Temat: friction stir welding (FSW) - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Stress corrosion cracking of welded joints of Al-Mg alloys
Autorzy:: Czechowski, M.
Powiązania:: https://bibliotekanauki.pl/articles/241941.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: stress corrosion cracking
welding
aluminium alloy
friction stir welding (FSW)
Opis:: Slow strain rate testing (SSRT) was used to test the stress corrosion cracking (SCC) of aluminium alloys AW 5083 and AW 5059 (Alustar) jointed by friction stir welding (FSW). The test was carried out in the air and 3.5% water solution NaCl. Cylindrical notch-free specimens and cylindrical notched specimens (R = 5 mm) were used. The following parameters were measured: time-to-failure – T [h], obtained max. load – F [N]; strain energy (the diagram surface under the stress-elongation curve) – E [MAJ/m3]; relative elongation of the specimen – A11.3 [%]; max. tensile stress – R [MPa] and narrowing – Z [%]. On the basis of obtained results, it was noted that FSW-welded joints show superior strength and resistance to stress corrosion, compared to MIG-welded joints. The fractions after SSRT testing were cleaved with some ductile areas. This article also gives the mechanical features of friction stir welded Al-Mg alloys. Tests have shown that the 5059 alloy, welded by FSW, has superior strength properties compared to the FSW 5083 alloy, along with comparable, good resistance to stress corrosion. FSW 5083 alloy joints have very good resistance to stress corrosion - better than those made using traditional welding methods (MUG). Original value are received results of the stress corrosion resistance of new method friction stir welded Al-Mg alloy compared with traditional MIG method.
Źródło:: Journal of KONES; 2014, 21, 3; 41-45
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Mechanical properties of 5083, 5059 and 7020 aluminium alloys and their joints welded by FSW
Autorzy:: Dudzik, K.
Charchalis, A.
Powiązania:: https://bibliotekanauki.pl/articles/246888.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: friction stir welding (FSW)
aluminium alloys
joints
welding
mechanical properties
shipbuilding
Opis:: The article presents the research results on the mechanical properties of aluminum alloy 7020 and its friction stir welded (FSW) joints. For comparison alloy 5083 – the most currently used in shipbuilding alloy was chosen as well as 5059 - the new high-strength alloy. Besides the native material alloys there were investigated their joints welded by FSW - the same method as alloy 7020. Welding parameters used for the connection of the sheets made of 7020, 5083 and 5059 alloys were presented. Metallographic analysis showed the correct construction of structural bonded joints. Friction Stir Welding (FSW) – a new technology can be successfully used for butt welding of different types of aluminum alloy sheets. FSW method can be an alternative to traditional arc welding methods i.e. MIG or TIG. The research was carried out using a static tensile test in accordance with the requirements of the Polish Standards PNEN ISO 4136:2011 and PN-EN ISO 6892-1:2010. Flat samples cut perpendicular to the direction of rolling were used. The research was conducted at the temperature of + 20ºC. The 7020 alloy has higher strength properties then alloys: 5083 and 5059. The yield stress is higher by 14.8% compared to 5083 alloy, and by 11.7% compared to the alloy 5059. Plastic properties of an alloy 7020 are the lowest, but with reserves meet the requirements of classification societies. The joints welded by FSW of 7020 alloy have higher strength properties then joints of alloys: 5083 and 5059. The yield stress achieves the highest value for alloy 7020 and is 24.2% higher than for 5083 alloy and 11.5% for the 5059 alloy. Despite the strength properties also plastic properties are best for 7020 alloy joints.
Źródło:: Journal of KONES; 2013, 20, 2; 69-73
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Fractography analysis of AW-7020 alloy joints welded by FSW
Autorzy:: Dudzik, K.
Charchalis, A.
Powiązania:: https://bibliotekanauki.pl/articles/244221.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: friction stir welding (FSW)
aluminum alloys
welding
fractography
scanning electron microscopy
Opis:: Technology development of Friction Stir Welding (FSW) method for joining AW-7020 aluminum alloy elements was described. Two kinds of tools were used during research: with a regular pin and with a „TRI-FLUTE” pin. Tools were with different dimensions and the following parameters changed mandrel’s rotary speed Vn [rev/min], welding speed Vz [mm/min], angle of tool deflection αz [o]. The thickness of the joining sheets was g = 12 mm. The sheets were one side milled to a thickness of 10 mm in the contact portion. Samples were tested by Charpy impact strength according to PN-EN ISO 148-1:2010. After these tests, the samples were analysed by means of fractographic examination. The tests were made with using a scanning electron microscope (SEM) Philips XL-30. The analysis has shown that there is the influence of the joining parameters and chosen tools for the possibility of occurrence welding defects in joints. Welding defects detected in the structure of joints after impact studies were: incomplete fusion, separations dissection, and cracks. During the development of friction stir welding technology, the best results, in terms of structure homogeneity and the absence of welding defects, were achieved for the tool with TRI-FLUTE pin and joining parameters: Vn = 450 rev/min, Vz = 180 mm/min, αz = 88.5 °.
Źródło:: Journal of KONES; 2014, 21, 1; 67-74
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Influence of joining method for mechanical properties of 7020 aluminium alloy joints
Autorzy:: Dudzik, K.
Powiązania:: https://bibliotekanauki.pl/articles/245189.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: friction stir welding (FSW)
aluminium alloys
joints
welding
mechanical properties
shipbuilding
Opis:: The article presents the research results on the mechanical properties of aluminum alloy 7020 and its FSW and MIG welded joints. Welding parameters used for the connection of the sheets made of 7020 alloy were presented. Metallographic analysis showed the correct construction of structural bonded joints. Friction Stir Welding (FSW) – a new technology can be successfully used for butt welding of different types of aluminum alloy sheets. FSW method can be an alternative to traditional arc welding methods, especially MIG, which is the most common method of joining aluminum alloys used in shipbuilding. The research was carried out using a static tensile test in accordance with the requirements of the Polish Standards PN-EN ISO 4136:2011 and PN-EN ISO 6892-1:2010. Flat samples cut perpendicular to the direction of rolling were used. The research was conducted at the temperature of + 20ºC. Friction stir welded joints of 7020 alloy have higher strength properties compared to MIG welded joints. The yield stress of FSW joint is higher by 14.2% compared to MIG welded joint, and at the same level as the native material. Plastic properties of FSW joint are much higher than MIG joint (over 40%). Confirmation of high strength properties of FSW joint is the place of crack - beyond the weld in the native material.
Źródło:: Journal of KONES; 2013, 20, 1; 71-76
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Corrosive properties distribution in AW-7020 alloy joints welded by FSW
Autorzy:: Dudzik, K.
Powiązania:: https://bibliotekanauki.pl/articles/247352.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: electrochemical impedance spectroscopy
EIS
friction stir welding
FSW
welding
corrosion
Opis:: The results of corrosion properties research of aluminum alloy AW 7020 (AlZn5Mg1) welded by Friction Stir Welding were presented. In the article the parameters for friction stir welding of sheets made of AlZn5Mg1 (7020) alloy were presented. Corrosion tests were performed on the surface of the FSW joined sheets depending on the distance from the centre of the weld. EIS measurement was performed in three-electrode system in an artificial seawater (3.5% NaCl). Impedance studies were carried out at the corrosion potential. Changed voltage signal amplitude in the range ± 10 mV and frequency range of changes was as follows: 100 kHz - 0.1 Hz. Atlas 0531 EU & IA potentiostat was used for studies. Model in the form of an electrical equivalent circuit replacement was chosen for the test object. The results of electrochemical impedance spectroscopy are presented graphically in the Nyquist charts matched with the theoretical curve to them and in the form of parameters characterizing the corrosion process. Obtained results were statistically analysed. Better resistance to electrochemical corrosion was found for the native material then joint welded by FSW of 7020 aluminum alloy. Worse corrosion properties were observed in the advancing side of the weld than in the retreating side of the weld. Original value are received results of the corrosion properties distribution of FSW welded AW-7020 aluminium alloy.
Źródło:: Journal of KONES; 2014, 21, 4; 79-85
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Effects of Process Parameters on Tensile Shear Strength of Friction Stir Spot Welded Aluminium Alloy (EN AW 5005)
Wpływ parametrów procesu wytwarzania na wytrzymałość na ścinanie zgrzewanego tarciowo stopu aluminium (EN AW 5005)
Autorzy:: Kulekci, M. K.
Powiązania:: https://bibliotekanauki.pl/articles/354272.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: friction stir spot welding (FSSW)
FSSW
friction stir welding
welding
aluminium
zgrzewanie tarciowe FSW
wytrzymałość na ścinanie
spawanie
Opis:: Aluminium and its alloys have been used in automotive technology since the first model of the car. The need for aluminium material is getting increased for weight reduction, improved fuel economy and vehicle performance. The amount of the aluminium used in a car is mainly related with joining processes of aluminium alloy. This can be achieved by developing the welding techniques for aluminium alloys. The purpose of this study was to determine the effects of friction stir spot welding parameters on tensile shear strength of friction stir spot welded lap joint EN AW 5005 Aluminium alloy. The variable parameters were tool rotation (rpm), dwell time (s) and the tool pin height (mm). Tensile shear test results indicated that the weld performance was significantly affected by the tool rotation, dwell time and the tool pin height. The results of the study indicates that there are optimum process parameters which give the highest tensile shear strength.
Aluminium i jego stopy są stosowane w produkcji samochodów od pierwszego modelu. Zapotrzebowanie na aluminium rośnie z powodu dążenia do zmniejszenia masy własnej pojazdu, zmniejszeniu zużycia paliwa i poprawy osiągów pojazdu. Ilość aluminium stosowanego w samochodzie jest głównie związana z procesem łączenia stopów aluminium. To może być osiągnięte poprzez rozwój technik spawalniczych dla atopów aluminium. Celem tej pracy było określenie wpły wu parametrów zgrzewania tarciowego FSW, na wytrzymałość na ścinanie zakładkowych złączy ze stopu aluminium EN AW 5005. Zmiennymi parametrami były prędkość obrotowa narzędzia (obr/min), czas (s) i wysokość trzpienia (mm). Wyniki testów ścinania wskazują, że jakość złącza jest istotnie uzależniona od prędkości obrotowej narzędzia, czasu i wysokości trzpienia. Wyniki tej pracy wskazują, że istnieją optymalne parametry zgrzewania tarciowego FSW, które dają najwyższą wytrzymałość na ścinanie.
Źródło:: Archives of Metallurgy and Materials; 2014, 59, 1; 221-224
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: The application of friction stir welding (FSW) of aluminium alloys in shipbuilding and railway industry
Autorzy:: Gesella, G.
Czechowski, M.
Powiązania:: https://bibliotekanauki.pl/articles/245646.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: Friction Stir Welding
FSW
aluminium alloys
welding
shipbuilding industry
mechanical properties
Opis:: The article describes possibilities of application of friction stir welding (FSW) in shipbuilding and railway industry. Actually, in these sectors of industry more and more often modern construction materials are used. The biggest restriction of implementing new materials is technological possibility of joining them. One of construction materials used in the shipbuilding is aluminum, mainly its alloy of 5xxx-aluminium-magnesium series. Its application is justified by good corrosion resistance in seawater and good mechanical attributes. Thanks to susceptibility to plastic treatment, one gains good mechanical attributes with thrice-smaller density than a density of steel, what causes triple reduction of weight of aluminum construction relative to steel one. Alloys of 5xxx series are well weldable. It is generally known that welding is not a good way to joint metals, especially the aluminum. The application of FSW with mixing allows one to change approach to production of aluminum constructions. Using aluminum plates prefabricated with FSW method allows one to reduce time needed for installation of construction and considerably decreases the production costs. The article describes technology and directions of development of friction welding of aluminum alloys of 5xxx series using FSW method. There is also shown analysis of its usefulness in ship and railway industry and comparison of mechanical attributes of weld made with electric arc using MIG (135), TIG (141) method and FSW method.
Źródło:: Journal of KONES; 2017, 24, 2; 85-90
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Properties of advancing side of weld in joint welded by FSW
Autorzy:: Dudzik, K.
Powiązania:: https://bibliotekanauki.pl/articles/248070.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: friction stir welding
FSW
welding
aluminium alloys
advancing side of weld
Opis:: The results of mechanical and corrosion properties research of chosen part of joint bonded by Friction Stir Welding – advancing side of the weld, were presented. AW-7020 aluminium alloy was used for research. Research included the following methods: - mechanical properties were carried out using static tensile test in accordance with PN-EN ISO 4136:2011 and PN-EN ISO 6892-1:2010, - Hardness testing in the cross-sections of joints was carried out using Vickers HV5 method in accordance with PNEN ISO 6507-1:2006, - microscopic examination was performed by optical microscope ZEISS Axiovert 25, - the corrosion resistance research was carried out using electrochemical impedance spectroscopy (EIS) method in 3.5% water solution NaCl. During the study obtained higher strength properties for the FSW joint compared to the native material – all samples cracked in the native material. The hardness test shown, that the advanced side of the weld has the highest value of hardness of completely joint. Better resistance to electrochemical corrosion was found for the native material then joint welded by FSW of 7020 aluminum alloy, including the advancing side of the weld. Original value is received results of the mechanical and corrosion properties of advancing side of the weld of FSW welded AW-7020 aluminium alloy.
Źródło:: Journal of KONES; 2014, 21, 3; 75-80
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Mechanical properties of AW-5083 alloy joints welded by hybrid method : FSW and MIG
Autorzy:: Dudzik, Krzysztof
Powiązania:: https://bibliotekanauki.pl/articles/241583.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: hybrid welding
Friction Stir Welding
FSW
welding
MIG
aluminium alloys
joints
mechanical properties
shipbuilding
Opis:: The article presents the research results on the mechanical properties of aluminum alloy AW-5083 and its joints welded by hybrid method – traditional MIG and FSW. AW-5083 alloy is the most currently used in shipbuilding industry. Friction Stir Welding (FSW) – a new technology can be successfully used for butt-welding of different types of aluminum alloy sheets. FSW method can be an alternative to traditional arc welding methods i.e. MIG or TIG. Hybrid welding (FSW with MIG or TIG) could be used in cases when joining only by FSW is not possible. Welding parameters used for the connection of the sheets were presented. Metallographic analysis showed the correct construction of structural bonded joints. The research was carried out using a static tensile test in accordance with the requirements of the Standard PN-EN ISO 4136:2013-05. Flat samples cut perpendicular to the direction of rolling were used. The research was conducted at the temperature of +20ºC. The test shows that the mechanical properties of joints made by hybrid method compered to native material were lower. The tensile strength of joint was lower by 20% then native material 5083 while its yield stress was lower only about 6%. The biggest change was observed in case of plastic properties. Elongation of joint was over 50% lower compared to native material. Despite the decrease of mechanical properties, they meets the requirements of classification societies, so the conclusion is that hybrid method (FSW and MIG) of joining AW-5083 can be applied in shipbuilding industry.
Źródło:: Journal of KONES; 2019, 26, 4; 47-52
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "friction stir welding (FSW)" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język