Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "copper electrorefining" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Models for viscosity and density of copper electrorefining electrolytes
Autorzy:
Kalliomaki, T.
Aji, A. T.
Rintala, L.
Aromaa, J.
Lundstrom, M.
Powiązania:
https://bibliotekanauki.pl/articles/109549.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
copper electrorefining
viscosity model
density model
Opis:
Viscosity and density of copper electrorefining electrolytes affect energy consumption and purity of cathode copper. Decreasing the viscosity and density increases the rate of falling of the anode slimes to the bottom of an electrorefining cell and increases the diffusivity and mobility of ions. Increasing the falling rate of the anode slimes decreases a risk of anode slime impurities ending up on the cathode and being entrapped into the copper deposit. This work introduces two new models for both viscosity and density of copper electrorefining electrolytes with high accuracy and one reconstructed improved model for some electrorefining data of viscosity published previously. The experimental work to build up these new models was carried out as a function of temperature (50, 60, 70 °C), copper (40, 50, 60 g/dm3), nickel (0, 10, 20 g/dm3) and sulfuric acid (130, 145, 160 g/dm3) concentrations for all models, and additionally arsenic concentration (0, 15, 30, 32, 64 g/dm3) was included in the viscosity models. Increasing concentrations of Cu, Ni, As and H2SO4 were found to increase the viscosity and density, whereas increasing temperature decreased both viscosity and density. The viscosity models were validated with industrial electrolyte samples from the Boliden Harjavalta Pori tankhouse. The experimental and modeling work carried out in this study resulted in improved viscosity models, having the strongest agreement with the industrial electrorefining electrolytes.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 1023-1037
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Copper deposition on stainless steel sheets in copper nitrate solution
Autorzy:
Kekki, A.
Aromaa, J.
Forsen, O.
Powiązania:
https://bibliotekanauki.pl/articles/110678.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
copper nitrate
electrorefining
high purity copper
hydrometallurgy
Opis:
The aim of this study was to examine factors that influence copper nitrate based electrorefining of copper and to search the best process parameters for high-purity copper deposition on AISI 316L steel blanks. Considering impurities, the most important goal was to minimize sulfur content in a copper cathode. The effect of Cu2+ concentration, current density, temperature and pH were studied. The best parameters for the best copper purity were sorted out. The most important factors for quality copper deposition are sufficiently low Cu2+ concentration, low current density, right zone and careful control of pH. Active nitrate ion reduction reactions catalyzed by copper ions are suggested to affect detrimentally both copper deposition current efficiency and purity. Furthermore, nitrate ion reactions seem to elevate an electrolyte pH so that the deposition appears to be dark brow copper oxide. The 6N purity for copper was not reached with this cell construction and it felled behind about 7 ppm (99.9993% Cu). Both, sulfur and silver concentration were slightly above 1 - 2 ppm. To minimize the impurities, electrolyte circulation and filtration are needed. Also, either a separate silver cementation cell or cementation membrane is needed.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 247-256
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of characterization methods for adherent anode slimes in copper electrorefining
Autorzy:
Kiviluoma, M.
Aaltonen, M.
Aromaa, J.
Lundstrom, M.
Forsen, O.
Powiązania:
https://bibliotekanauki.pl/articles/110440.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
anode
slime
copper
electrorefining
nickel
lead
arsenic
Opis:
Adherent anode slimes can cause anode passivation in copper electrorefining and lower the efficiency of copper electrorefining. Declining concentrate grades cause larger impurity levels in anodes, thus creating larger quantities of slimes in the refining process. In order to investigate the characterization methods for adherent anode slimes in copper electrorefining, experiments were conducted for the Boliden Harjavalta Pori refinery material. Methods such as particle size determination, chemical (ICP) analysis, settling rate determination, XRD, SEM-SE, SEM-BSE and SEM-EDS were applied. In addition, adherent anode slime samples were compared to optical micrograph and SEM-BSE images of respective anode copper samples. It was shown that SEM-EDS and SEM-BSE provided precise information about phases formed during electrorefining. The settling rate and particle size had a correlation only with a copper content of anode slime. The main phases in the anode slime were copper and lead sulphates as well as copper-silver selenides. NiO was shown to be the major Ni-bearing phase in the adherent slime. Nickel, tellurium and lead had the strongest, whereas arsenic, selenium and antimony had the weakest tendency to report to the anode slime.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 295-302
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies