Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "elastomers" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Experimental evaluation of energy absorbing properties of selected elastomer materials
Autorzy:
Stankiewicz, M.
Popławski, A.
Bogusz, P.
Gieleta, R.
Sławiński, G.
Powiązania:
https://bibliotekanauki.pl/articles/247562.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
material research
experiment
elastomers
polyurethanes
energy absorption properties
Opis:
The paper presents identifying studies of mechanical properties of the selected materials from the group of elastomers including Asmathane (65 ShA), Easyprene FPS (30 ShA), Biresin (U1305). The tests were carried out at the Laboratory of Strength of Materials, the Department of Mechanics and Applied Computer Science, with the use of an especially designed stand for testing the energy absorption of materials. The research aims were to determine the basic properties and characteristics of the selected materials as well as to compare them and identify the material with the best energy-absorbing characteristics. For a single load-unload cycle, applied dynamically, the hysteresis loops were recorded. Energy-absorption of individual materials and maximum strength were determined. During the experimental test, a fast speed camera was used for accurately register the progress performance of the test. The pictures of the dynamic tests of materials behaviour are shown. The curves of the tested materials are compared in the graphs. The resulting data will help to create constitutive models of the tested materials, which in the next stages of the project will be used in numerical studies on the impact of detonation on the designed protective panel.
Źródło:
Journal of KONES; 2015, 22, 3; 241-248
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Static axial crush performance of unfilled and elastomer-filled composite tubes
Autorzy:
Ochelski, S.
Bogusz, P.
Kiczko, A.
Powiązania:
https://bibliotekanauki.pl/articles/200998.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanical properties
absorbed energy
polymer composites
elastomers
experimental mechanics
Opis:
The paper presents the results of the experimental static axial crush performance of unfilled and filled composite tubes. Composites are widely used as materials for energy absorbing structures because of their low density and a very high absorbed energy in relation to the mass ratio. Foamed materials are used in order to additionally increase their efficiency, because of stabilizing the progressive crush. It was proved by many authors that various foamed materials positively influence the energy absorption. In this work authors took effort to evaluate a very different material as a filler of common composite elements . elastomers. Elastomers are materials characterised by very high crush strains and viscoelastic properties. The tube shaped specimens made of epoxy composite, reinforced with carbon or glass fabrics were filled with elastomers of 40; 60; 70 and 90. ShA hardnesses. The influence of the elastomer hardness and the filling degree on the energy absorption factor (EA) was evaluated. The degree of filling the specimens with elastomers is determined by a different size of the elastomer perforation. Elastomers have a negative impact on the energy absorbed by the composite tubes.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2012, 60, 1; 37-43
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of hardness on mechanical properties of elastomers
Autorzy:
Ochelski, S.
Bogusz, P.
Kiczko, A.
Powiązania:
https://bibliotekanauki.pl/articles/246003.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
experimental research
elastomers
mechanical properties
relative damping coefficient
mechanical loss angle
Opis:
In this paper, elastomers with different hardness factors were examined to evaluate the influence of the hardness on their mechanical properties. The following hardness numbers, measured in Shore A hardness scale, were investigated: 40; 60; 70 and 90°. Basic mechanical tests i.e. axial tension and axial compression have been performed in order to calculate elastic properties and stress values corresponding to the fixed strains: epsilon = 0.2; 0.3 and 0.5. The sigma (epsilon) dependences from the tension and compression tests are nonlinear and have different shapes. The tension plot can be described by a convex parabola, while the compression curve can be approximated by a concave one. dynamic load tests with loading freąuencies 0.01; 0.1; 1.0 and 3,OHz were performed in order to determine the hysteresis loop and to obtain force and displacement dependences in time. From those results the following factors were calculated: relative damping coefficient and mechanical loss angle, as well as their dependence on load frequencies. The influence of hardness on both in-phase and out-of-phase components of normal modulus were investigated. The sensitivity of the examined elastomers to the loading rate was also investigated.
Źródło:
Journal of KONES; 2010, 17, 1; 317-325
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies