Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Chang, C." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Effect Of Heat-Treatment On Microstructure And Magnetic Properties Of Nanocrystallized Mn-Zn Ferrite Powders
Wpływ obróbki cieplnej na mikrostrukturę i właściwości magnetyczne nanokrystalicznych proszków ferrytu Mn-Zn
Autorzy:
Lee, W. H.
Hong, C. S.
Chang, S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/351552.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high energy ball milling
nanosized particles
crystallite size
magnetic properties
frezowanie kulowe
nanocząstki
wielkości krystalitów
właściwości magnetyczne
Opis:
The initial ferrite powders were subjected to high energy ball milling at 300rpm for 3h, and subsequently heat-treated at 573-1273K for 1h. Based on the observation of microstructure and measurement of magnetic properties, the heat-treatment effect was investigated. The size of initial powders was approximately 70μm. After milling, the powders with approximately 230nm in size were obtained, which were composed of the nano-sized particles of approximately 15nm in size. The milled powders became larger to approximately 550nm after heat-treatment at 973K. In addition, the size of particles increased to approximately 120nm with increasing temperature up to 973K. The coercivity of initial powders was almost unchanged after milling, whereas the saturation magnetization increased. As the heat-treatment temperature increased, the saturation magnetization gradually increased and the maximum coercivity was obtained at 773K.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1347-1350
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Self-Consolidation Mechanism Of Porous Ti-6Al-4V Implant Prototypes Produced By Electro-Discharge-Sintering Of Spherical Ti-6Al-4V Powders
Mechanizm autokonsolidacji prototypów porowatych implantów wytworzonych przez spiekanie sferycznych proszków Ti-6Al-4V
Autorzy:
Lee, W. H.
Jo, Y. J.
Kim, Y. H.
Jo, Y. H.
Seong, J. G.
Van Tyne, C. J.
Chang, S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/356277.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ti-6Al-4V
implant
porous
sintering
electrodischarge
porowatość
spiekanie
proszki spiekane
Opis:
Electro-Discharge-Sintering (EDS) was employed to fabricate Ti-6Al-4V porous implant prototypes from atomized powders (100 – 150 μm), that were subjected to discharges of 0.75 to 2.0 kJ/0.7g-powder from 150, 300, and 450 μF capacitors. Both fully porous and porous-surfaced Ti-6Al-4V compacts with various solid core sizes were self-consolidated in less than 86 – 155 μsec. It is known that EDS can simultaneously produce the pinch pressure to squeeze and deform powder particles and the heat to weld them together. The formation of a solid core in these prototypes depends on the amounts of both the pinch pressure and heat generated during a discharge. The size of the solid core and the thickness of the porous layer can be successfully controlled by manipulating the discharge conditions such as input energy and capacitance.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1185-1189
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Modification of Self-Consolidated Microporous Ti Implant Compacts Fabricated by Electro-Discharge-Sintering in Air
Autorzy:
Jo, Y. J.
Yoon, Y. H.
Kim, Y. H.
Chang, S. Y.
Kim, J. Y.
Lee, Y. K.
Van Tyne, C. J.
Lee, W. H.
Powiązania:
https://bibliotekanauki.pl/articles/356790.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium
implant
porous
sintering
X-ray photoelectron spectroscopy (XPS)
Opis:
A single pulse of 0.75-2.0 kJ/0.7g of atomized spherical Ti powders from 300 mF capacitor was applied to produce a microporous Ti implant compact by electro-discharge-sintering (EDS). A solid core in the middle of the compact surrounded by a microporous layer was found. X-ray photoelectron spectroscopy was employed to study the surface characteristics of the EDS Ti compact and it revealed that Ti, C and O were the main constituents on the surface with a smaller amount of N. The surface was lightly oxidized and was primarily in the form of TiO2 resulting from the air oxidation during EDS processing. The lightly oxidized surface of the EDS compact also exhibited Ti nitrides such as TiN and TiON, which revealed that the reaction between air constituents and the Ti powders even in times as short as 128 msec.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1287-1291
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies