to experimental test was obtained for tree point bending where the numerical model becomes too stiff. Simple coupons, relatively easy to manufacture presented in the paper have very low quality. The differences in actual and theoretical bending stiffness (obtained from tension stiffness) exceed 70%. In order to represent the actual structure the layers of the composite were divided by resin layers and also additional resin layer at the top and bottom of the model were defined. Single stage optimization process was used to adjust the material layout. After layer set-up modification very significant improvement can be seen for flexural behaviour.
Źródło:: Acta Mechanica et Automatica; 2013, 7, 3; 160-165
1898-4088
2300-5319
Pojawia się w:: Acta Mechanica et Automatica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "FE Analysis" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język