Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Çelik, Mehmet Sabri" wg kryterium: Autor


Wyświetlanie 1-2 z 2
Tytuł:
Bubbling properties of frothers and collectors mix system
Autorzy:
Batjargal, Khandjamts
Guven, Onur
Ozdemir, Orhan
Karakashev, Stoyan I.
Grozev, Nikolay A.
Boylu, Feridun
Çelik, Mehmet Sabri
Powiązania:
https://bibliotekanauki.pl/articles/2146880.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
critical coalescence concentration (CCC)
Sauter diameter (d32)
bubble size distribution (BSD)
Opis:
This paper studies the effect of the type and concentration of selected frothers and collectors mix system on the bubble sizes (Sauter mean diameter, SMD) of bubbling flow produced in a micro flotation cell and the determination of bubble size distribution (BSD). The usage of dodecyl amine hydrochloride (DAH) collector on the critical coalescence concentration of commercial frothers PPG200, PPG400, and PPG600 was investigated in detail. The results of these studies showed that the usage of DAH decreased the CCC of these frothers. Each frother + collector mixing system exhibited its unique ability in preventing coalescence of the bubbles in the order of PPG200 < PPG400 < PPG600. The factorial experiments established that the type of the frother, collector, and their concentration had a major effect on the size of the bubbles. The BSD in the presence of PPG600 + DAH mix system resulted in a little bit wider BSD which indicated the effect of frother type in mixed systems.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 5; art. no. 152890
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Physical restrictions of the flotation of fine particles and ways to overcome them
Autorzy:
Karakashev, Stoyan I.
Grozev, Nikolay A
Ozdemir, Orhan
Guven, Onur
Ata, Seher
Bournival, Ghislain
Batjargal, Khandjamts
Boylu, Feridun
Hristova, Svetlana
Çelik, Mehmet Sabri
Powiązania:
https://bibliotekanauki.pl/articles/2146879.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fine particle flotation
frequency of collisions
surface force manipulation
thin wetting films
Opis:
This work analyses the basic problems of the fine particles flotation and suggests new ways to overcome them. It is well accepted that the poor recovery of fine particles is due to the small collision rate between them and the bubbles due to the significant difference between their sizes. This common opinion is based on a theory, assuming in its first version a laminar regime, but later has been advanced to intermediate turbulence. It accepts that the particles are driven by the streamlines near the bubbles. In reality, the high turbulence in the flotation cells causes myriads of eddies with different sizes and speeds of the rotation driving both bubbles and particles. Yet, a theory accounting for high turbulence exists and states that the collision rate could be much higher. Therefore, we assumed that the problem consists of the low attachment efficiency of the fine particles. Basically, two problems could exist (i) to form a three-phase contact line (TPCL) the fine particle should achieve a certain minimal penetration into the bubble, requiring sufficient push force; (ii) a thin wetting film between the bubble and the particle forms, thus increasing the hydrodynamic resistance between them and making the induction time larger than the collision time. We assumed particles with contact angle θ = 80°, and established a lower size flotation limit of the particles depending mostly on the size of the bubbles, with which they collide. It spans in the range of Rp = 0.16 um to Rp = 0.40 um corresponding to bubbles size range of Rb = 50 um to Rb = 1000 um. Hence, thermodynamically the particle size fraction in the range of Rp = 0.2 um to Rp = 2 um are permitted to float but with small flotation rate due to the small difference between the total push force and maximal resistance force for formation of TPCL. The larger particles approach slowly the bubbles, thus exceeding the collision time. Therefore, most possibly the cavitation of the dissolved gas is the reason for their attachment to the bubbles. To help fine particles float better, the electrostatic attraction between bubbles and particles occurred and achieved about 92% recovery of fine silica particles for about 100 sec. The procedure increased moderately their hydrophobicity from θ ≈ 27.4° to θ ≈ 54.5°. Electrostatic attraction between bubbles and particles with practically no increase of the hydrophobicity of the silica particles ended in 47% recovery. All this is an indication of the high collision rate of the fine particles with the bubbles. Consequently, both, an increase in the hydrophobicity and the electrostatic attraction between particles and bubbles are key for good fine particle flotation. In addition, it was shown experimentally that the capillary pressure during collision affected significantly the attachment efficiency of the particles to the bubbles.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 5; art. no. 153944
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-2 z 2

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies