Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Bialy, K" wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
MFC/IMC system for processes with varying time-delay exemplified by a 4 MW steam boiler
Układ MFC/IMC w regulacji procesami o zmiennym opóźnieniu na przykładzie kotła parowego mocy 4 MW
Autorzy:
Skoczowski, S.
Biały, P.
Pietrusewicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/158136.pdf
Data publikacji:
2004
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
robust PID control
fuzzy logic
model following control (MFC)
regulacja typu model-following
Opis:
The paper deals with robust model-following control of a process with varying time-delay. The proposed MFC/IMC structure offers more robustness to plant parameter perturbations and less sensitivity to disturbances, as compared with classic single-feedback loop with PID controller. On the basis of presented results of oxide content control in a 4 MW steam boiler one can compare properties of the proposed structure with properties of the classic single-loop system with PID controller. Also, the use of PD/PI fuzzy-logic controller as a part of MFC/IMC system confirms is flexibility.
Artykuł prezentuje wyniki badań nad oporną strukturą regulacji MFC/IMC dla obiektów ze zmiennym opóźnieniem. proponowana struktura chrakteryzuje się małą wrażliwością na perturbacje nominalnego modelu sterowanego obiektu, oraz znacznym tłumieniem zakłóceń wejściowych oraz tych sprowadzonych do wyjścia obiektu. Wyniki badań symulacyjnych dla obiektów aperiodycznych z opóźnieniem z użyciem struktury MFC/IMC sprawdzone zostały na przykładzie procesu doregulowywania zawartości tlenu w kotłach parowych mocy 4 MW, i porównane z klasyczną strukturą jednopętlową z regulatorem PID.
Źródło:
Pomiary Automatyka Kontrola; 2004, R. 50, nr 12, 12; 39-42
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Microwave Heating on the Molding Mass with Gypsum Binder Structure and Strength
Autorzy:
Paduchowicz, P. J.
Granat, K.
Biały, P.
Powiązania:
https://bibliotekanauki.pl/articles/1837825.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry
foundry materials
foundry technologies
plaster gypsum
moulding and core sands
strength of masses
odlewnia
materiały odlewnicze
technologie odlewnicze
gips
masy formierskie
wytrzymałość mas formierskich
Opis:
The paper presents results of influence microwave drying on strength and technological properties of molding sand with gypsum binder researches, which, immediately after making and after the natural initial setting in air for 1, 2 or 5 hours, was heated with 250 W microwave power for 3, 6, 9 and 12 min time periods. The test was carried out on a mass containing (% -wt.): 88% Grudzeń-Las quartz sand, 12% "Dolina Nidy" plaster gypsum and 6% water. The loss of moisture content during natural drying and then microwave drying was determined, significant from the point of view of using the mass with gypsum binder in the production of products, using an environmentally friendly technology without casting incompatibilities. Additionally, the compressive strength of the mass was measured. The influence of both drying methods on the binder crystallization process and the associated mass strength was demonstrated, especially in terms of the possibility of selecting parameters and / or intensifying a specific drying method for use in the technology of manufacturing molds and foundry cores.
Źródło:
Archives of Foundry Engineering; 2021, 21, 1; 113-118
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Hardening Methods on the Moulding Sand’s Properties with Gypsum Binder
Autorzy:
Granat, K.
Paduchowicz, P.
Dziedzic, A.
Jamka, M.
Biały, P.
Powiązania:
https://bibliotekanauki.pl/articles/1840922.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry
gypsum binder
foundry masses
core mass
masses properties
odlewnia
spoiwo gipsowe
masy odlewnicze
masa rdzeniowa
właściwości masy
Opis:
The research paper presents the results of testing the strength and technological properties of molding sand with gypsum binder, the bonding process proceeded: naturally or conventionally. The tests included mass containing (parts by weight): 78 pbw. Grudzeń-Las quartz sand, 22 pbw. plaster gypsum "Dolina Nidy” and 9 pbw. water. Measurements of compressive strength, shear, tensile and bending as well as permeability and looseness were carried out on standard cylindrical samples kept in the air for 1-96 hours or dried at 110oC for 1-8 hours. The results of the analysis were analyzed in connection with the mass structure and construction binding bridges warp grains observed with a scanning microscope (SEM). The influence of drying intensity on the bonding process and related mass properties has been demonstrated, especially from the point of view of the possibility of selection and / or intensification of a specific curing method for use in the production of gypsum binger molds and cores.
Źródło:
Archives of Foundry Engineering; 2020, 20, 4; 13-17
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies