Temat: experimental - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Experimental crash tests involving passenger cars and the prototype concrete protective barrier
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/247037.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: experimental tests
test track
concrete protective barrier
crash test
experimental verification
Opis:: The work describes the experimental test methodology and results obtained during the experimental crash tests involving passenger cars and the prototype concrete protective barrier, which was built according to the original design prepared by the authors of this article. The crash tests involving a vehicle and the protective barrier cover the experiment results in three basic areas: severity ofthe collision impact on vehicle passengers, the impact on a vehicle and deformation of the road protective system. Applied testing procedures meet the requirements of the national standards, that make the equivalents of the European standards EN-1317-1:1998, EN-1317-2:1998, EN-J 317-3:2000. The tests have been performed for selected crash criteria (TB11 and TB32), for a normal restrain level (N2), using three passenger's cars (Dodge Neon and 2 units of Suzuki Swift). Applied testing procedures meet the requirements of the national standards [1-5]. The work presents examples of experimental test results in three basie areas: intensity of the crash impact on the vehicle passengers, the impact on a vehicle and deformation of the road protective system. The test results have been presented in a form of courses of speeds and accelerations along the vehicle body axes x, y, z. Acceleration severity index (ASI), theoretical head impact velocity (THIV), post-impact head delay (PHD), vehicle cabin deformation index (VCDI) and deformation levels of the road protective system (W) have been also defined.
Źródło:: Journal of KONES; 2010, 17, 2; 35-42
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Studies on the supporting structure of the ”crossbow” rocket launcher in the aspect of improvement of its resistance properties
Autorzy:: Rybak, P.
Borkowski, W.
Hryciów, Z.
Michałowski, B.
Wiśniewski, A.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/243483.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: structure
dynamical loads
experimental research
numerical research
Opis:: This paper presents the results of the studies on a special vehicle Polaris Ranger 6×6 800 equipped with the ”Crossbow” antiaircraft rocket launcher, manufactured by TELESYSTEM-MESKO Sp z o. o. Implementation and Manufacture Centre. The supporting structure of the launcher made the main object of the analysis. The essential goal of that undertaking was to obtain a structure of resistance assuring reliable system operation in various conditions of use. In order to reach that goal, the experimental as well as the model tests have been performed on the launcher vehicle. The experimental tests were carried out during multi-variant rides on the paved roads and in the wilderness of significant level of unevenness. Significant information on the level, directions and nature of affecting dynamic loads and the effects of their influence on the vehicle elements. The analysis of obtained results also provided the data required for a development of a model of the object of the studies. A MES model of the object of the studies was prepared in the LS-DYNA system. A high pressure was put on modelling a complex chassis of the launcher and mutual reaction of assemblies and parts. A generalized issue on the own properties was solved – frequencies and associated forms of vibrations of own main assemblies were designated. Resistance calculations were carried out for assumed loads. In principle, loads imposed by normative requirements for a particular class of armament and military equipment were assumed. Loads resulting from potential conditions of use and installation on other carriers were also included. The tests were performed for various load variants. Sensitive elements of the chassis were modified and highly satisfying results were obtained. It gives a reason to think that the chassis is resistant to expected and difficult operation conditions and assures that the whole system will work reliably.
Źródło:: Journal of KONES; 2013, 20, 3; 353-358
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Research on the effectiveness of the innovative protective structure for vehicles
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Starczewski, L.
Gmitrzuk, M.
Szcześniak, K.
Powiązania:: https://bibliotekanauki.pl/articles/243785.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: structure
dynamical loads
experimental research
numerical research
Opis:: This article presents results of the research on developed innovative protective structure for vehicles. The fundamental objective of executed work was to check the correctness of assumed assumptions, shape and geometry of the solution and configuration of components that affect the protective effectiveness during the impact of the explosive. In order to reach that goal, both model tests and experimental tests were carried out. The experimental tests were carried out on the real object. Significant information about the level, directions and nature of affecting dynamic loads were obtained as well as information about their impact on particular structure elements. The MES numerical model of the research object has been developed in LS-Dyna system. Special emphasis was placed on the mapping of complex geometry, configuration of components and their interactions. Test calculations were carried out and then the resistance calculations were made. As a load, generating post-explosion impact wave, the load imposed by normative requirements concerning the way of explosive arrangement as well as the shape and weight. The analysis of obtained results of the experimental and numerical tests allows for high evaluation of effectiveness of proposed solution.
Źródło:: Journal of KONES; 2015, 22, 1; 29-36
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Operational loads of combat vehicles
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Wysocki, J.
Papliński, K.
Michałowski, B.
Powiązania:: https://bibliotekanauki.pl/articles/244652.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combat vehicles
maintenance
modeling and experimental research
Opis:: The paper describes dynamic load-generating sources and their effects on combat vehicles (CV), placed people and equipment within it. The variety of the operation conditions causes a complex dynamic load, both in terms of level, direction and distribution. The effects of the impacts are shown in photographs. It is important to know the level of loads in terms of the development of resistant and safe high-speed tracked combat vehicles. The selected results of its own researches of high-speed tracked combat vehicles were presented. Research were carried out under conditions similar to those typical for this class of vehicles, both during the rides on the road, the ground and obstacles on the specially constructed for this purpose. The results of research and analysis are compared in the form of graphs and the estimated value. The paper presents angular movement of the hull of the CV as well as displacements of carrying wheels during overcoming a single obstacle, elastic characteristics of hydro-pneumatic suspension components, distribution of pressure acting on a selected area of the bottom of the hull after mine explosion and power spectral density estimator of tank gun vibration as well as being the source longitudinal vibration of the hull tank. The presented scope and methodology allows the multi-variants investigation and estimate the loads of the hall, interior fittings and people in special vehicles and other objects that may be exposed to this type of loads.
Źródło:: Journal of KONES; 2011, 18, 1; 77-84
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The research on dynamic loads and traction properties of military vehicles in the aspect of improvement of their structures
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Wysocki, J.
Michałowski, B.
Wiśniewski, A.
Powiązania:: https://bibliotekanauki.pl/articles/247931.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: military vehicle
dynamic loads
traction
model tests
experimental tests
Opis:: Since the beginning of the 90’s, a scientific team in the Motor Vehicle and Transport Institute of the Mechanical Department in the Military University of Technology, has been involved in the model and experimental tests of the existing structures of the military vehicles (tanks, combat infantry vehicles and wheeled armoured carriers) in the aspect of their modernization. A part of works is related to the military vehicles included in the army’s equipment and the other parts are related to newly designed vehicles. In both cases issues related to the behaviour of selected assemblies and the whole vehicle, structure during threats posed by the reality of contemporary battlefield or armed symmetric or asymmetric conflicts are analysed. Selected effects of the tests and analyses will be presented mostly within the qualitative scope due to the data sensitivity. Contemporary design of military vehicles requires involvement of various research methods and specialized calculation software. The results obtained during performed various experimental tests make a valuable basis for verification of numerical models used in design process and multi-option simulation calculations.
Źródło:: Journal of KONES; 2015, 22, 1; 37-46
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Experimental research on the dynamic loads of the wheeled armoured personnel carrier
Autorzy:: Borkowski, W.
Hryciów, Z.
Michałowski, B.
Rybak, P.
Wiśniewski, A.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/243711.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: experimental research
dynamic loads
wheeled armoured personnel carrier
acceleration
vibrations
Opis:: The results of the experimental research on the influence of the special vehicle movement conditions on the body shell and the vehicle crew dynamic load will be presented in the paper. ROSOMAK Wheeled Armoured Personnel Carrier (Wheeled APC), the basic version, was the subject of the research. The research work was aimed at analysis of the dynamic loads resulting from the deterministic inputs and driving on the selected types of surfaces generating random kinematic inputs. The personnel carrier service conditions, measuring apparatus, and testing methods will be described. The vertical accelerations of the selected points of the vehicle, and deflection of the prime and second suspension of the vehicle left side were measured. The time and the acceleration RMS value spectrum charts for the selected implementations will be presented. The cumulative statistics will be shown in the form of a table. The conclusions regarding the influence of the road surface on the personnel carrier driver's working comfort will be formulated. The assessment of the suspension quality will be included in the conclusions. Driving on the smooth surface is comfortable. However, the road surface worsening causes decreased proficiency sense until the exposure limit boundary is reached when the vehicle drives on a poor quality cobble road with 50 km/h speed. The vehicle basic version is not fitted with the seats for assault troops, therefore the influence of the road irregularities on the centre of mass of the body shell, and the driver's and commander's seats were determined. It is recommended to make further tests on the personnel carrier combat and special versions.
Źródło:: Journal of KONES; 2011, 18, 1; 69-76
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Experimental investigations of laboratory cylinder loaded by explosion
Badania eksperymentalne cylindra laboratoryjnego obciążonego wybuchem
Autorzy:: Rybak, P.
Borkowski, W.
Michałowski, B.
Powiązania:: https://bibliotekanauki.pl/articles/241973.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: badania eksperymentalne
ładunek wybuchowy
cylinder laboratoryjny
experimental investigations
explosive
laboratory cylinder
Opis:: In the paper were described results of experimental investigations of original steel construction elements of laboratory stand exposed to impact of explosion. As experimental stand were used laboratory cylinder which has circular symmetrical bottom spread on no deformable rim. Cylinder was installed on supports fixed to strengthen foundation and exposed to impact, caused by explosion of explosives with given mass and shape lying on foundation in the centre of bottom plate. As effect of investigations were registered and presented graphically as pressure versus time charts in various points on bottom plate, deformation as well as accelerations charts for various distances between foundation and bottom. Obtained results are the base for verification and modification of worked out mathematical models both laboratory cylinder and propagation of after blast wave propagated in limited space. Presented methodology of explorations can be used for analysis of impact resistance of mechanical vehicles or stationary objects with defensive destination.
W pracy opisano rezultaty badań eksperymentalnych oddziaływania wybuchu ładunku na stalowe elementy oryginalnej konstrukcji stanowiska badawczego. Stanowisko badawcze to cylinder laboratoryjny, którego dno jest płytą kołowosymetryczną rozpiętą na nieodkształcalnej obręczy. Cylinder osadzono na podporach utwierdzonych w fundamencie o wzmocnionej strukturze i poddano obciążeniu wybuchem ładunku materiału wybuchowego o zadanej masie i kształcie, leżącego na fundamencie na wysokości środka płyty dennej. W efekcie badań zarejestrowano i przedstawiono na rysunkach przebiegi czasowe ciśnienia w określonych punktach dna cylindra, przebiegi odkształceń oraz jego przyspieszeń dla różnych wartości odległości podłoża od dna. Uzyskane rezultaty stanowią podstawę do weryfikacji i modyfikacji opracowanych modeli matematycznych zarówno cylindra laboratoryjnego jak też modelu matematycznego propagacji powybuchowych fal uderzeniowych w ograniczonej przestrzeni. Przedstawiona metodyka badań eksperymentalnych może być wykorzystana do analizy odporności udarowej pojazdów mechanicznych lub obiektów stacjonarnych o przeznaczeniu obronnym.
Źródło:: Journal of KONES; 2007, 14, 1; 321-330
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "experimental" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język