Autor: Rogalski, J. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Cold cracking of S460N steel welded in water environment
Autorzy:: Tomków, J.
Łabanowski, J.
Fydrych, D.
Rogalski, G.
Powiązania:: https://bibliotekanauki.pl/articles/258574.pdf
Data publikacji:: 2018
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: underwater welding
wet welding
high-strength low-alloy steel
cold cracking
CTS test
Opis:: This paper shows results of weldability testing of fine-grained high -strength low- alloy S460N steel welded in water environment by covered electrodes. The tests were carried out by using the CTS test specimens with fillet welds. Four specimens were welded under water and one specimen in air. Welded joints were subjected to non-destructive visual and penetration tests. The accepted joints were then subjected to macroscopic and microscopic inspection and Vickers hardness measurements as well. The experiments showed that S460N steel welded in water environment is characterized by a high susceptibility to cold cracking.
Źródło:: Polish Maritime Research; 2018, 3; 131-136
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 2.

Tytuł:: Bead-on-plate welding on S235JR steel by underwater local dry chamber process
Autorzy:: Rogalski, G.
Łabanowski, J.
Fydrych, D.
Tomków, J.
Powiązania:: https://bibliotekanauki.pl/articles/260232.pdf
Data publikacji:: 2014
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: maximum hardness of the heat affected zone
welding under water
dry chamber process
Opis:: The article presents the results of the effect of parameters of underwater local dry chamber welding on the properties of padding welds. The effect of heat input and the type of shielding gas on the structure and hardness of welds was established. the functions for estimating the maximum hardness of the heat affected zone have been also elaborated.
Źródło:: Polish Maritime Research; 2014, 2; 58-64
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 3.

Tytuł:: Weldability of high strength steels in wet welding conditions
Autorzy:: Fydrych, D.
Łabanowski, J.
Rogalski, G.
Powiązania:: https://bibliotekanauki.pl/articles/258484.pdf
Data publikacji:: 2013
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: underwater welding
steel weldability
cold cracking
wet welding
cracks in welds
improving weldability
Opis:: In this paper are characterized problems of high strength steel weldability in underwater wet welding conditions. Water as a welding environment intensifies action of unfavourable factors which influence susceptibility to cold cracking of welded steel joints. The susceptibility to cold cracking of S355J2G3 steel and S500M steel in wet conditions was experimentally estimated (by using Tekken test). It was concluded that the steels in question are characterized by a high susceptibility to formation of cracks in welds. Usefulness of the proposed Temper Bead Welding technique (TBW) was experimentally verified as a method for improving weldability of the steels in the analyzed conditions.
Źródło:: Polish Maritime Research; 2013, 2; 67-73
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 4.

Tytuł:: Underwater wet repair welding of API 5L X65M pipeline steel
Autorzy:: Rogalski, G.
Fydrych, D.
Łabanowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/258860.pdf
Data publikacji:: 2017
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: underwater welding
wet welding
underwater pipeline
API 5L X65M steel
Opis:: This paper presents results of the research of effect of polymer insulation of pipeline made of API 5L X65M steel as well as underwater wet welding parameters on properties of joints made by covered electrodes. Effect of heat input on structure and hardness of joints during repair of underwater pipeline was analyzed. Welding defects like microcracks, micro-lacks of fusion, slag inclusions, as well as HAZ hardness increase over an assumed acceptance criterion for welded joints in pipes without anticorrosion polymer insulation, were identified. A significant effect of polimer insulation on structure and properties of welded joints, was found.
Źródło:: Polish Maritime Research; 2017, S 1; Bibliogr. 27 poz., rys., tab.
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Informacja