Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Lee, C. H." wg kryterium: Wszystkie pola


Wyświetlanie 1-3 z 3
Tytuł:
Development of Carbon Nanotube Based Reflection Type X-ray Source
Autorzy:
Choi, H.
Kim, J.
Lee, C.
Powiązania:
https://bibliotekanauki.pl/articles/1807922.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.47.Lx
75.47.Gk
73.50.Fq
Opis:
X-ray imaging technology is a useful and leading medical diagnostic tool for health care professionals to diagnose disease in human body. Carbon nanotube based X-ray source, which we have developed in this study, could be also useful and supply integrated diagnostic X-ray imaging tool in diagnosis. Conventionally, thermionic type of tungsten filament X-ray tube is widely employed in the field of biomedical and industrial application fields. However, intrinsic problems, such as poor emission efficiency, low imaging resolution, and high electrical energy consumption etc., may cause the limitation of using the X-ray tube. To fulfill the current market requirement, specifically for medical diagnostic field, we have developed rather a portable and compact carbon nanotube based X-ray device in which microfocus high imaging resolution can be feasible.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 1078-1080
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Double Step Sintering Behavior Of 316L Nanoparticle Dispersed Micro-Sphere Powder
Dwuetapowe spiekanie mikrosferycznych nanocząstek proszku 316L
Autorzy:
Jeon, B.
Sohn, S. H.
Lee, W.
Han, C.
Kim, Y. D.
Choi, H.
Powiązania:
https://bibliotekanauki.pl/articles/355221.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
316L stainless steel
nanoparticle dispersed micro-sphere
pulse wire explosion
sintering
stal nierdzewna 316L
spiekanie dwuetapowe
mikrosferyczne nanocząstki
Opis:
316L stainless steel is a well-established engineering material and lots of components are fabricated by either ingot metallurgy or powder metallurgy. From the viewpoints of material properties and process versatility, powder metallurgy has been widely applied in industries. Generally, stainless steel powders are prepared by atomization processes and powder characteristics, compaction ability, and sinterability are quite different according to the powder preparation process. In the present study, a nanoparticle dispersed micro-sphere powder is synthesized by pulse wire explosion of 316L stainless steel wire in order to facilitate compaction ability and sintering ability. Nanoparticles which are deposited on the surface of micro-powder are advantageous for a rigid die compaction while spherical micro-powder is not to be compacted. Additionally, double step sintering behavior is observed for the powder in the dilatometry of cylindrical compact body. Earlier shrinkage peak comes from the sintering of nanoparticle and later one results from the micro-powder sintering. Microstructure as well as phase composition of the sintered body is investigated.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1155-1158
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxide Formation In Metal Injection Molding Of 316L Stainless Steel
Tworzenie tlenków podczas wtryskiwania proszku stali nierdzewnej 316L
Autorzy:
Jang, J. M.
Lee, W.
Ko, S.-H.
Han, C.
Choi, H.
Powiązania:
https://bibliotekanauki.pl/articles/351352.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powder injection molding
sintering
316L stainless steel
sintering atmosphere
micro parts
wtryskiwanie proszku
spiekanie
stal nierdzewna 316L
mikro-część
Opis:
The effects of sintering condition and powder size on the microstructure of MIMed parts were investigated using water-atomized 316L stainless steel powder. The 316L stainless steel feedstock was injected into micro mold with micro features of various shapes and dimensions. The green parts were debound and pre-sintered at 800°C in hydrogen atmosphere and then sintered at 1300°C and 1350°C in argon atmosphere of 5torr and 760torr, respectively. The oxide particles were formed and distributed homogeneously inside the sample except for the outermost region regardless of sintering condition and powder size. The width of layer without oxide particles are increased with decrease of sintering atmosphere pressure and powder size. The fine oxides act as the obstacle on grain growth and the high sintering temperature causes severe grain growth in micro features due to larger amount of heat gain than that in macro ones.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1281-1285
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies