Temat: coordinate measuring - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Automated measurement of bevel gears of the aircraft gearbox using GOM
Autorzy:: Marciniec, A.
Budzik, G.
Dziubek, T.
Powiązania:: https://bibliotekanauki.pl/articles/247190.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gear
aircraft gearbox
coordinate measuring technique
Opis:: Manufacture of aircraft gearbox elements requires control of gear geometric parameters at different stages of technological process. Acceleration and automation of measurement process can affect the duration of the finished item production. In case of measurement of gear wheels using modern technologies based on numerical machines, measurement process is based on processing of numerical data obtained by measurement using coordinate measuring machines. The goal of this paper is to present the opportunity to automate the measurement process of bevel gears, using coordinated optical scanner ATOS by GOM, equipped with a turntable. Using coordinate measuring technique, you can specify a set of methods and procedures for the designation of the complex dimensions of physical objects and transform them into a computer program space of coordinate measuring devices. The topics included in the article are intended to show the capabilities of the device used to improve the measurement process and shorten its time, and hence, lower its costs. Another thing described in the paper is the impact of measurement performance in automatic mode on the quality of performance - the numerical image of scanned surface, from the standpoint of accuracy and number of collected data points in the shortest time. The article includes an analysis of conditions related to the measurement works, such as the process of preparing the model and measurement equipment and data processing capacity. The result of the work will be presented methodology for automated scanning measurements of bevel Sears.
Źródło:: Journal of KONES; 2011, 18, 4; 259-264
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Automated measurement of bevel gears of the aircraft gearbox using GOM
Autorzy:: Marciniec, A.
Budzik, G.
Dziubek, T.
Powiązania:: https://bibliotekanauki.pl/articles/242283.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gear
aircraft gearbox
coordinate measuring technique
Opis:: Manufacture of aircraft gearbox elements requires control of gear geometric parameters at different stages of technological process. Acceleration and automation of measurement process can affect the duration of the finished item production. In case of measurement of gear wheels using modern technologies based on numerical machines, measurement process is based on processing of numerical data obtained by measurement using coordinate measuring machines. The goal of this paper is to present the opportunity to automate the measurement process of bevel gears, using coordinated optical scanner ATOS by GOM, equipped with a turntable. Using coordinate measuring technique, you can specify a set of methods and procedures for the designation of the complex dimensions of physical objects and transform them into a computer program space of coordinate measuring devices. The topics included in the article are intended to show the capabilities of the device used to improve the measurement process and shorten its time, and hence, lower its costs. Another thing described in the paper is the impact of measurement performance in automatic mode on the quality of performance - the numerical image of scanned surface, from the standpoint of accuracy and number of collected data points in the shortest time. The article includes an analysis of conditions related to the measurement works, such as the process ofpreparing the model and measurement equipment and data processing capacity. The result of the work will be presented methodology for automated scanning measurements of bevel Sears.
Źródło:: Journal of KONES; 2011, 18, 2; 287-292
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Optical measurement of aircraft engine turbine blades
Autorzy:: Budzik, G.
Kubiak, K.
Rokicki, P.
Dziubek, T.
Nowotnik, A.
Matysiak, H.
Cygan, R.
Tutak, M.
Boś, P.
Powiązania:: https://bibliotekanauki.pl/articles/247470.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: aircraft engines turbine blades
optical measurements
coordinate measuring technique
Opis:: Manufacturing of aircraft engine turbine blades requires control of blade geometric parameters at different stages of technological process. Acceleration and automation of measurement process can affect the duration of the finished item production. Modern technologies for measurement of aircraft engine turbine blades are based on numerical machines - measurement process is based on processing of numerical data obtained by measurement using coordinate measuring machines. The paper presents the opportunity of automation of aircraft engine turbine blades measurements using scanner ATOS II Triple Scan with blue light source technology. Coordinate measuring technique allows to specify full methodology for designation of complex dimensions of physical objects and transform them into a computer program space of coordinate measuring devices. Presented paper includes capabilities of device used in the study to improve the measurement process in the technological and economical aspects. Another issue described in the paper is impact of measurement performance in automatic mode on the quality of performance – the numerical model of surface, from the standpoint of accuracy and number of collected data points in time. The paper includes an analysis of conditions related to the measurement works, such as the process of preparing the model, measurement equipment and data processing capacity. As the result methodology for automated scanning measurements of aircraft engine turbine blades will be presented.
Źródło:: Journal of KONES; 2013, 20, 2; 21-26
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Application of rapid prototyping - SLA, FDM - to manufacture model of aircraft wheel hub
Autorzy:: Śliwa, R. E.
Budzik, G.
Bernaczek, J.
Powiązania:: https://bibliotekanauki.pl/articles/247450.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: aircraft wheel hub
rapidprototyping (RP - SLA, FDM)
prototype
coordinate measuring
Opis:: Implementation of prototypes of the aircraft is a complex process - which requires a series of operations on data preparation, maintenance and inspection of the measuring apparatus. The development overlooks the stage of design and CAD modelling which is the subject of separate publications, and presents only issues related to the RP process - the SLA and FDM. Special attention was paid to the need to properly export to CAD models as STL and subseąuent analysis of the surface after tessellation (preview generated triangle mesh describing the model). The process of preparing data in dedicated utility software is a key step for the correct implementation of the prototype aircraft wheel hub. The correct position of the working models on the platform, generated automatically supports editing and verification output files (simulation analysis of overlapping layers) minimizes the risk of damage during the prototyping process itself as well as the subsequent finishing. The final chapter presents the coordinate measuring of made prototypes that will help identify areas of application methods of RP in the aerospace industry. Prototype SLA is marred by a higher error than the FDM model but allows for effective finishing operations, which eliminates the geometric errors and significantly improves the quality of the surface.
Źródło:: Journal of KONES; 2010, 17, 3; 423-429
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The determination of accuracy of test gear wheel for aeronautical dual - power path gear before heat treatment
Autorzy:: Dziubek, T.
Budzik, G.
Kozik, B.
Sobolewski, B.
Powiązania:: https://bibliotekanauki.pl/articles/241821.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gear
aircraft gearbox
coordinate measuring technique
dual-power path gear
Opis:: Manufacture of aircraft gearbox elements requires control of gear geometric parameters at different stages of technological process. In case of measurement of gear wheels using modern technologies based on numerical machines, measurement process is based on processing of numerical data obtained by measurement using coordinate measuring machines. The goal of this paper is to present the measurement process of gears, using coordinated optical scanner ATOS II TripleScan by GOM, equipped with a turntable. The aim of this study is to develop and execute the analysis accuracy of the geometry of the gear of aeronautical dual-power path gear after the roughing operation using optical coordinate measuring methods. Executed research will enable the detection of errors occurring in the machining process and to determine the value of founded the machining allowance finishing in relation to the CAD model. Using coordinate measuring technique, one can specify a set of methods and procedures for the designation of the complex dimensions of physical objects and transform them into a computer program space of coordinate measuring devices. On this basis, it is possible to determine the accuracy of the gear wheel as the workpiece prior to heat treatment. The results will be the basis to determine the effect of heat treatment on changes in the geometry of the gear and the benchmark for determining the correctness of the finishing.
Źródło:: Journal of KONES; 2013, 20, 2; 83-90
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Accuracy of the photogrametric measuring system for large size elements
Autorzy:: Grzelka, M.
Budzik, G.
Marciniak, L.
Gapiński, B.
Powiązania:: https://bibliotekanauki.pl/articles/379891.pdf
Data publikacji:: 2011
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: photogrammetry
coordinate measuring technique
maximum permissible error
size measurement
optical coordinate measuring system
fotogrametria
współrzędnościowa technika pomiarowa
błąd maksymalny dopuszczalny
pomiar wielkości
optyczna współrzędnościowa technika pomiarowa
Opis:: The aim of this paper is to present methods of estimating and guidelines for verifying the accuracy of optical photogrammetric measuring systems, using for measurement of large size elements. Measuring systems applied to measure workpieces of a large size which often reach more than 10000mm require use of appropriate standards. Those standards provided by the manufacturer of photogrammetric systems are certified and are inspected annually. To make sure that these systems work properly there was developed a special standard VDI / VDE 2634, "Optical 3D measuring systems. Imaging systems with point - by - point probing. " According to recommendations described in this standard research on accuracy of photogrametric measuring system was conducted using K class gauge blocks dedicated to calibrate and test accuracy of classic CMMs. The paper presents results of research of estimation the actual error of indication for size measurement MPE_E for photogrammetric coordinate measuring system TRITOP.
Źródło:: Archives of Foundry Engineering; 2011, 11, 2 spec.; 75-80
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Accuracy of the element geometry mapping using non-invasive computer tomography method
Autorzy:: Grzelka, M.
Marciniak, L.
Gapinski, B.
Budzik, G.
Trafarski, A.
Augustyn-Pieniazek, J.
Gaca, M.
Powiązania:: https://bibliotekanauki.pl/articles/384351.pdf
Data publikacji:: 2012
Wydawca:: Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:: computer tomography
optical coordinate measuring technique
reverse engineering
accuracy of workpiece mapping
Opis:: Non-invasive method of the measurement and identification of shape and geometrical characteristics of measured detail based on the computer tomograph is widely applied in medicine with high efficiency. The paper is aimed at presenting the metrological analysis of the accuracy of shape reproduction. The examined shape was described due to the tomography and compared to the results of coordinate measurement. The comparative accuracy analysis of the tomography was performed for the typical details, as well as for the masters made with high accuracy. Using the results of the analysis, the respective models of measured details were created and used as a nominal in the further investigations. The results of the measurement with tomography were compared with the results achieved from the measurement by means of typical coordinate measuring machines and by means of 3D measurement optical scanner. Analysis of the gained values of the form deviations and important geometrical characteristics enabled to perform complex analysis of the shape reproduction of the examined detail with the method of computer tomography. The main purpose of the performed researches was the determination of the reproduction accuracy of surface measured with non-invasive computer tomography method. The investigations and analysis have been performed with the following equipment: computer tomograph, 3D printer and coordinate optical scanner supported with specialized software for advanced CAD data analysis.
Źródło:: Journal of Automation Mobile Robotics and Intelligent Systems; 2012, 6, 3; 23-26
1897-8649
2080-2145
Pojawia się w:: Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: The determination of accuracy of the demonstrator of aeronautic bevel gearbox, accomplished by selected rapid prototyping techniques using an optical scanner Atos II Triple Scan
Autorzy:: Marciniec, A.
Budzik, G.
Dziubek, T.
Sobolewski, B.
Zaborniak, M.
Powiązania:: https://bibliotekanauki.pl/articles/247540.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: bevel gear
aircraft gearbox
optical scanner
coordinate measuring technique
rapid prototyping
gear modelling
Opis:: Designing and manufacturing of aeronautic bevel gearboxes is a complicated and time-consuming process because of complex kinematics of the machining process as well as numbers of manufacturing methods. Machine manufacturers usually provide algorithms used in manufacture process. This requires substantial financial resources and, in consequence, it increases the costs of production. Using other commonly available calculation algorithm requires a lot of studies to verify whether the proposed gearbox works correctly. In order to reduce the manufacturing costs of prototypes, it is possible to use Rapid Prototyping methods. Using both Rapid Prototyping techniques and coordinate optical measurements enables to verify the correctness of assumptions made in the initial stage of product designing. This approach reduces significantly both prototyping time and manufacturing costs. In order to ensure the effectiveness of prototyping process, it is essential to provide the accuracy of manufactured prototypes. That is the reason why it is necessary to determine manufacturing methods that will ensure the highest geometric accuracy. The study presents the modelling and manufacturing process of aeronautic bevel gear of demonstrator taking into consideration the accuracy of selected Rapid Prototyping methods. The gear modelling is based on machining simulation method conducted in Autodesk Inventor. The measurement results are shown in displacement maps obtained with an optical scanner Atos II Triple Scan and universal GOM Inspect Professional software, which determines the prototype accuracy in relation to 3D-CAD models.
Źródło:: Journal of KONES; 2014, 21, 3; 205-209
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Ocena dokładności form silikonowych wykorzystaniem pomiarów optycznych
Evaluation of silicone mould accuracy with use of optical measurements
Autorzy:: Budzik, G.
Grzelka, M.
Markowski, T.
Oleksy, M.
Powiązania:: https://bibliotekanauki.pl/articles/155357.pdf
Data publikacji:: 2010
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: forma silikonowa
technika współrzędnościowa
pomiary optyczne
szybkie prototypowanie
skaner optyczny
silicone mould
coordinate measuring
optical measurements
rapid prototyping
optical scanner
Opis:: Artykuł przedstawia badania dokładności geometrycznej silikonowej formy odlewniczej wykonanej z wykorzystaniem procesu szybkiego prototypowania narzędzi (RT - Rapid Tooling). Badana forma odlewnicza jest przeznaczona do wykonywania prototypów kół zębatych z żywic polimerowych oraz wosków odlewniczych. Celem badań było określenie rzeczywistej dokładności geometrycznej formy silikonowej w stosunku do założeń teoretycznych określonych na podstawie parametrów karty materiałowej zastosowanego silikonu. Forma silikonowa została wykonana na podstawie stereolitograficznego modelu koła zębatego. Do badań wykorzystany został skaner optyczny GOM. Pomiary formy oraz modelu bazowego wykonane zostały w trybie skanującym na podstawie modelu 3D-CAD koła zębatego. Pomiary umożliwiły określenie dokładności wykonania formy w stosunku do nominalnego modelu 3D-CAD. Zagadnienia związane z określaniem dokładności geometrycznej form silikonowych i wykonanych w nich prototypów są poruszane sporadycznie w analizowanej literaturze z zakresu szybkiego prototypownia. Z tego względu badania przedstawione w artykule stanowią oryginalne opracowanie w aspekcie teoretycznym i praktycznym.
The paper presents investigations of the geometrical accuracy of a silicone casting form manufactured with use of the rapid prototyping of tools (RT - Rapid Tooling). The tested casting form is applied to production of prototypes of sprockets from polymer resins as well as casting waxes. The aim of investigations was to determine the real geometrical accuracy of the silicone form in the relation to the theoretical assumptions taken on a basis of the parameters of the used silicone material card. The silicone form was made basing on the sprocket stereolitographic model. An optical scanner GOM was applied to investigations. Measurements of the form and base model were taken in the scanning mode on a basis of the sprocket 3D-CAD model. They enabled determining the precision of the form manufacturing in relation to the nominal 3D-CAD model. Problems deal-and prototypes manufactured in them are seldom considered in the literature from the field of rapid prototyping. That is why the investigations presented in the paper are the original work from theoretical and practical point of view.
Źródło:: Pomiary Automatyka Kontrola; 2010, R. 56, nr 1, 1; 18-19
0032-4140
Pojawia się w:: Pomiary Automatyka Kontrola
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "coordinate measuring" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język