Autor: Bayca, S. U. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Optimization of pure borax pentahydrate extraction from calcined tincal
Autorzy:: Abali, Y.
Bayca, S. U.
Edgunlu, G.
Powiązania:: https://bibliotekanauki.pl/articles/109778.pdf
Data publikacji:: 2015
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: optimization
calcined tincal
borax
dissolution
leaching
Taguchi method
Opis:: In this study, conditions for the calcination process of tincal were investigated and the optimum calcination conditions for boron extraction from tincal were determined. The experimental parameters were dissolution temperature, solid-to-liquid ratio, dissolution time and stirring speed. The optimum dissolution parameter levels were determined to be temperature 80 °C, solid-to-liquid ratio 10 g/dm3, stirring speed 250 rpm and dissolution time 5 min.
Źródło:: Physicochemical Problems of Mineral Processing; 2015, 51, 2; 375-385
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Removal of methylene blue by natural and Ca and K-exchanged zeolite treated with hydrogen peroxide
Autorzy:: Canli, M.
Abali, Y.
Bayca, S. U.
Powiązania:: https://bibliotekanauki.pl/articles/109770.pdf
Data publikacji:: 2013
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: dye adsorption
methylene blue
adsorption
isotherms
zeolite
aluminosilicate
hydrogen peroxide
Opis:: A comparison was made of influence of physically adsorbed methylene blue (MB) dye on the physicochemical properties of Manisa-Akdere zeolite (natural zeolite) and zeolite modified with K and Ca (all samples treated with hydrogen peroxide before modification) using batch adsorption technique. After elementary characterization of this adsorbent, the effects were investigated of initial MB concentration, pH, contact time, stirring rate, adsorbent dosage and temperature on the selectivity and sensitivity of the removal process. A larger adsorption of the dye was observed for modified zeolite (42.7 mg/g) than for natural zeolite (28.6 mg/g) per gram of an adsorbent after all zeolite samples treated with hydrogen peroxide. Zeolite treated with H2O2 showed higher adsorption capacity than untreated zeolite samples. The Langmuir model (R2 values between 0.959 and 0.996) fitted the experimental data better than the Freundlich model (R2 values between 0.804 and 0.988). The adsorption process was found to be slightly influenced by adsorbent dosage, contact time and temperature. Optimum pH for adsorption of MB was found to be at 7. Adsorption equilibrium attained within 30 minutes. The sorption of MB increased slightly with rising temperature. In addition, adsorption values rose with modification Ca-Exchanged (after H2O2 treatment) > K-Exchanged (after H2O2 treatment) > Zeolite treated with H2O2 > Ca-Exchanged >K-Exchanged >Natural Zeolite.
Źródło:: Physicochemical Problems of Mineral Processing; 2013, 49, 2; 481-496
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Dissolution kinetics of smithsonite in boric acid solutions
Autorzy:: Abali, Y.
Bayca, S. U.
Gumus, R.
Powiązania:: https://bibliotekanauki.pl/articles/109836.pdf
Data publikacji:: 2017
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: dissolution
leaching
kinetics
reaction engineering
smithsonite
zinc borate
Opis:: The dissolution of smithsonite in boric acid solutions was investigated. The influence of the reaction temperature, acid concentration, solid-to-liquid ratio, particle size and stirring speed on the zinc extraction were determined in the experiments. The results show that the dissolution rate increases with increasing acid concentration and reaction temperature, and with decreasing particle size and solid-to-liquid ratio. The dissolution results were analyzed by reaction control models. The activation energy of smithsonite in boric acid solution was also calculated.
Źródło:: Physicochemical Problems of Mineral Processing; 2017, 53, 1; 161-172
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Bayca, S. U." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język